• 한국터널지하공간학회 논문집
• /
• 제9권2호
• /
• pp.121-131
• /
• 2007

최근 암반구조물의 규모가 점차 대형.대단면화됨에 따라 암반 절리면이 자유면에 노출되는 경우가 빈번하게 발생할 수 있으며 지진, 발파와 같은 외부 동적 하중의 영향을 받을 가능성이 커지고 있으므로 다양한 동적 하중조건 하에서 암반 불연속면의 거동 특성 파악을 위한 연구의 필요성이 증대되고 있다. 본 연구에서는 전단속도의 변화에 따른 편평한 화강암 전단면의 마찰특성 변화를 알아보고자 다양한 조건하에서 직접전단시험을 수행하였다. 수행한 직접전단시험은 크게 두 가지로 나눌 수 있는데 첫 번째 시험에서는 시험이 수행되는 동안 각각 7가지의 일정한 전단속도로 전단변위가 발생되도록 하여 전단속도에 따른 마찰계수의 변화를 살펴보았으며, 두 번째 시험에서는 전단변위가 발생되는 중간에3가지 형태의 순간적인 전단속도 변화가 마찰특성에 미치는 영향을 살펴보았다. 수직응력과 전단속도의 변화에 따른 편평한 화강암의 마찰계수 변화는 가해진 수직응력 수준에 영향을 받는 것으로 나타났으며, 전단속도의 변화가 마찰거동에 영향을 미치기 시작하는 전이속도는 수직응력이 증가함에 따라 낮아지는 것으로 나타났다. 또한 전단속도가 느릴수록 stick-slip 거동에서의 응력 저하 폭이 커지는 경향을 보였다. 순간적인 전단속도 변화에 따른 정상 상태에서의 마찰계수 변화를 살펴본 결과 순간적인 속도의 증가에 따라 마찰계수가 감소하는 속도 연화 현상이 나타났으며, 느린 전단속도에서 전단속도의 변화에 따른 마찰계수의 감소폭이 빠른 전단속도에서의 변화에 따른 감소폭보다 더 큰 경향을 보였다.

• 한국과학교육학회지
• /
• 제30권7호
• /
• pp.901-907
• /
• 2010

The purpose of this study is to analyze methods for measuring the size of the Earth, put forth in 6 different Korean 8th grade science textbooks. The research questions are as follows: 1) Do they adequately map out the experiments for measuring the size of the earth by using the concept of the sun's altitude? 2) Do they reduce the size of the sun like as the Earth is similarly downsized to the globe? 3) Do they suggest the precise experimental conditions for selecting two equal longitudinal spots for measuring the size of the earth? 4) Do they design adequate experiments for exact measurement? 5) Do they offer a proportional expression for seeking the size of globe which is easily understood by students? 6) Do they develop experiments to measure actual size of the earth? Four graduate students and one researcher took part in this study. All conditions were unanimously agreed upon by the participants. The results are as follows. First, one publishing company must include the concept of the sun's altitude to accurately measure the size of the Earth. However, some textbooks fail to mention this. As such, the concept of the sun's altitude must be introduced to accurately measure the size of the Earth. Second, a reduced size globe is used as the actual earth so; the sun should be factored in with a reduced light value. Third, you have to lay a stress on two points at the same longitude. In other words, a shadow located at the same longitude from two randomly selected points. Most textbooks mention two points at the same longitude but two of them design the experiment with a shadow at the same longitude. Fourth, we need a method to precisely measure the angle between a stick and its shadow. The angle between the stick and the tip of its shadow is the sun's altitude difference. Fifth, we need to present more specific proportional expressions for calculating the size of the globe. Only 3 out of the 6 texts employed a proportional expression. Sixth, we need to calculate the size of the earth by accurately presenting the scale of the globe to attain the goal of the experiment. Two of the texts analyzed, designed the experiment for the purpose of calculating the size of the globe. Three of the texts designed their experiments to calculate the radius of globe which is not even relevant to the purpose of experiment.

• 한국미생물·생명공학회지
• /
• 제13권4호
• /
• pp.409-415
• /
• 1985

시판 어육연제품의 보장성과 식품위생학적인 기초자료를 얻고자 1984년 5월부터 10월사이에 연제품 가공공장과 수퍼마켓등에서 구입한 게맛살, 판어묵, 부들어묵, 튀김어묵 및 어육소시지등 5종총 70점의 시료를 대상으로 세균학적 품질, 세균특징별 분포, 내열성세균의 배양적 세균학적 특성에 관하여 조사한 결과는 다음과 같다. 1. 가열후에 포장하는 부들어묵과 튀김어묵은 위생지표세균 및 효모와 곰팡이의 오염이 대체로 높았으며, 가열전에 포장하는 게맛살과 판어묵은 세균학적으로 매우 깨끗하였다. 포도상구균은 튀김어묵에서만이 검출되었으며, Salmonella균은 모든 제품에서 검출되지 않았다. 가공공장 시료에서 연제품 가공공정중 열처리전의 게맛살과 판어묵 시료중에 호기성 및 염기성균이 $10^{6}$-$10^{7}$ g으로 함량이 높았으나, 열처리직후의 제품은 호기성균이 ＜$10^2$/g 이었으며 염기성균은 검출되지 않았다. 그리고 어육소시지에서는 전혀 세균이 검출되지 않았다. 2. 분리된 세균중 단백질분해능이 있는 세균의 분포는 대부분의 시료에서 87% 이상으로 높았고, 지방분해능이 있는 세균의 분포는 20%미만이었다. 3. 분리된 세균에 대한 Gram 염색결과는 게맛살과 판어묵에서는 Gram양성균이 70%이상이었고 튀김어묵에서는 47.3%이었으며, 형태별로는 간균이 분리균주의 90%이상을 차지하였다. 4. 분리균중 내열성이 제일 강한 균주는 Bacillus licheniformis CR-11이었는데, 단백질분해능이 있을 뿐 아니라 2$0^{\circ}C$이상에서는 발육이 양호하였으며 또한 염기적 조건에서도 발육이 좋았다. 5. CR-11 균주의 배양온도별 비증식속도와 평균세대시간은 2$0^{\circ}C$에서 각각 0.31$hr^{-1}$, 2.24hr, 3$0^{\circ}C$에서 0.64$hr^{-1}$, 1.09hr, 그리고 35$^{\circ}C$에서는 0.78$hr^{-1}$, 0.89hr이었고, 포자의 내열성은 D$_{85}$ $^{\circ}C$=41.9min, D$_{90}$ $^{\circ}C$=27.9min, D$_{95}$ $^{\circ}C$=10.2min, D$_{100}$ $^{\circ}C$=4.3min이었으며, Z-value는 13.8$^{\circ}C$이었다.

• 한국학교ㆍ지역보건교육학회지
• /
• 제16권2호
• /
• pp.89-100
• /
• 2015

Objectives: This study was carried out to measure knowledge, attitude, and practice and related factors of low-salt diet among university students. Methods: Data from a convenience sample of 251 nursing and engineering students of two universities in south-western part of Korea were collected during March 16~20, 2015 using a self-reporting questionaire and urine test. The instruments developed by Lee and Song(1999) were used to measure knowledge and practice, and Ahn(2013) for attitude toward low-salt diet. A spot urine salt stick($SaltSinal^{(R)}$) was also used to evaluate practice of low-salt diet. Data were analyzed using SPSS 21.0, and t-tests, ANOVA, Pearson correlation, and Scheffe test were used. The study was IRB approved. Results: Knowledge, attitude, and practice of low-salt diet was low and spot urine salt level was high among university students. Knowledge and attitude were higher and spot urine salt level was lower among nursing students. Knowledge and attitude were related to gender and drinking. Living arrangement, monthly allowance, smoking, frequency of eating-out, frequency of breakfast were shown not to be related to knowledge and attitude. None of the variable investigated were significantly related to practice of low-salt diet. However, spot urine salt was related with gender, living arrangement, and smoking. Conclusions: A rigorous health education is necessary in order to lower dietary salt among university students. Considering frequent eating-out among university students, it is also very important to lower salt amount in foods sold on- and off-campus.

• BMB Reports
• /
• 제51권9호
• /
• pp.437-443
• /
• 2018

Non-homologous end joining (NHEJ), and to a lesser extent, the error-free pathway known as homology-directed repair (HDR) are cellular mechanisms for recovery from double-strand DNA breaks (DSB) induced by RNA-guided programmable nuclease CRISPR/Cas. Since NHEJ is equivalent to using a duck tape to stick two pieces of metals together, the outcome of this repair mechanism is prone to error. Any out-of-frame mutations or premature stop codons resulting from NHEJ repair mechanism are extremely handy for loss-of-function studies. Substitution of a mutation on the genome with the correct exogenous repair DNA requires coordination via an error-free HDR, for targeted transgenesis. However, several practical limitations exist in harnessing the potential of HDR to replace a faulty mutation for therapeutic purposes in all cell types and more so in somatic cells. In germ cells after the DSB, copying occurs from the homologous chromosome, which increases the chances of incorporation of exogenous DNA with some degree of homology into the genome compared with somatic cells where copying from the identical sister chromatid is always preferred. This review summarizes several strategies that have been implemented to increase the frequency of HDR with a focus on somatic cells. It also highlights the limitations of this technology in gene therapy and suggests specific solutions to circumvent those barriers.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권7호
• /
• pp.801-807
• /
• 2005

Any failure of intake and exhaust valves of marine diesel engine must be regarded as serious, and any steps which can be taken to prevent such failure are desirable. The purposes of this study is to investigate and to analyse the failure causes of intake and exhaust valves for marine diesel engine during sea trial after completion of overhauling. In this study, to analyse the failure causes, we have carried out on board inspection, fractography test and discussion based on the specimen and repairing report provided by the ship owner. From the results of above inspection, test and discussion, it has been considered reasonable to conclude that the causes of damaged valves of the ship are as follow ; 1) During operation, the stick or seizure of valve spindle occurred and hence the movement of exhaust valve spindle was to be resisted and subsequently the engine was to be operated under an unappropriated valve timing and the exhaust valve sustained the repeated loads exceeding the fatigue strength of valve material. 2) By the loads above described, the fatigue fracture was initiated at the structural noncontinuous part of exhaust valve spindle, and then the valve head was finally fractured and dropped in the cylinder. 3) The fractured exhaust valve head impacted the intake valve at various direction to be bent or damaged.

• 논리연구
• /
• 제13권2호
• /
• pp.135-165
• /
• 2010

이 논문에서 나는 자유론 입장에 대한 터너의 비판에 대해 고찰한다. 그에 따르면, '결과논변'을 포기하지 않는 한, 자유론은 자연주의와 양립할 수 없다. 그는 이러한 주장을 위해 '수반논변'을 제시하는데, 그에 따르면, '수반논변'을 거부하기 위해서는 '결과논변'을 포기하거나 자연주의를 포기해야 한다. 그러나 나는 자유론 입장에서 '결과논변'을 고수한다 하더라도 그의 '수반논변'을 수용할 필요는 없다는 것과 그의 '수반논변'을 수용한다 하더라도 행위자의 자유를 포기할 필요는 없다는 것을 보인다. 이러한 이유들로 나는 자유론 입장에 대한 터너의 비판은 실패한다고 결론짓는다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2000년도 추계학술대회 및 정기총회
• /
• pp.22-25
• /
• 2000

With the dawn of the 21st century, the corporate business environment started to witness the unprecedented, intense competition on global basis. As a result, the kind of corporate business activity that can respond swiftly to the new changes emerged as one of the most critical factors to increase corporate competitiveness. Being reborn as a strategy-focused organization means seeking innovation. And the strategy not involving innovation is just meaningless. It is this innovation that lies at the heart of the corporate strategy, and that is the only way for continuation of the corporation. The most important pending issue facing companies today is to bolster corporate competencies fit for new business environment, to develop corporate culture required for getting competitiveness edge back, and ultimately to put the company on the continued growth path. Corporate culture, as the very underlying belief and philosophy, is not just woven into the fabric of the corporate management strategy and into the way the company is doing its business. It also, as a regulation and norm for its employees to stick by, affects the way they think and behave. This paper aims at presenting the role of the corporate culture in working out problems encountered by companies today, like corporate innovation, instilling vitality to the organization, beefing up the underlying corporate capabilities, and making transformation required by the changing business environment.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.44-49
• /
• 2011

The crawler crane, which consists of a lattice boom, a driving system, and movable vehicle, is widely used in a construction site. It needs to be installed an overload limiter to prevent the overturning accident and the fracture of structure. This research is undertaken to provide the relation formula for designing the overload limiter as follows: First the relation formulas between the wire-rope tension and the hoisting load or the overturning ratio according to the luffing angle and length of a lattice boom are established. Secondly the derived formulas are corrected by using the compensated angle considering the deflection of boom through the finite element analysis. The stiffness analysis is carried out for 30-kinds of models as a combination of 6-kinds of luffing angle and 5-kinds of length of boom. Finally the shape design of a stick type load cell, which is the device to measure the wire-rope tension, is performed. 5-kinds of notch radius and 5-kinds of center hole radius are adopted as the design parameter for the strength analysis of the load cell.

• Structural Engineering and Mechanics
• /
• 제43권4호
• /
• pp.475-502
• /
• 2012

In this paper, the seismic analysis modeling technologies for sodium-cooled fast reactor (SFR) are presented with detailed descriptions for each structure, system and component (SSC) model. The complicated reactor system of pool type SFR, which is composed of the reactor vessel, internal structures, intermediate heat exchangers, primary pumps, core assemblies, and core support structures, is mathematically described with simple stick models which can represent fundamental frequencies of SSC. To do this, detailed finite element analyses were carried out to identify fundamental beam frequencies with consideration of fluid added mass effects caused by primary sodium coolant contained in the reactor vessel. The calculation of fluid added masses is performed by detailed finite element analyses using FAMD computer program and the results are discussed in terms of the ways to be considered in a seismic modeling. Based on the results of seismic time history analyses for both seismic isolation and non-isolation design, the functional requirements for relative deflections are discussed, and the design floor response spectra are proposed that can be used for subsystem seismic design.