• 한국의류학회지
• /
• 제24권7호
• /
• pp.1081-1087
• /
• 2000

Gromwell colorants were extracted with methanol and dried. Four fractions were obtained by silica gel adsorption column chromatography using step-wise elution method. Relative ratio of four fraction is 1.00:0.07:0.22:0.30(Fl:F2:F3:F4) and gromwell colorants mainly consist of Fl, F3 and F4. IR analysis shows that each fraction has similar structure. Main component of gromwell extracts is acetyl derivative of naphthoquinone, and the rest are isobutyl derivative and isovaleryl derivative etc., in order. Gromwell colorants exhibit relatively good affinity to protein and polyamide fibers, but low affinity to cellulose and regenerated cellulose fibers.

• 대기
• /
• 제24권3호
• /
• pp.445-456
• /
• 2014

A real-time quality control system for meteorological data (air temperature, air pressure, relative humidity, wind speed, wind direction, and precipitation) measured by an integrated meteorological sensor has been developed based on comparison of quality control procedures for meteorological data that were developed by the World Meteorological Organization and the Korea Meteorological Administration (KMA), using time series and statistical analysis of a 12-year meteorological data set observed from 2000 to 2011 at the Incheon site in Korea. The quality control system includes missing value, physical limit, step, internal consistency, persistence, and climate range tests. Flags indicating good, doubtful, erroneous, not checked, or missing values were added to the raw data after the quality control procedure. The climate range test was applied to the monthly data for air temperature and pressure, and its threshold values were modified from ${\pm}2{\sigma}$ and ${\pm}3{\sigma}$ to ${\pm}3{\sigma}$ and ${\pm}6{\sigma}$, respectively, in order to consider extreme phenomena such as heat waves and typhoons. In addition, the threshold values of the step test for air temperature, air pressure, relative humidity, and wind speed were modified to $0.7^{\circ}C$, 0.4 hPa, 5.9%, and $4.6m\;s^{-1}$, respectively, through standard deviation analysis of step difference according to their averaging period. The modified quality control system was applied to the meteorological data observed by the Weather Information Service Engine in March 2014 and exhibited improved performance compared to the KMA procedures.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.154-163
• /
• 2009

The groutability depends on the properties of the grout, its injection processes, and on the mechanical properties of the soil formation. During the process of pouring cement-based grouting into a porous medium, a variation with time occurs in the viscosity of grout suspension. In addition the particle filtration phenomenon will limit the expansion of the grouted zone because cement particles are progressively stagnant within the soil matrix. In this paper, a closed-form solution was derived by implementing the mass balance equations and the generalized phenomenological filtration law, which can be used to evaluate the deposition of cement-based grout in the soil matrix. The closed-form solution relevant to a particular spherical flow was modified by a step-wise numerical calculation, considering the variable viscosity caused by a chemical reaction, and the decrease in porosity resulting from grout particle deposition in the soil pores. A series of pilot-scale chamber injection tests was performed to verify that the developed step-wise numerical calculation is able to evaluate the injectable volume of grout and the deposition of grout particles. The results of the chamber injection tests concurred well with that of the step-wise numerical calculation. Based on the filtration phenomenon, a new groutability criterion of cement-based grout in a porous medium was proposed, which might facilitate a new insight in the design of the grouting process.

• 한국수자원학회논문집
• /
• 제46권6호
• /
• pp.585-596
• /
• 2013

본 연구에서는 기후변화에 따른 수자원 영향평가를 위한 지역기후모형과 단계적 스케일링기법을 연계한 혼합상세화기법을 개발하고 그에 따른 적용성을 평가하고자 하였다. 단계적 스케일링기법은 강수량 구간을 총 3구간(극치호우사상, 무강수일수, 기타)으로 나누어 각 구간에 따라 각기 다른 방법을 적용하여 보정하는 기법으로, 극치호우사상은 회귀식을 이용한 보정기법, 무강수일수는 분위사상법, 나머지 부분은 평균 및 분산보정 기법을 적용하였다. 이 기법의 비교 평가를 위해 최근 혼합 상세화기법으로 가장 많이 적용되고 있는 선형보정기법, 분위사상법, 일기상발생기법을 활용하여 기상청 관할 기상관측소 61개 지점을 대상으로 적용성 평가를 수행하였다. 평가 결과, RCM에서 생산된 원자료 및 3가지 기존 기법(선형보정기법, 분위사상법, 일기상발생기법)으로 보정된 기후시나리오에 비해 본 연구에서 제안한 단계적 스케일링기법이 실제 기후특성을 잘 모의하는 것으로 나타나 적용성이 우수한 것으로 판단된다. 이러한 연구결과를 통해 단계적 스케일링기법은 RCM 사용이 증대될 기후변화 연구에 있어 그 활용성이 높을 것으로 기대된다.

• 한국멀티미디어학회논문지
• /
• 제10권12호
• /
• pp.1577-1584
• /
• 2007

Fingerprint verification is being adopted widely to provide positive identification with a high degree of confidence in all practical areas. This popular usage requires reliable methods for matching of these patterns. To meet the latest expectations, the paper presents a pair wise distance histogram method for fingerprint matching. Here, we introduced a randomized algorithm which exploits pair wise distances between the pairs of minutiae, as a basic feature for match. The method undergoes two steps for completion i.e. first it performs the matching locally then global matching parameters are calculated in second step. The proposed method is robust to common problems that fingerprint matching faces, such as scaling, rotation, translational changes and missing points etc. The paper includes the test of algorithm on various randomly generated minutiae and real fingerprints as well. The results of the tests resemble qualities and utility of method in related field.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 자동차부품 제작기술의 진보
• /
• pp.97-109
• /
• 1996

In the present work computations are carried out for analysis of complicated sheet metal forming process such as forming of a rear hinge. Finite element formulation using dynamic explicit time integration scheme and step-wise combined Implicit/Explicit scheme are introduced for numerical analysis of sheet metal forming process. The rigid-plastic finite element method based on membrane elements has long been employed as a useful numerical technique for the analysis of sheet metal forming because of its time effectiveness. The explicit scheme in general use is based on the elastic-plastic modelling of material requiring large computation time. In finite element simulation of sheet metal forming processes, the robustness and stability of computation are important requirements since the computation time and convergency become major points of consideration besides the solution accuracy due to the complexity of geometry and boundary conditions. The implicit scheme employs a more reliable and rigorous scheme in considering the equilibrium at each step of deformation, while in the explicit scheme the problem of convergency is eliminated at the cost of solution accuracy. The explicit approach and the implicit approach have merits and demerits, respectively. In order to combine the merits of these two methods a step-wise combined implicit/explicit scheme has been developed.

• 정보처리학회논문지B
• /
• 제14B권5호
• /
• pp.361-368
• /
• 2007

본 논문은 비디오 영상에서 블록기반 차영상을 이용한 연기검출 방법을 제시한다. 제안된 방법은 배경으로부터 변경된 영역 검출 단계, 배경영상 갱신단계, 검출된 영역이 연기인지를 판단하는 단계의 세 단계로 구성된다. 입력 비디오에서 각 프레임의 블록 평균영상을 계산하였으며, 변화영역을 검출하기 위하여 배경영상의 블록평균영상과 입력영상의 블록평균영상의 차이를 사용한다. 블록기반 차영상을 투영하여 변화된 사각영역을 검출한다. 차영상의 투영을 이용한 배경블록평균영상의 갱신방법을 제안한다. 변화영역의 중심위치 및 YUV 색상의 시간적 특징을 이용하여 연기영역을 판단한다.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.86-98
• /
• 1996

An combined implicit/explicit scheme for the analysis of sheet forming problems has been proposed in this work. In finite element simulation of sheet metal forming processes, the robustness and stability of computation are important requirements since the computation time and convergency become major points of consideration besides the solution accuracy due to the complexity of geometry and boundary conditions. The implicit scheme dmploys a more reliable and rigorous scheme in considering the equilibrium at each step of deformation, while in the explict scheme the problem of convergency is elimented at thecost of solution accuracy. The explicit approach and the implicit approach have merits and demerits, respectively. In order to combine the merits of these two methods a step-wise combined implici/explicit scheme has been developed. In the present work, the rigid-plastic finite element method using bending energy augmented membraneelements(BEAM)(1) is employed for computation. Computations are carried out for some typical sheet forming examples by implicit, combined implicit/explicit schemes including deep drawing of an oil pan, front fender and fuel tank. From the comparison between the methods the advantages and disadvantages of the methods are discussed.

• Bulletin of the Korean Chemical Society
• /
• 제35권11호
• /
• pp.3313-3318
• /
• 2014

The reaction mechanism of Lead ions catalyzing complexation reactions between TIPP and metal ions was investigated by researching the kinetics of the formation of metalloporphyrins by UV/Vis-spectra, and verified by exploring the formation of metalloporphyrins catalyzed by acetic acid. Kinetics studies suggested that the fluctuations of reaction rate indicated the formation of metalloporphyrin was step-wise, including the pre-equilibrium step (the coordination of the pyrrolenine nitrogens to $Mn^+$) and the rate-controlling step (the deprotonation of the pyrrole proton). In the pre-equalization step, a sitting-atop (SAT) structure formed first with the complexation between larger radius of $Pb^{2+}$ and TIPP, changed the activation, then $Pb^{2+}$ left with the smaller radius of metal ions attacking from the back of the porphyrin ring center. In the rate-controlling step, two pyrrole protons dissociated to restore a stable structure. This was verified by adding acetic acid at different reaction times.

• 한국CDE학회논문집
• /
• 제3권1호
• /
• pp.48-56
• /
• 1998

Finite element analysis is very important in the design and analysis of mechanical engineering. The process of FEA encompasses shape modeling, mesh generation, matrix solving and post-processing. Some of these processes can be tightly integrated with the current software architectures and data sharing mode. However, complete integration of all the FEA process itself and the integration to the manufacturing processes is almost impossible in the current practice. The barriers to this problem are inconsistent data format and the enterprise-wise software integration technology. In this research, the information model based on STEP AP209 was chosen for handling finite element analysis data. The international standard for the FEA data can bridge the gap between design, analysis and manufacturing processes. The STEP-based FEA system can be further tightly integrated to the distributed software and database environment using CORBA technology. The prototype FEA system DICESS is implemented to verify the proposed concepts.