• 한국전산구조공학회논문집
• /
• 제24권3호
• /
• pp.337-342
• /
• 2011

매우 큰 편심하중을 지지하면서 상하로 수직위치를 제어하는 의료용 리프트 칼럼은 수직위치의 정확도를 확보하기 위해 매우 낮은 구조적 변형과 진동은 물론 높은 피로강도가 요구된다. 리프트 칼럼은 일반적으로 3단 슬라이딩 붐구조로 유도전동기로 작동되며, 상하운동에 따라 변동응력을 나타낸다. 본 연구에서는 리프트 칼럼의 상하운동으로 야기되는 변동응력에 따른 피로강도를 수치해석적으로 예측하였다. 한 주기 상하운동에 따른 응력변동은 유한요소해석으로 구하였으며, 피로수명은 Palmgren-miner기법과 재료의 S-N선도를 적용하여 예측하였다. 수치해석의 신뢰성을 확보하기 위하여 리프트 칼럼의 상세형상과 체결부위을 반영한 3차원 FEM모델을 생성하였으며, 칼럼과 패드사이 계면은 접촉조건으로 처리하였다.

• 한국전기전자재료학회논문지
• /
• 제19권7호
• /
• pp.655-661
• /
• 2006

Dielectric and piezoelectric properties of PMN-PZT ceramics with a high mechanical quality factor$(Q_m)$ and a low temperature sintering temperature were investigated as a function of PZN substitution in order to develop multilayer piezoelectric transformer for AC-DC converter. Multilayer piezoelectric transformers were subsequently manufactured using the PMN-PZN-PZT ceramic offering the optimal behavior and then the electrical performance were invetigated. At the sintering temperature of $940^{\circ}C$, density, electromechanical coupling factor$(k_p)$, mechanical qualify factor$(Q_m)$ and dielectric constant$(\varepsilon_r)$ of 8 mol% PZN substituted specimen were $7.73g/cm^3$, 0.524, 1573 and 1455, respectively. The PZN substitution caused a increase in the dielectric constant and the electromechnical coupling factor. The voltage step-up ratio of multilayer piezoelectric transformer showed the maximum value at near the resonant frequency of 76.55 kHz and increased according to the increase of load resistance. The multilayer piezoelectric transformer with the output impedance coincided with the load resistance showed the temperature increase of less than $20^{\circ}C$ at the output power of 10 W. Based on the results, the manufactured multilayer transformer using the low temperature sintered PMN-PZN-PZT ceramics can be stably driven for both step-up and down transformers.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1475-1480
• /
• 2007

Numerical analysis has been conducted to simulate pedestrian flow in the model of two-storied subway station. Because almost all the subway stations are two or three storied structure, simulations are conducted for the passengers those who get off the train and pass the wicket. Passenger flow analysis is very important factor to design the station and also to manage the operation of subway system. In the subway station, pedestrians move to the horizontal directions as well as vertical ones. Therefore, to consider the movement of pedestrians is necessary for the guarantee of safety and conveniency. As the up and down floors are connected with step, escalator and elevator, the entire movements in the multi-storied station should be simulated as like a 3-dimensional flow. Numerical schemes for the directional sweeping are developed to prevent the dependency on physical structure of station and to determine primary direction and secondary one. By using the developed program, we compared the simulation results of the effects of the location and size of exit and elapsed time.

• Journal of Electrical Engineering and Technology
• /
• 제5권3호
• /
• pp.477-483
• /
• 2010

This paper is studied on a novel buck-boost isolated converter for high efficiency and high power factor. The switching devices in the proposed converter are operated by soft switching technique using a new quasi-resonant circuit, and are driven with discontinuous conduction mode (DCM) according to pulse width modulation (PWM). The quasi-resonant circuit makes use of a step up-down inductor and a loss-less snubber capacitor. The proposed converter with DCM also simplifies the requirement of control circuit and reduces a number of control components. The input ac current waveform in the proposed converter becomes a quasi sinusoidal waveform in proportion to the magnitude of input ac voltage under constant switching frequency. As a result, it is obtained by the proposed converter that the switching power losses are low, the efficiency of the converter is high, and the input power factor is nearly unity. The validity of analytical results is confirmed by some simulation results on computer and experimental results.

• Journal of Power Electronics
• /
• 제9권6호
• /
• pp.835-844
• /
• 2009

In this paper a new buck-boost type DC-DC converter is presented. Its voltage gain is positive, all active elements operate under soft-switching condition independent of loading, magnetic isolation and self output short-circuit protection exist, and very fast dynamic operation is achievable by a simple bang-bang controller. This converter also exhibits appropriate PFC characteristics since its input current is inherently proportional to the source voltage. When the voltage source is off-line, it is sufficient to add an inductor after the rectifier, then near unity power factor is achievable. All essential guidelines to design the converter as a DC-DC and a PFC regulator are presented. Simulation and experimental results verify the developed theoretical analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1032-1034
• /
• 2001

As well known, a solar cell has an optimal operating point to be able to get the maximum power $P_{max}$. So, many $P_{max}$ tracking controllers using the line voltage of a solar cell have been popularly used. But it may vary depending on the miss match between the solar cell output and the load. In this paper, we investigate the possibilities of $P_{max}$ control using the current tracking controller and the output voltage and the output current instead of the solar cell output power. And we also examine about the optimal power converter using ZVCS step up and down chopper circuit to operate the solar cell at an optimal voltage using these variables. And then, we show some experimental results to confirm the successful operation.

• 소음진동
• /
• 제10권4호
• /
• pp.692-701
• /
• 2000

Escalators are widely used for mass transportation in public places. In recent years, strict requirements on the comfort and reliability for the public transportation have drawn a great attention to vibration in escalators. This paper presents a dynamic model for escalators to be used for the analysis and design of low vibration escalators. The dynamic model is developed so as to reflect the physical observation on peculiar characteristics in escalators such as the difference between up-moving and down-moving, and the abnormal vibration affected by the load applied. For validation of the dynamic model developed, experimental results are compared with numerical results from the model. The numerical study shows that the developed model may be useful for the analysis and design of escalator systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.230-232
• /
• 2001

The camera system we researched has two stepping motors for the pan and tilt operation, and the human face tracking algorithm. Recently, this kind of the camera is used in PC communication, telecommunication vision meeting and tele-lecture. This paper discusses the smooth speed control method of this camera when the face is moved to up, down, left and right direction. We used a mean shift algorithm for the face-tracking, proposed the speed control algorithm using a fuzzy logic and certified this characteristics with the experiment.

• Clinical and Experimental Pediatrics
• /
• 제53권9호
• /
• pp.830-833
• /
• 2010

Crohn's disease is characterized by chronic inflammation involving any portion of the gastrointestinal tract. Treating Crohn's disease is a major challenge for clinicians, as no curative therapy currently exists. Pediatric Crohn's disease is characterized by frequent relapses, a wide extent of disease, a high prevalence of extraintestinal manifestations, and a severe clinical course. The classic therapeutic approach is known as the 'step-up' strategy, and follows a progressive course of treatment intensification as disease severity increases. Although this approach is usually effective for symptom control, many patients become either resistant to or dependent on corticosteroids. The efficacy of infliximab suggests that, rather than a progressive course of treatment, early intense induction may reduce complications associated with conventional treatment and improve quality of life. Intensive early therapy with infliximab is known as the 'top-down' strategy. Such therapy offers the potential for altering the natural history of Crohn's disease, and is changing treatment paradigms. However, the relatively new concept of an early aggressive or 'top-down' treatment approach is not yet widely accepted, especially in pediatric patients. The results of our current study demonstrate that early and intensive treatment of pediatric Crohn's disease patients with infliximab, at initial diagnosis, was more effective for maintaining remission and reducing flares.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.260-267
• /
• 2015

An LCL-type isolated dc-dc converter is analyzed, using ac approximation. Analyses to express characteristics on the proposed converter are derived under steady and ideal elements conditions in this paper. The two operating modes can be identified from the analysis results representing different device conduction sequences. This converter is capable of achieving required output voltage(step up or down) operations with inductance ratio while operated at fixed frequency with constant duty ratio-50%. Experimental results show that the designed converter based on Q has zero voltage switching and constant output voltage at different load variations to verify the analysis.