• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.735-741
• /
• 2011

In the early phase of vehicle development, CAE is conducted as tool for vehicle performance assessment. To maintain acceptable road noise performance, solution for reduced vehicle sensitivity is required. Chassis interface dynamic stiffness characteristics are key component to isolating vibration and noise of road from the vehicle interior. This research provide how to set up the optimized dynamic characteristics under noise effect through DFSS study. CAE-based DOE is performed to build prediction math model, CMS process involves DOE to achieve very fast run times while giving results very comparable. Minimized $95^{th}$ percentile of performance distribution is applied to minimize vehicle sensitivity and road noise levels variation during the optimization process. Finally, the results of optimization were reviewed for performance and robustness.

• 동의신경정신과학회지
• /
• 제14권2호
• /
• pp.145-154
• /
• 2003

Objective : The aims of this study were to show the clinical state and to investigate depression and anxiety by BDI and STAI scale in tension headache patients. Method : The patient group was consisted of the 20 patients with Tension Headache who were treated in Department of Neuropsychiatry, Daejeon University Oriental Hospital from 3 March 2003 to 30 September 2003. The control group was consisted of the 20 patients on physical therapy with cerebaral vascular disorder in the Daejeon University Cheonan Oriental Hospital. The patient group was investigated by various characteristics, and compared with the control group by BDI and STAI scores. Result : 1. The ratio of female was higher, the 40 aged were higher frequence, in distribution of the period of the clinical history, short term within 1 week was the most.. 2. Tension headache was most frequent at whole portion, neck stiffness, shoulder pain, general body weakness were mainly coexited, and the prescription invigorating spleen supplementing qi and tonifying qi and blood. 3. The BDI score was higher in patient group, but there was no significant difference 4. The STAI score was higher in patient group, but there was no significant difference.

• Advances in aircraft and spacecraft science
• /
• 제2권3호
• /
• pp.303-328
• /
• 2015

A design methodology is presented to develop the hingeless control surfaces for MAV using adhesively bonded Macro Fiber Composite (MFC) actuators. These actuators have got the capability to deflect the trailing edge surfaces of the wing to attain the required maneuverability, besides achieving the set aerodynamic trim condition. A scheme involving design, analysis, fabrication and testing procedure has been adopted to realize the trailing edge morphing mechanism. The stiffness distribution of the composite MAV wing is tailored such that the induced deflection by piezoelectric actuation is approximately optimized. Through ground testing, the proposed concept has been demonstrated on a typical MAV structure. Electromechanical analysis is performed to evaluate the actuator performance and subsequently aeroelastic and 2D CFD analyses are carried out to see the functional requirements of wing trailing edge surfaces to behave as elevons. Efforts have been made to obtain the performance comparison of conventional control surfaces (elevons) with morphing wing trailing edge surfaces. A significant improvement in lift to drag ratio is noticed with morphed wing configuration in comparison to conventional wing. Further, it has been shown that the morphed wing trailing edge surfaces can be deployed as elevons for aerodynamic trim applications.

• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.4185-4191
• /
• 2015

최근 철도의 고속화에 따라 철도수송의 안전성에 대한 요구는 증가되며, 기존 선로에 더 무거운 축중의 차량이 운행토록 요구되고 있다. 이러한 요구를 충족하기 위하여 기존 선로의 레일의 중량을 증가시키고, 장대레일화를 진행해왔다. 최근 개발된 H형 침목은 기존의 일자형 PC침목에 비해 저항 특성이 높아 궤도 강성 증대와 궤도틀림 저감을 기대할 수 있으나, H형 침목 부설에 따른 궤도 특성 변화에 대한 연구는 미흡한 실정이다. 본 논문에서는 3차원 유한요소해석을 통하여 H형 침목이 부설된 궤도의 특성을 분석하였다.

• 한국소음진동공학회논문집
• /
• 제21권7호
• /
• pp.674-681
• /
• 2011

In the early phase of vehicle development, CAE is conducted as tool for vehicle performance assessment. To maintain acceptable road noise performance, solution for reduced vehicle sensitivity is required. Chassis interface dynamic stiffness characteristics are key component to isolating vibration and noise of road from the vehicle interior. This research provide how to set up the optimized dynamic characteristics under noise effect through DFSS study. CAE-based DOE is performed to build prediction math model, CMS process involves DOE to achieve very fast run times while giving results very comparable. Minimized 95th percentile of performance distribution is applied to minimize vehicle sensitivity and road noise levels variation during the optimization process. Finally, the results of optimization were reviewed for performance and robustness.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1497-1507
• /
• 2018

Most of previous studies on fire resistance of restrained steel beams neglected creep effect due to lack of suitable creep model. This paper presents a finite element model (FEM) for accessing the fire resistance of restrained high strength Q460 steel beams by taking high temperature Norton creep model of steel into consideration. The validation of the established model is verified by comparing the axial force and deflection of restrained beams obtained by finite element analysis with test results. In order to explore the creep effect on fire response of restrained Q460 steel beams, the thermal axial force and deflection of the beams are also analyzed excluding creep effect. Results from comparison infer that creep plays a crucial role in fire response of restrained steel beam and neglecting the effect of creep may lead to unsafe design. A set of parametric studies are accomplished by using the calibrated FEM to evaluate the governed factors influencing fire response of restrained Q460 steel beams. The parametric studies indicate that load level, rotational restraint stiffness, span-depth ratio, heating rate and temperature distribution pattern are key factors in determining fire resistance of restrained Q460 steel beam. A simplified design approach to determine the moment capacity of restrained Q460 steel beams is proposed based on the parametric studies by considering creep effect.

• Steel and Composite Structures
• /
• 제38권6호
• /
• pp.691-703
• /
• 2021

In this study, experiments were conducted to evaluate the flexural performance of prestressed hybrid wide flange (PHWF) beams with hollowed steel webs. A total of four PHWF beams were fabricated, where the width and spacing of the steel webs and the presence of cast-in-place (CIP) concrete were set as the main test parameters, and their flexural behavior and crack patterns, and the longitudinal strain distribution in a section with respect to the width and spacing of the steel webs were analyzed in detail. The experiment results showed that, as the ratio of the width to the spacing of the steel webs decreased, the flexural stiffness and strength of the PHWF beams without CIP concrete decreased. In addition, in the case of composite PHWF beam with CIP concrete, fully composite behavior between the precast concrete and the CIP concrete was achieved through the embedded steel member. Finite element analyses were performed for the PHWF beams considering the bond properties between the hollowed steel webs and concrete, and nonlinear flexural analyses were also conducted reflecting the pre-compressive strains introduced only into the bottom flange. From the comparison of the test and analysis results, it was confirmed that the analysis models proposed in this study well evaluated the flexural behavior of PHWF beams with and without CIP concrete.

• 콘크리트학회논문집
• /
• 제19권6호
• /
• pp.727-734
• /
• 2007

철근과 fiber-reinforced polymer (FRP)의 물리적, 역학적 특성의 차이 및 슬래브 상부 보강재의 기둥 인접부 집중 배근, 그리고 기둥 인접부 슬래브에 강섬유 콘크리트 (SFRC)의 타설 등에 따른 2방향 슬래브의 펀칭 전단 거동에 대한 효과를 평가하였다. 펀칭 전단강도, 강성, 연성, 변형률 분포 그리고 균열 제어 성능 등을 파악하였다. 실험 결과 기둥 인접부의 슬래브에 집중 배근을 하거나 SFRC를 타설하는 것은 glass fiber-reinforced polymer (GFRP) 바로 보강된 슬래브의 펀칭 전단 거동을 향상시켰다. 기둥 인접 구역에 집중 배근된 슬래브의 실험 결과를 다양한 설계기준과 타 연구자에 의해 제안된 예측식과 비교하였으며, 집중 배근으로 인한 이점을 예측식에 반영할 수 있도록 집중 배근된 슬래브의 철근비를 산정하는 합리적인 방법도 제안하였다.

• Composites Research
• /
• 제34권4호
• /
• pp.257-263
• /
• 2021

복합재료는 높은 비 강성 및 비 강도 특성으로 인해 기체 혹은 액체 연료를 저장하기 위한 압력 용기의 설계 및 제작에 널리 활용되고 있다. 이에 따라, 압력용기의 파열압력 또는 파단 변형률의 기계적 특성의 보다 정확한 측정은 상용화 전에 필수적 요소이다. 그러나, 기존의 시험방법을 활용한 복합재료 압력 용기의 안전성 검증은 하중 전달 매체의 변형으로 인한 추가적인 에너지 손실의 발생과, 불필요한 하중 및 모멘트의 발생 등의 한계가 있다. 따라서 본 연구에서는 수직기둥의 이론적인 하중전달 정도와 적용 가능한 수직방향 변위를 고려하여 세그먼트형 링 버스트 시험장치를 설계하였다. 또한, 세그먼트 형 링 버스트 시험장치의 균일한 압력분포를 검증하기 위해 수치해석을 활용하였고, 수압 시험방법과 링 시편의 원주방향 응력 및 변형률 분포를 비교하였다. 복합재료 압력용기의 파괴 거동을 모사하기 위해 Hashin 파손 기준을 적용하였고, 실험적으로 파단 변형률을 측정하여 이를 수치해석 결과와 비교하였다.

• 한국철도학회논문집
• /
• 제15권6호
• /
• pp.623-630
• /
• 2012

궤도하부층의 지지강성을 확보하기 위하여 설치하는 강화노반은 통상 일정 입도분포의 쇄석재료로 구성된다. 이러한 강화노반은 통과톤수의 누증 즉, 과도한 열차하중이 반복적으로 가해질 경우 영구변형이 발생할 수 있으며 이러한 영구변형은 궤도틀림의 한 원인이 될 수 있다. 또한 강화노반 재료의 적정두께를 확정하기 위해서는 이러한 영구변형 특성을 파악하는 것이 중요하다. 본 연구에서는 국내 강화노반 재료로 사용될 가능성이 높은 M-40 쇄석재료를 선정하여 대형반복삼축시험을 실시하여 재료의 회복탄성 특성과 영구변형 특성을 분석하였다. 시험으로부터 임의 전단응력비 및 반복재하횟수에 따른 회복탄성계수 특성과 영구변형 발생특성을 분석하였으며 M-40 쇄석강화노반 재료의 영구변형에 영향을 미치는 인자(반복재하횟수, 구속압, 전단응력비, 탄성계수 등)를 함께 고려할 수 있는 영구변형 예측모델을 제시하였다.