• 한국세라믹학회지
• /
• 제48권4호
• /
• pp.263-268
• /
• 2011

ZnO hexagonal rods grown in aqueous solution can be changed into a tubular shape by two-step aging in the course of the growing process. In the first step, hexagonal ZnO rods is grown by aging at $90^{\circ}C$ under a highly supersaturated aqueous solution giving rise to a fast precipitation rate. Meanwhile, during the second step aging at $60^{\circ}C$ in the same aqueous solution, the hexagonal polar face (001) having higher surface energy than (010) side planes dissolves to minimize surface energy. Hence the flat (001) face changes to a craterlike face and the hexagonal rod length of ZnO decreases at an initial-stage of this step aging. The formation of the (101) wedge-type faces is ascribed to the resultant of competitive reactions between the dissolution of polar face minimizing the surface energy which is a dominant reaction at the initial stage and the precipitation reaction dissipating supersaturation. At a later stage of the second-step the reaction rates of these two processes in the aqueous solution become similar and the overall reaction is terminated.

• The Korean Journal of Physiology
• /
• 제21권2호
• /
• pp.305-311
• /
• 1987

To evaluate training effect, the step exercise was loaded to three mem for nine weeks. Step score, cardiopulmonary functions and blood constituents were measured before, during and after the test exercise (50 cm-step exercise and treadmill running), and were compared with the pre-tranining values. The results were as follows: 1) By the training, Harvard step score increased remarkably, expecially in the early stage of training. 2) The post-training values of maximal oxygen uptake increased very significantly and it seemed to be due to increases of stroke volume and tissue oxygen extraction. 3) After the training, the degree of increase in expired volume was small during the treadmill exercise. 4) By the training, increasing rate of respiratory quotient lessened during the exercise and it was considered to be caused by the decreases of carbohydrate consumption and anaerobic metabolism. 5) The blood cholesterol concentrations were harldy changed with this degree of training. 6) The blood lactate level decreased during the recovery periods and the values of the recovery 0 and 5 minutes decreased remarkably, in comparison with the pre-trained values. The above results suggest that the 9 week-training of the step exercise brings about the enhancement of circulatory functions and tissue oxygen utilization, and changes of food-stuffs used during the exercise.

• 한국정보통신학회논문지
• /
• 제7권3호
• /
• pp.384-389
• /
• 2003

새로운 two-step SOVA 복호기 구조가 제안된다. Trace-back단의 survivor memory에 dual-port RAM 개념이 적용되어, 기존 two-step SOVA 방식에 비해서 복호 지연의 현격한 감소가 가능해진다. Path metric 차이의 절대값이 ACS단 내부에서 계산됨으로써, 기존 two-step SOVA 방식에 비해 시스템의 복잡성이 크게 줄어든다. 제안된 SOVA 복호기 구조는 verilog HDL로 기술되어 동작 시뮬레이션을 거쳐 구조의 타당성이 검증되었으며, FPGA로 구현되었다. 구현된 SOVA복호기는 종래의 비터비 복호기에 가까운 데이터 처리율을 보여주었으며, 구현에 사용된 FPGA 소자 자원은 종래의 비터비 복호기의 약 1.5배 정도이다.

• 한국정보처리학회논문지
• /
• 제7권5호
• /
• pp.1587-1598
• /
• 2000

For the object-based video compression at very low bit rate, vieo segmentation is an essential part. In this paper, we propose a temporal video segmentation algorithms for motion pictures which is based on blocks. The algorithm is composed of three steps: (1) the change-detection, (2) the block merging, and (3) the block segmentation. The first step separates the change-detected region from background. Here, a new method for removing the uncovered region without motion estimation is presented. The second step, which is further divided into three substeps, estimates motions for the change-detected region and merges blocks with similar motions. The merging conditions for each substep as criteria are also given. The final step, the block segmentation, segments the boundary block that is excluded from the second step on a pixel basis. After describing our algorithm in detail, several experimental results along the processing order are shown step by step. The results demonstrate that the proposed algorithm removes the uncovered region effectively and produced objects that are segmented well.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권9호
• /
• pp.3458-3481
• /
• 2021

Existing methods for blind identification of linear block codes without a candidate set are mainly built on the Gauss elimination process. However, the fault tolerance will fall short when the intercepted bit error rate (BER) is too high. To address this issue, we apply the reverse algebra approach and propose a novel "two-step-screening" algorithm by solving the linear error equations on the binary Galois field, or GF(2). In the first step, a recursive matrix partition is implemented to solve the system linear error equations where the coefficient matrix is constructed by the full codewords which come from the intercepted noisy bitstream. This process is repeated to derive all those possible parity-checks. In the second step, a check matrix constructed by the intercepted codewords is applied to find the correct parity-checks out of all possible parity-checks solutions. This novel "two-step-screening" algorithm can be used in different codes like Hamming codes, BCH codes, LDPC codes, and quasi-cyclic LDPC codes. The simulation results have shown that it can highly improve the fault tolerance ability compared to the existing Gauss elimination process-based algorithms.

• 대한전자공학회논문지
• /
• 제24권1호
• /
• pp.91-96
• /
• 1987

Plasma etching can obtain less damaged etch surface than reactive ion etching. This study was performed to get anisotropic etching characteristics of Si using two step etching technique with C2CIF5 and SF6 gas mixture. The results show that the etch rate and aspect ratio of silicon was increased with increment of SF6 contents. The bulging phenomenon on trench side wall in the plasma one-step etching technique was eliminated by the two step etching technique. The anisotropy was decreased from 12(at 120m Torr) to 2.2(at 400m Torr) with increasing the chamber pressure. At the low rf power (350 watts) anisotrpy of silicon was obtained 7 lower than that of high rf power (650 watts. A:~9). In Summary we obtained anisotropic etching profiles of silicon with e 6\ulcornerm depth by using the plasma two-step etching technique.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권4호
• /
• pp.102-106
• /
• 2000

We report scanning force microscope (SFM) observations of enhanced calcite dissolution in aqueous solution due to mechanical stimulation induced by the SFM tip. Images and mechanical treatment were performed in saturated ($\geq$ 60 ${\mu}{\textrm}{m}$) CaCO$_3$ solution adjusted to pH~9. Small area scans of monolayer steps significantly increased the step velocity in the scanned area (in the direction corresponding to dissolution) when the applied contact force is above about 160 nN fer the tips employed. The step velocity could be increased at least an order of magnitude by scanning at even higher contact forces (e.g.,270nN). This enhancement is a function of step orientation relative to the calcite lattice. Indentations near preexisting steps also locally enhance the step velocity. We present evidence that the higher dissolution rates are caused by stress-induced increases in the rate of double-kink nucleation.

• 전자공학회논문지A
• /
• 제30A권1호
• /
• pp.16-22
• /
• 1993

A via-hole process for reproducible and reliable GaAs MMIC fabrication is described. The via-hole etching process consists of two step dry etching. During the first etching step a BC $I_{3}$/C $I_{2}$/Ar gas mixure is used to achieve high etch rate and small lateral etching. In the second etching step. CC $L_{2}$ $F_{2}$ gas is used to achieve selective etching of the GaAs substrate with respect to the front side metal layer. Via holes are formed from the backside of a 100$\mu$m thick GaAs substrate that has been evaporated initially with 500.angs. thick chromium and subsequently a 2000.angs. thick gold layer. The fabricated via holes are electroplated with gold (~20$\mu$m thick) to form via connections. The results show that established via-hole process is satisfactory for GaAs MMIC fabrication.

• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.138-145
• /
• 1997

This paper proposes an adaptive algorithm for the quantization step size control of MPEG-2, using the information obtained from the previously encoded picture. Before quantizing the DCT coefficients, the properties of reconstruction error of each macro block (MB) is predicted from the previous frame. For the prediction of the error of current MB, a block with the size of MB in the previous frame are chosen by use of the motion vector. Since the original and reconstructed images of the previous frame are available in the encoder, we can calculate the reconstruction error of this block. This error is considered as the expected error of the current MB if it is quantized with the same step size and bit rate. Comparing the error of the MB with the average of overall MBs, if it is larger than the average, small step size is given for this MB, and vice versa. As a result, the error distribution of the MB is more concentrated to the average, giving low variance and improved image quality. Especially for the low bit application, the proposed algorithm gives much smaller error variance and higher PSNR compared to TM5 (test model 5).

• Bulletin of the Korean Chemical Society
• /
• 제10권1호
• /
• pp.102-103
• /
• 1989

Four coordinated rhodium(Ⅰ) complexes, Rh($ClO_4$)(CO)$(PPh_3)_2$ and [$Rh(CO)(PPh_3)_3$]$ClO_4$(2) catalyze the iosmerization of allylic alcohols to the corresponding carbonyl compounds at room temperature under nitrogen. The isomerization is faster with 2 than with 1, which is understood in terms of relative ease of the last step of the catalytic cycle, the reductive elimination of enol. Relative rates of the isomerization with 1 and 2 for different allylic alcohols are also explained by the relative ease of the enol elimination step in part. The first step of the catalytic cycle, the complex formation of the allylic alcohol through the ${\pi}-system$ of the olefinic group of the allylic alcohol and the following step, formation of hydridoallyl complex also seem to affect the overall rate of the isomerization.