• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.132-136
• /
• 1996

A Study is a experiment which is figure out to aptimum discharge cutting condition of the surfaceroughness, electric discharging speed and electro wear ratio with Ton Toff and V(voltage) as an input condition according to the current(Ip) in an electric spark machine ; 1)Electrode is utilized Cu(coper) and Graphite. 2)Work piece is used the material of carbon steel. The condition of experiment is; 1)Current is varied 0.7(A) to 50(A). 2)Pulse time(Ton) is varied 3($\mu$s) to 240($\mu$s) and also Toff is varied 7($\mu$s) to 20($\mu$s). 3)The time of electric discharging to work piece in each time is 30(min) to 60(min) 4)After the upper side of work piece was measured in radius (5${\mu}{\textrm}{m}$) of syulus analyzed the surface roughness to made the table and graph of Rmax by yielding data. 5)Electro wear ratio is; \circled1Coper was measured cx-machining and post machining but the electronic baiance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume specific gravity and analyzed to made its table and graph on ground the data 6)In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V.R(Automatic Voltage Regulator). 7)The memory scope was sticked to the electric spark machine. 8)In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid, it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging According to above results, the surface roughness by the variation of electrodw and current was analyzed to compare KS(Korea Standards) It was decided the optimum condition of electric discharge cutting through analyzing the effect of electric discharge speed and electro wear ratio.

• 분석과학
• /
• 제13권1호
• /
• pp.5-11
• /
• 2000

시운전중인 국내 최대 규모의 유동층 보일러에서 발생한 크링커의 생성원인을 규명하기 위해 현장에서 크링커 및 사용중인 무연탄의 회, 모래, 석회석을 채취하였다. 발전소에서 시행중인 운전조건을 고려하여 이들에 대한 비율별 및 온도 조건 변화에 따른 각 시료의 성분 분석, 표면형상 관찰, 열특성 분석 및 결정구조 분석을 실시하였다. 크링커는 횐 색과 검은 색 및 갈색 부분으로 되어 있었으며 이를 색깔별로 크게 흰 색 및 검은 색으로 구분하여 실험을 하였다. 그 결과 검은 색은 모래, 흰 색은 무연탄 회에 보다 유사한 특성을 지녔고, 온도에 따른 실험 결과, 모래의 소결온도는 $1,200^{\circ}C$ 이상의 고온인 반면에 모래에 석회석을 혼합할 경우, 소결온도가 낮아짐을 알 수 있었다. 따라서 크링커의 생성원인은 유동층 보일러 내에 고온부가 형성되어 모래와 석회석이 용융 또는 소결된 상태에 무연탄회가 부착되어 형성된 것으로 판단되었다.