• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.528-532
• /
• 2006

In the aerospace industry, Cold expansion has been used the most important method that is retarded of crack initiation from fastener hole surface. Cold expansion method(CEM) is that a oversized tapered mandrel goes through the hole in order to develop a compressive residual stress as the passing of the mandrel around the hole. Therefore, because of characteristic of mandrel inserting, Residual Stress Distributions (RSD) are differently generated form Entry, Mid and Exit position of the plate. Also, it is respected that RSD are changed as distances between holes. In this paper, It is performed a FE analysis of RSD by CEM and it is respectively shown RSD in the Entry, Mid and Exit position. It is compared residual stress results form the cold expansion in these two cases: the concurrent CEM and the sequential CEM. From this research, it has been found that compressive residual stress of Entry position is lower than other positions. Also, the concurrent CE of adjacent holes leads to much higher compressive residual stress than the sequential CE. In addition, in the sequential CE case, a compressive RSD of 1 step's hole around is lower than compressive RSD of 2 step's hole around.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.84-89
• /
• 2004

There is a growing interest to replace the commercial steels with non-heat treated steels, which does not involve the spheroidization and quenching-tempering treatment. However, Non-heat treated steels should satisfy high strength and good formability without performing heat treatment. Therefore, it is important to investigate optimum materials showing a good combination of strength and formability after the drawing process. In this study, Dual-Phase Steels were studied as candidate materials for non-heat treated steels, which have different martensite morphologies and volume fractions obtained through heat-treatment of intercritical quenching (IcQ), intermediate quenching (ImQ) and step quenching (SQ). The mechanical properties of DP steels were measured by tension and compression tests. Also, the cold formability of three DP steels which have similar tensile strength value was investigated by estimating the deformation resistance and the forming limit. The deformation resistance which is important factor in determining die life was estimated by calculating the deformation energy. And the forming limit was estimated by measuring the critical strain revealing crack initiation at the notch tip of the specimens.

• Pediatric Infection and Vaccine
• /
• v.18 no.1
• /
• pp.15-22
• /
• 2011

Invasive Candida infections (ICI) have become the third most common cause of late-onset infection among premature infants in the neonatal intensive care unit (NICU). Risk factors include birth weight less than 1,000 g, exposure to more than two antimicrobials, third generation cephalosporin exposure, parenteral nutrition including lipid emulsion, central venous catheter, and abdominal surgery. Candida colonization of the skin and gastrointestinal tract is an important first step in the pathogenesis of invasive disease. Strict infection control measures against the infection should be done in the NICU. The following practices are likely to contribute to reducing the rate of ICI: (1) restriction of broad-spectrum antibiotics, antacids and steroid; (2) introduction of early feeding and promoting breast milk. Fluconazole prophylaxis may be an effective control measure to prevent Candida colonization and infections in individual units with high incidence of fungal infection. In addition, there is a need of further data including the development of resistant strains and the effect on long-term neurodevelopmental outcomes of infants exposed to drugs before the initiation of routine application of antifungal prophylaxis in the NICU.

• Korean Journal of Adult Nursing
• /
• v.20 no.2
• /
• pp.219-230
• /
• 2008

Purpose: The purpose of this study was to discover the recovery process of those having had myocardial infarction. Methods: 15 participants with myocardial infarction were recruited by theoretical sampling methods. The data were retrieved through in depth interview, participant observation, and medical records of the patients. Collected data were analyzed through grounded theory approach of Strauss and Corbin(1998). Results: 63 concepts, 27 subcategories, and 11 categories were deduced from the open coding process. The recovery process of myocardial infarction showed to be a process of 'Controling healthy track', and chronological recovery process was a four-step process of recognizing disruption of healthy track, making efforts for controlling the disrupted healthy track, reconstructing the new healthy track, and adapting to the new healthy track phase. 'Controling healthy track' had three types of self-initiation, contention of reality, and fateful acceptance. Conclusion: The results provided basic information for nursing intervention strategies depending on 'Controling healthy track' process by each phase and different types.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.180-180
• /
• 1998

The marine sponge Petrosia sp. is known for various bioactive compounds including the recently reported polyacetylenic alcohols. In our continuous survey of bioactive compounds from the Petrosia sp. collected from Korean waters, a cyclopentanepentol which rarely occurs in natural products has been isolated. It was found to inhibit DNA replication at the initiation step.

• Journal of Korea Foundry Society
• /
• v.11 no.5
• /
• pp.406-413
• /
• 1991

Ductile cast iron(DCI) with a multi-phase(ferrite-bainite-martensite) structures was produced by various special heat treatment. Intercritical heat treatment(I. C.), intermediate heat treatment(I. M.) and step quenching(S. Q.) were used to strengthen and toughen the fracture initiation sites such as graphite-marix interfaces and eutectic cell boundaries in DCI. The purpose of this study was to investigate of DCI by the special heat treatment. (I. C., I. M., and S. Q.) At a result, bainite nucleation rate at higher temperature was higher than that of at lower temperature, and shapes of bainite and martensite became bar /spheroidal type with increase of isothermal transformation time.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.149-158
• /
• 1999

The modern trends of optical storage devices can be characterized by high density in information recording, and high bandwidth in data input/output processing rate. These make servo engineers to face with a new barrier on control system design in much more difficult way. The first step to attack this barrier will be through a systematic modeling for the dynamic characteristics of optical storage drive. in this paper, an analytical dynamic model for an optical storage drive based on FEM is drived, and compared with experimental results. Through this comparison, a practical dynamic model on the focusing and tracking motion of optical storage drive is proposed for the initiation of real control system design problem.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.2
• /
• pp.81-84
• /
• 1988

The CO oxidation was performed on $H_2$-reduced NiO-${\alpha}-Fe_2O_3$ in the temperature range 150-$250^{\circ}C$. The kinetic study and the conductivity measurements indicate the oxidation reaction follows Langmuir-Rideal type process that is uncommon in heterogeneous catalyst$^1$. No active site is found on the catalyst surface for CO adsorption, but an oxygen vacancy adsorbs an oxygen, and this step is rate initiation. The partial orders are half for $O_2$ and first for CO, respectively. Apparent activation energy for over-all reaction is 9.05 kcal/mol.

• Korean Journal of Optics and Photonics
• /
• v.2 no.4
• /
• pp.227-232
• /
• 1991

The possibility for the high intensity and energy possessing a short pulse in the HF chemical laser system which contained fluoride molecules (RF) was demonstrated theoretically through the numerical model simulation. The calculation was accomplished by assuming that the thermal branched chain mechanism of RF was occurred in the initiation step of $H_2+F_2$ chain reaction. Variations of the major chemicals and the temperature in the system were calculated as a function of time. An analysis was also performed to evaluate output pulse profile through parametric studies.

• Korean Journal of Exercise Nutrition
• /
• v.15 no.4
• /
• pp.153-161
• /
• 2011

The maintenance of skeletal muscle mass is very important for the prevention of life style-related diseases and the improvement of quality of life. It is well-known that resistance exercise and nutrition (especially amino acids) are the most effective interventions for maintaining skeletal muscle mass. It has been reported that many molecules are involved in the regulation of protein synthesis in response to resistance exercise and nutrition. Understanding the molecular mechanisms regulating muscle protein synthesis is crucial for the development of appropriate interventions. The role of intracellular signaling pathways through the mammalian target of rapamycin (mTOR), a serine/threonine protein kinase in the regulation of muscle protein synthesis, has been extensively investigated for these years. Control of protein synthesis by mTOR is mediated through phosphorylation of downstream targets that modulate translation initiation and elongation step. In contrast, upstream mediators regulating mTOR and protein synthesis in response to resistance exercise and amino acid still needed to be determined. In this brief review, we discuss the current progress of intracellular mechanisms for exercise- and amino acid-induced activation of mTOR pathways and protein synthesis in skeletal muscle.