• Journal of Korean Society of Steel Construction
• /
• v.27 no.1
• /
• pp.43-52
• /
• 2015

Constructions of buildings downtown are increasing as much as ever with a strong demand. Top-Down Method is suitable for its advantage in minimizing its disturbance to the neighborhood. Pre-founded when applied to CFT Column on-site welded is required for splicing. To complement the welded built-up square composite Column was developed. Top-down process will be pouring concrete in accordance with a step-by-step process. Thus, Pre-founded Column and cover concrete to determine the stress condition. Therefore, Concrete filled steel square tubular columns encased with precast concrete were studied. Five Centrally loaded Columns were tested to investigate the axial load carrying capacity. we analyzed the strength and behavior of CET Column by Loading conditions and concrete strength, thickness of cover concrete through structure experiments.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.12
• /
• pp.594-602
• /
• 1986

This paper proposes an effective algorithm for short-term generation scheduling for the purpose of economic and secure operation of thermal power systems. Especially, in the procedure of solution by Dynamic Programming, Linear Programming is introduced to promote the possibility of optimal solution and the security of power systems, and evaluation of security function is improved by the application of seven step approximation of normal distribution. Several necessary considerations, that is, time dependent start-up and constant down cost of generating units, demand and spinning reserve constraints, minimum up and sown time constraints, the number of possible start-up of a generating unit in a d and the number of generating units which can be started up at the same time at the same bus, are also incoporated to elevate the usability and flexibility of the algorithm. Finally, the effectiveness of the proposed algorithm has been demonstrated by applying to the 6-gen. 21-bus model power system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.5
• /
• pp.325-333
• /
• 2015

Vision based night-time vehicle detection has been an emerging research field in various advanced driver assistance systems(ADAS) and automotive vehicle as well as automatic head-lamp control. In this paper, we propose night-time vehicle detection method based on multi-class support vector machine(SVM) that consists of thresholding, labeling, feature extraction, and multi-class SVM. Vehicle light candidate blobs are extracted by local mean based thresholding following by labeling process. Seven geometric and stochastic features are extracted from each candidate through the feature extraction step. Each candidate blob is classified into vehicle light or not by multi-class SVM. Four different multi-class SVM including one-against-all(OAA), one-against-one(OAO), top-down tree structured and bottom-up tree structured SVM classifiers are implemented and evaluated in terms of vehicle detection performances. Through the simulations tested on road video sequences, we prove that top-down tree structured and bottom-up tree structured SVM have relatively better performances than the others.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.98-101
• /
• 2002

Euglena gracilis abruptly changes its swimming direction after a sudden increase or decrease in incident light intensity, that is, step-up or step-down photophobic responses, resulting in photoavoidance or photoaccumulation, respectively. To identify the photoreceptor molecules for these UV-A/blue-light type photobehaviors, we purified a flavoprotein from isolated putative photosencory organelles (PFBs) of Euglena. The purified flavoprotein, which noncovalently bound flavin adenine dinucleotide (FAD), seemed to be a heterotetramer of alpha- and beta-subunits. Predicted amino acid sequences of each of the subunits were similar to each other and contained two FAD-binding domains each followed by an adenylyl cyclase catalytic domain. The purified flavoprotein actually showed adenylyl cyclase activity, being drastically elevated by blue-light irradiation. Suppression of gene expression of the flavoprotein (Photoactivated Adenylyl Cyclase, PAC) by RNA interference (RNAi) caused loss of the step-up photophobic response, demonstrating that PAC actually mediates photoavoidance of Euglena.

• Journal of Advanced Navigation Technology
• /
• v.13 no.1
• /
• pp.87-96
• /
• 2009

The purpose of this paper is to analyze the power control problem in wireless communications with game theoretic approach. The major contribution of the present paper is that we formulated the problem as a game with a finite number of strategies while most of the previous game theoretic power control literatures modeled with continuous game in which there are infinite number of strategies. It should be noted that the closed-loop power control would be performed in a discrete manner, power up or down from the present level of power with fixed power control step size. We model the current closed-loop power control scheme with the famous Prisoner's dilemma model and show that the power-up strategy is Nash equilibrium. That is, every mobile tries to increase their power and approach to their maximal power. Thus, the outcome of current power control (Nash equilibrium) is inefficient. In order to attain efficient power control for the environment where ICI(Inter-Cell Interference is severe, we developed a new payoff function in which the penalty mechanism is introduced and derived conditions under which power-down becomes Nash equilibrium strategy for all players. Furthermore we examined the trajectory of equilibrium power when the power control game will be played repeatedly.

• Journal of the Korean Institute of Gas
• /
• v.16 no.2
• /
• pp.31-37
• /
• 2012

This paper describes to analyze the ventilation performance of a room air conditioner for indoor comfort control. An experimental apparatus consists of a test room, the room air conditioner, a tracer gas measurement system, a supply fan and a controller. Ventilation performance as a function of human occupancy is evaluated with supply ventilation air using a tracer gas technique of CO2 gas in the test room. The ventilation performance is evaluated in a step-down method based on ASTM Standard E741-83 and is found to increase with increasing supply ventilation rate. The CO2 gas concentration is decayed rapidly without human occupancy. The ventilation performance without human occupancy increases up to 55% and the ventilation performance with one person increases up to 25% at the supply air of 570 lpm comparing with a natural reduction after one hour. A modeling for ventilation performance of a room air conditioner in a test room is presented using experimental datum.

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.114-129
• /
• 2016

Since the release of mid-term domestic GHG goals until 2020, in 2009, some various GHG reduction policies have been proposed to reduce the emission rate about 30% compared to BAU scenario. There are two types of modeling approaches for identifying options required to meet greenhouse gas (GHG) abatement targets and assessing their economic impacts: top-down and bottom-up models. Examples of the bottom-up optimization models include MARKAL, MESSAGE, LEAP, and AIM, all of which are developed based on linear programming (LP) with a few differences in user interface and database utilization. The bottom-up model for electric sector requires demand management, regeneration energy mix, fuel conversation, etc., thus it has a very complex aspect to estimate some various policies. In this paper, we suggest a bottom-up BAU model for electric sector and how we can build it through step-by-step procedures such that includes load region, hydro-dam and pumping storage.

• Journal of Periodontal and Implant Science
• /
• v.41 no.4
• /
• pp.192-200
• /
• 2011

Purpose: The aim of this study is to compare the gene expression profile in mesenchymal stem cells derived from dental tissues and bone marrow for characterization of dental stem cells. Methods: We employed GeneChip analysis to the expression levels of approximately 32,321 kinds of transcripts in 5 samples of bone-marrow-derived mesenchymal stem cells (BMSCs) (n=1), periodontal ligament stem cells (PDLSCs) (n=2), and dental pulp stem cells (DPSCs) (n=2). Each cell was sorted by a FACS Vantage Sorter using immunocytochemical staining of the early mesenchymal stem cell surface marker STRO-1 before the microarray analysis. Results: We identified 379 up-regulated and 133 down-regulated transcripts in BMSCs, 68 up-regulated and 64 down-regulated transcripts in PDLSCs, and 218 up-regulated and 231 down-regulated transcripts in DPSCs. In addition, anatomical structure development and anatomical structure morphogenesis gene ontology (GO) terms were over-represented in all three different mesenchymal stem cells and GO terms related to blood vessels, and neurons were over-represented only in DPSCs. Conclusions: This study demonstrated the genome-wide gene expression patterns of STRO-$1^+$ mesenchymal stem cells derived from dental tissues and bone marrow. The differences among the expression profiles of BMSCs, PDLSCs, and DPSCs were shown, and 999 candidate genes were found to be definitely up- or down-regulated. In addition, GOstat analyses of regulated gene products provided over-represented GO classes. These data provide a first step for discovering molecules key to the characteristics of dental stem cells.

• Physical Therapy Korea
• /
• v.15 no.2
• /
• pp.54-63
• /
• 2008

The purpose of this study was to examine the effect of the hip internal rotation on knee extensor and hip abductor electromyographic (EMG) activity during stair up and stair down mobility. Eighteen healthy subjects were recruited. All subjects performed stair up and down movements on a step of 30cm height while maintaining the hip in neutral (condition 1) and hip in internal rotation (condition 2). Surface EMG activity was recorded from five muscles (gluteus maximus, vastus lateralis (VL), vastus medialis oblique (VMO), posterior gluteus medius (Gmed), and tensor fascia latae (TFU)) and hip internal rotation angle was measured using a three dimensional motion analysis system The time period for stair up and down was normalized using the MatLab 6.5 program, and EMG activity was normalized to the value of maximal voluntary isometric contraction (%MVIC). The EMG activities according to the hip rotation (neutral or internal rotation) during the entire time period of stair up and down in each phase were compared using a paired t-test. During the entire period of stair up, the EMG activities of VL and TFL in condition 2 were significantly greater than in condition 1 (p<.05). During the entire period of stair down, the EMG activities of VL and TFL in condition 2 were significantly greater than in condition 1 (p<.05). However, the EMG activities of the other muscles were not significantly different between the conditions (p>.05). These results suggest that the stair up and down maintaining hip internal rotation was could be a contributing factor on patellar lateral tracking.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.411-420
• /
• 1997

The mechanization efficiency using high ability machines such as tractors or combines in a paddy field rice farm is high. Mechanization in harvesting fruits and vegetables is difficult, because they are easy to be damaged. Therefore, Advanced techniques for careful handling fruits and vegetables are necessary in automation and robotization. An apple harvesting robot must have a recognition device to detect the positioning of fruit, manipulators which function like human arms, and hand to take off the fruit. This study is related to the development of a rotatic hand as the first stage in developing the apple harvesting robot. The results are summarized as follows. 1. It was found that a hand that was eccentric in rotatory motion, was better than a hand of semicircular up-and-down motion in harvesting efficiency. 2. The hand was developed to control changes in grasp forces by using tape-type switch sensor which was attatched to fingers' inside. 3. Initial finger positioning was set up to control accurate harvesting by using a tow step fingering position. 4. This study showed the possibility of apple harvesting using the developed robot hand.