• 대한토목학회논문집
• /
• 제26권5C호
• /
• pp.351-358
• /
• 2006

본 연구의 목적은 원심모형실험으로 담수에 따른 CFRD 차수벽의 거동을 모사하는 방법 및 절차를 제시하고, 실험결과로 부터 콘크리트차수벽의 휨강성이 차수벽의 변위에 미치는 영향을 살펴보고, 원심모형실험으로 검증된 수치해석을 통하여 차수벽지지죤 강성이 차수벽콘크리트의 변위와 모멘트에 미치는 영향을 평가하는 것이다. 이를 위하여 실제 운영 중인 D댐에 대해 차수벽의 강성을 2가지로 변화시킨 원심모형실험을 수행하였고, 모형체의 축조재료에 대한 삼축압축실험을 수행하고 그 결과를 입력치로 한 수치해석을 통해 원심모형실험을 모사하였다. 모사된 수치해석 결과를 실험결과와 비교하여 수치모형의 적정성을 확인하고 확인된 수치모형에 대해 지지죤 강성을 변화시킨 수치해석을 수행하여 지지죤 강성변화에 따른 콘크리트 차수벽의 연직변위 및 모멘트 발생 양상을 분석하였다. 차수벽 두께를 2가지로 달리한 원심모형실험 결과, CFRD 차수벽 변위는 차수 목적의 콘크리트 두께 범위 내에서는 두께의 영향이 거의 없는 것으로 나타났다. 원심모형실험과 수치해석 결과로부터 담수 시 CFRD 차수벽의 변위 및 최대변위 발생위치는 콘크리트차수벽 휨강성에는 영향이 거의 없고, 차수벽지지죤의 강성이 큰 영향을 주는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제86권3호
• /
• pp.417-430
• /
• 2023

As the key part in the reinforced concrete column-steel beam (RCS) frame, the beam-column joints are usually subjected the axial force, shear force and bending moment under seismic actions. With the aim to study the seismic behavior of RCS joints with and without RC slab, the quasi-static cyclic tests results, including hysteretic curves, slab crack development, failure mode, strain distributions, etc. were discussed in detail. It is shown that the composite action between steel beam and RC slab can significantly enhance the initial stiffness and loading capacity, but lead to a changing of the failure mode from beam flexural failure to the joint shear failure. Based on the analysis of shear failure mechanism, the calculation formula accounting for the influence of RC slab was proposed to estimate shear strength of RCS joint. In addition, the finite element model (FEM) was developed by ABAQUS and a series of parametric analysis model with RC slab was conducted to investigate the influence of the face plates thickness, slab reinforcement diameter, beam web strength and inner concrete strength on the shear strength of joints. Finally, the proposed formula in this paper is verified by the experiment and FEM parametric analysis results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.784-793
• /
• 2006

As the number of CFRD constructions increases, the necessity of an accurate assessment on its behavior also has been increasing accordingly. The performance of concrete faced rockfill dam (CFRD) under different water levels is greatly concerned by dam engineers and designers in the world. However, domestic research on CFRD design and construction has yet been insignificant. This study deals with three centrifuge model tests, mainly investigates the deformation of the concrete faced slabs with different face slab stiffness under different water levels. The prototype of a centrifugal model dam is half size of domestic CFRD dam. Detailed material preparation, model design, model set-up, model instrumentation and testing procedures are presented. In order to simulate the prototype concrete faced slab, three kinds of thin fiberglass plates with different thickness was adopted in the three model tests. The water level control facility was specially designed for this experiment to control the water level rise and drawdown during centrifuge flight. Although most of the results from the three model tests are satisfactory, it is also required that the centrifuge test results should be compared with those of numerical analysis and field measurements to analyze the centrifuge test results more in detail.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.787-792
• /
• 2002

The voided slab have many advantages, light weight, high load-distribution capacity, low cost and beautiful appearance, etc. But they have also many cracks due to difficulties in designs and construction, analysis, shrinkage, installation and rising force of voided tube. This paper presents the retrofit effects with steel plate(SP)/carbon fiber sheet(CFS) of RC voided slab. As a results of this study, it proved that the strip pattern has to be profitable than full-face pattern in performance such as crack, ultimate loads, stiffness. Retrofit length has many influence on retrofit effects, as the length increases, performance and stability of end blocks higher. Also, it proved that the retrofit on full-section has to be profitable than voided-section in performance, and the overlay length of CFS is desirable to extent approximately and welding(V-cut) has to be efficient than anchors in SP connection. But the kinds of end block and anchor has not influence on retrofit effects.

• Steel and Composite Structures
• /
• 제37권5호
• /
• pp.589-603
• /
• 2020

This paper presents an investigation of the thermal performance of composite floor slabs with profiled steel decking exposed to fire effects from floor. A detailed finite-element model has been developed by representing the concrete slab with steel decking under of it and steel beam both steel parts protected by intumescent coating. Although this type of floor systems offers a better fire resistance, passive fire protection materials should be applied when a higher fire resistance is desired. Moreover, fire exposed side is so crucial for composite slab systems as the total fire behaviour of the floor system changes dramatically. When the fire attack from steel parts, the temperature rises rapidly resulting in a sudden decrease on the strength of the beam and decking. Herein this paper, the fire attack side is assumed from the face of the concrete floor (top of the concrete assembly). Therefore, the heat is transferred through concrete to the steel decking and reaching finally to the steel beam both protected by intumescent coating. In this work, the numerical model has been established to predict the heat transfer performance including material properties such as thermal conductivity, specific heat and dry film thickness of intumescent coating. The developed numerical model has been divided into different layers to understand the sensitivity of steel temperature to the number of layers of intumescent coating. Results show that the protected composite floors offer a higher fire resistance as the temperature of the steel section remains below 60℃ even after 60-minute Standard (ISO) fire and Fast fire exposure. Obtaining lower temperatures in steel due to the great fire performance of the concrete itself results in lesser reductions of strength and stiffness hence, lesser deflections.

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.141-159
• /
• 2016

Commonly in steel frames, steel beam and concrete slab are connected together by shear keys to work as a unit member which is called composite beam. When a composite beam is subjected to positive bending, flexural strength and stiffness of the beam can be increased due to "composite action". At the same time despite these advantages, composite action increases the strain at the beam bottom flange and it might affect beam plastic rotation capacity. This paper presents results of study on the rotation capacity of composite beam connected to Rectangular Hollow Section (RHS) column in the steel moment resisting frame buildings. Due to out-of-plane deformation of column flange, moment transfer efficiency of web connection is reduced and this results in reduction of beam plastic rotation capacity. In order to investigate the effects of width-to-thickness ratio (B/t) of RHS column on the rotation capacity of composite beam, cyclic loading tests were conducted on three full scale beam-to-column subassemblies. Detailed study on the different steel beam damages and concrete slab damages are presented. Experimental data showed the importance of this parameter of RHS column on the seismic behavior of composite beams. It is found that occurrence of severe concrete bearing crush at the face of RHS column of specimen with smaller width-to-thickness ratio resulted in considerable reduction on the rate of strain increase in the bottom flange. This behavior resulted in considerable improvement of rotation capacity of this specimen compared with composite and even bare steel beam connected to the RHS column with larger width-to-thickness ratio.

• 한국지반공학회논문집
• /
• 제23권10호
• /
• pp.109-119
• /
• 2007

CFRD 형식의 댐 건설이 증가함에 따라 CFRD 거동에 대한 보다 정확한 분석 및 평가가 필요하게 되었다. 수위 변화에 따른 댐 거동은 댐 설계자와 관리자의 주요 관심사이지만, 국내의 경우 관련 연구가 충분히 진행되지 않아 아직도 많은 경우 국외 사례에 의존하고 있는 실정이다. 본 연구에서는 콘크리트 차수벽 강성이 서로 다른 세 가지 원심모형실험을 통해 수위변화에 따른 CFRD 거동을 정량적으로 평가하였다. 원심모형실험은 국내에서 운영 중인 D댐의 1/2크기의 원형으로 수행되었으며, 모형 준비, 설계, 모형 구축, 계측기 설치, 실험 절차를 상세히 제시하였다. 콘크리트 차수벽은 3 종류의 유리섬유판을 통해 모사하였으며, 비행 중 수위조절을 위한 특별히 장치를 고안하였다. 국내 외 댐 계측사례를 수집 정리하여 본 원심모형실험 결과와 비교하였으며, 그 결과 본 원심모형실험은 실제 댐 거동을 비교적 높은 정확도로 모사하였음을 확인하였다.