• Wind and Structures
• /
• 제20권4호
• /
• pp.549-564
• /
• 2015

The three-dimensional unsteady incompressible Reynolds-averaged Navier-Stokes equations and k-${\varepsilon}$ double equations turbulent model were used to investigate the effect on the measurements of anemometers due to a passing high-speed train. Sliding mesh technology in Fluent was utilized to treat the moving boundary problem. The high-speed train considered in this paper was with bogies and inter-carriage gaps. Combined with the results of the wind tunnel test in a published paper, the accuracy of the present numerical method was validated to be used for further study. In addition, the difference of slipstream between three-car and eight-car grouping models was analyzed, and a series of numerical simulations were carried out to study the influences of the anemometer heights, the train speeds, the crosswind speeds and the directions of the induced slipstream on the measurements of the anemometers. The results show that the influence factors of the train-induced slipstream are the passing head car and tail car. Using the three-car grouping model to analyze the train-induced flow is reasonable. The maxima of horizontal slipstream velocity tend to reduce as the height of the anemometer increases. With the train speed increasing, the relationship between $V_{train}$ and $V_{induced\;slipstream}$ can be expressed with linear increment. In the absence of natural wind conditions, from the head car arriving to the tail car leaving, the induced wind direction changes about $330^{\circ}$, while under the crosswind condition the wind direction fluctuates around $-90^{\circ}$. With the crosswind speed increasing, the peaks of $V_X,{\mid}V_{XY}-V_{wind}{\mid}$ of the head car and that of $V_X$ of the tail car tend to enlarge. Thus, when anemometers are installed along high-speed railways, it is important to study the effect on the measurements of anemometers due to the train-induced slipstream.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.76-85
• /
• 1993

자유표면과 수면하 vortex 유동과의 상호작용으로 생기는 수면위의 특이 형상을 실험과 수치해석으로 얻어진 결과에 근거하여 논하였다. 먼저 2차원적인 실험이나 해석적인 연구로 이해될 수 있는 "striation"의 발생을 살펴 본다. "Scar"라 불리우는 striation과 수직한 형상은 2차원 vortex filament와 vortex pair 생성시 생겨나는 residual vortex의 상호작용으로 설명하였다. 간단하면서도 중요한 상호작용의 역학을 연구할 목적으로 vortex ring이 자유표면과 수직하게 충돌할 경우에 나타나는 현상들을 실험적으로 논하였고 이때 상호작용의 초기단계를 축대칭 문제로 하여 수치해석적으로 얻어진 결과와 비교하였다. 상호작용의 후기단계는 vortex reconnection을 포함하는 복잡한 과정인데 이때 수면에서의 짧은파 생성을 vortex ring의 수면과의 경사진 충돌로 설명하였다. 또한 위의 수면과 생성을 간단한 해석적 model로 재구성하여 비교해 보았다. 끝으로 수면위에 존재하는 오염물질이 수면하 vortex 유동에 미치는 영향을 수치해석적인 방법으로 free slip및 rigid wall 조건의 경우와 비교하여 살펴보았다.