• Journal of Environmental Science International
• /
• v.4 no.2
• /
• pp.139-150
• /
• 1995

The Quantitative estimations of the stratification - destratification(SD) phenomena in Deukryang Bay, Korea have been carried out based on the data of wind speed, heat flux through the sea surface and tidal current amplitude. To find out the main factors causing SD, wv introduce the rate of energy balance of the surface heat flux, tidal and wind stirring proposed by Simpson and Hunter(1974). The calculated potential energy of three terms are compared, from which the energy of wind stirring effect was one order smaller than the heat flux and the tidal stirring. Using the results, we complement time integration of the potential energy with the several s values of 0.010~0.014 at interval 0.001 and with wind speeds of 1.5 and 2.0 times larger than observation values at land. It shows that the variation of SD phenomena in the bay mainly depended on tidal stirring and sea surface heating in summer if there is no exceptionally strong wind event like Typhoon. The stratification become to be foamed from about 5 July although the stratification a little decreases during the second spring tidal period of middle of July.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.2
• /
• pp.5-14
• /
• 2024

A study approached the development of a process for efficiently recycling discarded cigarette butts, reported as a major source of microplastic pollution in aquatic environments. Cigarette butts were sorted to extract filters, and cellulose acetate, the raw material of the filters, was extracted to a high degree of purity. The sorting of filters from cigarette butts was conducted through both wet and dry processes, each with optimized sorting conditions. Wet stirring sorting considered factors such as solid-liquid ratio, stirring speed, and stirring temperature. The highest efficiency of wet stirring sorting, at 46.21%, was observed with a solid-liquid ratio of 1:45, stirring speed of 200 rpm, and stirring temperature of 50℃. Dry wind power sorting took into account moisture content and residence time. The filter sorting efficiency reached its peak at 57.10% with a moisture content of 20% and a residence time of 5 minutes. There was no significant difference in the recovery rate of cellulose acetate between the two sorting processes. Dry wind power sorting was deemed a more advantageous process in terms of energy and environmental considerations within the scope of this study.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.229-235
• /
• 2000

The spherical silica powder was synthesized by varying the kinds of solvent and mixing energy in emulsion method. The stirring speed varied from 500 to 1000 r.p.m. at 5$0^{\circ}C$ for 2h. Toluene in benzyl groups and a series of alkanes were used as dispersant. The average size of spherical silica particles decreased with increasing the stirring speed and the chain length o solvents used in this work. The average size was controlled in the range of 134~28$\mu\textrm{m}$ by selecting a proper solvent and stirring speed. The optimum processing parameters were described in details.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.3
• /
• pp.256-263
• /
• 1995

This paper presents the evidence on the considerably strong stratification - destratification(SD) phenomena during spring - neap tidal cycle in summer of 1992 based on the observed temperature, salinity and density data. To find out the main factors causing SD in the bay, we computed the rate of potential energy balance of the surface heat flux, tidal and wind stirring proposed by Simpson and Hunter (1974) and Simpson and Bowders (1981) using observed data. It was found that the energy of the wind stirring was one - order smaller than those of the heat flux and the tidal stirring. It means that the variation of stratification phenomena in the bay mainly depend on tidal stirring and sea surface heating in summer if there was no exceptionally strong wind event like a typhoon. Finally, we tested the effects of typhoon on the mixing characteristics of the bay using the example of a empirical typhoon model. It was found that when wind speed is larger than 15m/sec in Deukryang Bay, the wind energy was always larger than the average heating energy based on empirical typhoon model test. Particularly, typhoon passed on the left side of the bay, strong wind energy happened, which is almost the same as tidal energy of spring tide.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.35-43
• /
• 2021

In this study, Na2SO4 and KCl reagents were used to synthesize K2SO4 as a basic study for recycling byproducts generated during the manufacture of steel and cement. The mole ratio of Na2SO4 to KCl, the saturation of the solution, and the stirring temperature were controlled to derive the optimal manufacturing conditions. The microstructure and crystallinity of the materials prepared were evaluated using scanning electron microscopy and X-ray diffraction analysis. Pure K2SO4 was obtained when the mole ratio of Na2SO4 to KCl was 1:6-18, the saturation of the solution was less than 160%, and the stirring temperature was 20℃, 50℃. The optimal manufacturing conditions to maximize the crystallinity and yield of K2SO4 while minimizing the energy consumption were 1:6 mole ratio of Na2SO4 to KCl, 140% saturation of the solution, and 20℃ stirring temperature.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.43-48
• /
• 2016

Cement manufacturing plant uses various kinds of industrial/municipal waste. The waste contains considerable amount of potassium, chlorine and small amount of heavy metal. Many researches were performed to fabricate valuable resources from the waste. In this study, various methods, which dissolves and crystallizes potassium/chlorine to extract potassium chloride, were experimented. Especially amount of water, slurry temperature, and stirring time were controlled. Then kind of heavy metal and content of potassium chloride were analyzed. The yield of potassium chloride increased, as the amount of water for slurry increased but it increased slightly, when the water content was over 200%. The yield tended to increase, when the temperature of slurry was over a certain point. The yield did not increase in case of over 10 minutes stirring time. The kind and content of heavy metal in potassium chloride were various according to stirring time. The main heavy metals were Pb, Cu, and $Cr^{6+}$.

• Corrosion Science and Technology
• /
• v.22 no.6
• /
• pp.457-465
• /
• 2023

Irradiation-assisted stress corrosion cracking (IASCC) is one of the main degradation mechanisms of austenitic stainless steels, which are used as reactor internal materials. Slow strain rate testing (SSRT) has been widely applied to evaluate the IASCC initiation characteristics of proton-irradiated tensile specimens. Tensile specimens require low surface roughness for micro-crack observation, and electropolishing is the most important specimen pre-treatment process used for this. In this study, optimal electropolishing conditions were examined through analyzing results of polarization experiments and surface roughness measurements after electropolishing. Corrosion cell and electropolishing equipment were fabricated for polarization tests and electropolishing experiments using SSRT specimens. The experimental parameters were electropolishing time, current density, electrolyte temperature, and stirring speed. The optimal electropolishing conditions for SSRT tensile specimens made of type 316 stainless steel were evaluated as a polishing time of 180 seconds, a current density of 0.15 A/cm², an electrolyte temperature of 60 ℃, and a stirring speed of 200 RPM.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.34-39
• /
• 2022

In this study, effects of ultrasonic energy on the cementation reaction and copper recovery rate were investigated for different types of iron samples, such as plate, chip, and powder, for recovering copper from waste etchant, which contained ~3.5% copper. The cementation reaction using the ultrasonic energy was more effective than the simple stirring reaction, with the former exhibiting a high copper recovery rate than the latter for the same time interval. When cementation was performed for 25 min with ultrasonic treatment, rather than simple stirring, the copper recovery rate of the plate, chip, and powder improved from 7.0% to 12.0%, 14.0% to 46.1%, and 41.9% to 77.2%, respectively. Therefore, the use of ultrasonic energy could detach the copper recovered by the cementation reaction from the surface of the iron samples, thereby increasing the copper recovery rate. Owing to the use of ultrasonic energy, the copper recovery rate increased by 2-6 times, and the recovered copper exhibited a decreased particle size compared to that obtained via simple stirring.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.82-88
• /
• 2013

There are the stirring test and drain test in the daily performance test to determine the thermal performance of a domestic solar hot water system. The drain test is a test that measures the discharge heating rate while drain the hot water from the top of the storage tank and supply the city water to the bottom of the tank. From the perspective of the user, this drain test is more effective than the stirring test. In this study, the thermal performance were compared through the drain test for a passive type and an active type domestic solar hot water systems consisting of the same storage tank and collectors. At this point, a passive type was used the horizontal storage tanks, and an active type was used vertical storage tank. In the drain test, when the hot water drained up to the reference hot water temperature, an active type which have vertical storage tank represents excellent daily performance than a passive type which have horizontal storage tank regardless of weather conditions. The reason for this is because the vertical storage tank is advantageous to thermal stratification in the tank. After the drain test, the residual heat for the horizontal storage tank was much more than the vertical storage tank, but in the next day the amount of discharged heat were less than the those of vertical storage tank neither. Thus, the solar water heating system which have horizontal storage tank should be adopted preheating control method rather than separate using control method when connected with auxiliary heat source device.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.421-426
• /
• 2004

The extraction and separation of isoflavones from Korean soybean were peformed by various mechanical and chemical extraction methods. They included solvent extraction, stirring, supersonification and sub/supercritical water extraction. From the experimental results of the variation of solvent extraction by change in composition, the increase in extraction of a specific compound by stirring or supersonic energy, and the application of supercritical fluid with superior solvating power over solvents, the sonification was the most desirable extraction method in extracting aglycone isoflavones, daidzein and genistein from Korean soybean.