• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.277-284
• /
• 2004

The subject of this study is to apply experimentally In resolution stereo imagery of IKONOS to producing 1:50,000 scale maps for Munsan area in Paju, being near the Military Demarcation Line, is inaccessible for aerial photography. Ground control points were acquired from GPS surveying to perform geometric corrections on images. Digital maps were produced from IKONOS stereo imagery on the digital photographic workstation. From field investigation, RMS errors of the plane and vertical positions are estimated respectively at $\pm$1.706m and $\pm$1.231m, respectively. These plane and vertical accuracies are within the tolerance limits of those provided in the NGIS Digital Topographic Map Production Rules. Therefore this suggested method is recommended for producing the large scale digital maps of 'No flight' zone near the M.D.L.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.555-560
• /
• 2010

The geoscientists are very interested in a volcanic reactivity of Mt. Baekdu. Periodical observation and monitoring are thus needed to detect the topographic and environmental changes of Mt. Baekdu. It is, however, very restrictive to survey with difficulty of observer's accessibility in the field due to political problems. This study therefore is to produce digital elevation model (DEM) of Mt. Baekdu using SPOT-5 stereo images. The produced DEM is very not accurate because of using without ground control points (GCP). To correct the previously generated DEM, scale-invariant feature transform(SIFT) matching method is adopted with shuttle radar topography mission(SRTM) DEM of NASA Jet Propulsion Laboratory(JPL). The results of the produced DEM to SRTM DEM matching indicate that the corrected DEM from SPOT-5 stereo images has more detail topographic structures. In addition, difference of spatial distances between the corrected DEM and SRTM DEM are much smaller than non-corrected DEM.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.27-38
• /
• 2015

In this study, the 3D position coordinates were calculated for the targets using DLT and self-calibration bundle adjustment with additional parameters in close-range photogrammetry. And then, the accuracy of the results were analysed. For this purpose, the results of camera calibration and orientation parameters were calculated for each images by performing reference surveying using total station though the composition of experimental conditions attached numerous targets. To analyze the accuracy, 3D position coordinates were calculated for targets that has been identically selected and compared with the reference coordinates obtained from a total station. For the image coordinate measurement of the stereo images, we performed the ellipse fitting procedure for measuring the center point of the circular target. And then, the results were utilized for the image coordinate for targets. As a results from experiments, position coordinates calculated by the stereo images-based photogrammetry have resulted out the deviation of less than an average 4mm within the maximum error range of less than about 1cm. From this result, it is expected that the stereo images-based photogrammetry would be used to field of various close-range photogrammetry required for precise accuracy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.157-163
• /
• 2007

Recently, industrialization of a country is accelerated and request of society infrastructure is raised so national land development is activity view. Accordingly, the search for a wide-ranging buried heritage do acted in large construction region. Because the buried heritage get buried in land that it is necessary to the precision search and research for a record and a preservation. Until now, Surveying techniques of a historic site have made status map, profile and cross section map through leveling survey, total-station survey and sketch of specialist. So, to solve problems existing relic survey or drawing making method have using digital camera these researches rapidly and economically obtain stereo image of object and present a technique that constructs 3D image model for digital photogrammetry method. Also, these researches construct 3D image model for record and preservation of a historic site through site test and in 3D and graphical express a historic site and support works that produce other maps if we need it. offer base data of GIS (Geographic Information System) to collect and analyze overall, information of a historic site.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.473-479
• /
• 2019

This study applied SGM (Semi Global Matching) to generate DSM (Digital Surface Model) using WorldView-1 high-resolution satellite stereo pair in Terrassa, Spain provided by ISPRS (International Society for Photogrammetry and Remote Sensing). The SGM is an image matching algorithm that performs the computation of the matching cost for the stereo pair in multi-paths and aggregates the computed costs sequentially. This method finally calculates the disparity corresponding to the minimum (or maximum) value of the aggregation cost. The cost was applied to MI (Mutual Information), NCC (Normalized Cross-Correlation), and CT (Census Transform) in order to the SGM. The accuracy and performance of the outline representation result in DSM by each cost are presented. Based on the images used and the subject area, the accuracy of the CT cost results was the highest, and the outline representation was also most clearly depicted. In addition, while the SGM method represented more detailed outlines than the existing software, many errors occurred in the water area.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.91-97
• /
• 2004

As for the former analogue method of photogrammetry, We have obtained final digital drawing by creating the stereo model from overlapped images through orientation process using plotting instrument and processing restitution procedure. However, digital photogrammetry batch processes such using small computer system thus We make an attempt automatization of the procedures. And without the production of stereo model, We could obtain 3D digital data through analysis method. Therefore, an objective of this study was to implement a surveying system that could 3D surveying positions using the digital image to reduce limitations of control point surveying and photographing conditions more efficiently to produce digital drawing. By the result, photogrammetry can practice and make out digital drawing to a computer by digital camera of a comparative low-cost. Small scale area can become practical use to drawing production etc. for facilities management because area can make out digital drawing economically than general surveying.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.507-510
• /
• 2002

An algorithm of 3-D particle image velocimetry(3D-PIV) was developed for the measurement of 3-D velocity Held of complex flows. The measurement system consists of two or three CCD camera and one RGB image grabber. Flows size is $1500{\times}100{\times}180(mm)$, particle is Nylon12(1mm) and illuminator is Hollogen type lamp(100w). The stereo photogrammetry is adopted for the three dimensional geometrical mesurement of tracer particle. For the stereo-pair matching, the camera parameters should be decide in advance by a camera calibration. Camera parameter calculation equation is collinearity equation. In order to calculate the particle 3-D position based on the stereo photograrnrnetry, the eleven parameters of each camera should be obtained by the calibration of the camera. Epipolar line is used for stereo pair matching. The 3-D position of particle is calculated from the three camera parameters, centers of projection of the three cameras, and photographic coordinates of a particle, which is based on the collinear condition. To find velocity vector used 3-D position data of the first frame and the second frame. To extract error vector applied continuity equation. This study developed of various 3D-PIV animation technique.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.4
• /
• pp.325-331
• /
• 2015

This paper suggests an intersection method to improve the accuracy of three-dimensional position from heterogeneous satellite stereo images, and addresses validation of the suggested method following the experimental results. The three-dimensional position is achieved by determining an intersection point of two rays that have been precisely adjusted through the sensor orientation. In case of conventional homogeneous satellite stereo images, the intersection point is generally determined as a mid-point of the shortest line that links two rays in at least square fashion. In this paper, a refined method, which determines the intersection point upon the ray adjusted at the higher resolution image, was used to improve the positioning accuracy of heterogeneous satellite images. Those heterogeneous satellite stereo pairs were constituted using two KOMPSAT-2 and QuickBird images of covering the same area. Also, the positioning results were visually compared in between the conventional intersection and the refined intersection, while the quantitative analysis was performed. The results demonstrated that the potential of refined intersection improved the positioning accuracy of heterogeneous satellite stereo pairs; especially, with a weak geometry of the heterogeneous satellite stereo, the greater effects on the accuracy improvement.

• Korean Journal of Geomatics
• /
• v.3 no.1
• /
• pp.53-57
• /
• 2003

As the Korea Multi-Purpose Satellite-I (KOMPSAT-1) satellite can roll tilt up to $\pm$45$^{\circ}$, we have analyzed some KOMPSAT-1 EOC images taken at different tilt angles for this study. The required ground coordinates for bundle adjustment and geometric accuracy are obtained from the digital map produced by the National Geography Institution, at a scale of 1:5,000. Followings are the steps taken for the tilting angle of KOMPSAT-1 to be present in the evaluation of geometric accuracy of each different stereo image data: Firstly, as the tilting angle is different in each image, the characteristic of satellite dynamic must be determined by the sensor modeling. Then the best sensor modeling equation should be determined. The result of this research, the difference between the RMSE values of individual stereo images is mainly due to quality of image and ground coordinates instead of tilt angle. The bundle adjustment using three KOMPSAT-1 stereo pairs, first degree of polynomials for modeling the satellite position, were sufficient.

• Korean Journal of Remote Sensing
• /
• v.13 no.2
• /
• pp.121-132
• /
• 1997

This paper describes the development of a stereo matching algorithm for extracting Digital Elevation Model(DEM) from satellite images. This matching algorithm is based on a non-linear least squares correlation estimation but has improved matching speed. The algorithm consists of three steps: matching execution, matching control and matching optimization. Each is described. The performance of the presented algorithm is quantitatively analyzed with experiments on matching probability, matching speed and matching convergence radius.