• 한국전자파학회논문지
• /
• 제19권9호
• /
• pp.1058-1064
• /
• 2008

본 논문에서는 RF(Radio Frequency) 중계기에서 그룹화 CMA(Constant Modulus Algorithm)와 LMS(Least Mean Square) 알고리즘을 이용하여 적응 필터를 적용시킨 새로운 혼합 간섭 제거기를 제안한다. 송신 안테나에서 수신안테나로 궤환되는 신호는 수신 시스템의 성능을 저하시킨다. 제안한 간섭 제거기는 그룹화 CMA 알고리즘 간섭 제거 기법을 적용시키기 때문에 기존 구조보다 나은 채널 적응 성능과 낮은 MSE(Mean Square Error)을 가진다. 이 구조는 기존 비선형 간섭 제거기에 비해 같은 MSE(Mean Square Error)에 대한 반복수와 하드웨어 복잡도를 줄여준다. 즉, 제안한 알고리즘은 LMS 알고리즘에 비해 평균 자승 에러가 적응 상수에 따라 2.5 dB 또는 4 dB 정도 낮은 값을 보였다. 또한, VSS(Variable Step Size)-LMS 알고리즘에 비해 수렴 속도가 빠르고, 비슷한 평균 자승 에러를 가진다.

• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.29-35
• /
• 2008

본 논문에서는 부하전류의 급격한 변화에도 안정적인 출력진압을 얻기 위하여 강압쵸퍼의 전압제어 기를 개선하는 방법으로 부하전류 전향보상기를 제시하였다. 제시된 부하전류 전향보상기의 특성을 확인하기 위해 메이슨(Mason)의 이득공식을 이용하여 기존의 전압제어기가 포함된 전체 시스템의 전달함수와 부하전류 전향보상기가 추가된 전체 시스템의 전달함수를 각각 근궤적선도와 보드선도 상에서 비교하였다. 그 결과 시스템의 극점이 개선되고, 공진주파수에서의 첨두값의 크기 및 절점주파수의 위상여유가 양호한 것을 확인하였다. 따라서, 제시된 제어기법이 강압쵸퍼의 정상상태 및 동특성을 향상시키고 출력에 나타나는 외란에 의한 영향을 감소시킨 것을 확인할 수 있었다.

• 전력전자학회논문지
• /
• 제14권5호
• /
• pp.343-354
• /
• 2009

본 논문에서는 집적 가능한 전력변환기 제작을 위하여 자화 소자가 없는 전력용 직류-직류 변환기를 제안하였다. 자화 소자가 없는 대신, 압전 트랜스듀서의 유도성 임피던스 구간을 사용함으로써 에너지 저장 및 소프트 스위칭을 위한 공진파형을 구현하였다. 압전소자는 권선이 없고 전극을 사용하여 전력을 전달하므로, 반도체 공정을 통한 대량생산이 가능한 장점이 있다. 본 논문에서는 압전 트랜스듀서를 적용가능한 승압형 공진형 직류-직류 변환 회로를 제안하고, 동작모드 및 주파수 제어 특성을 분석하였다. 또한, 단일 컨버터를 확장한 다중 직렬형 토폴로지를 살펴보고, 동일하게 주파수 제어 특성을 분석하였다. 분석 결과를 검증하기 위하여 10W 출력 직류-직류 전력변환기 하드웨어를 제작하였다. 또한 확장형 다중 직렬 컨버터 하드웨어를 제작하여 검증하였다. 단일 컨버터와 동일하게 주파수 제어 특성을 보였으며, 전력변환기로 매우 우수한 효율 성능을 보임을 알 수 있었다.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.451-454
• /
• 2011

In this paper, a wideband clock generator using novel Automatic frequency calibration(AFC) scheme is proposed. Wideband clock generator using AFC has the advantage of small VCO gain and wide frequency band. The conventional AFC compares whether the feedback frequency is faster or slower then the reference frequency. However, the proposed AFC can detect frequency difference between reference frequency with feedback frequency. So it can be reduced an operation time than conventional methods AFC. Conventional AFC goes to the initial code if the frequency step changed. This AFC, on the other hand, can a prior state code so it can approach a fast operation. In simulation results, the proposed clock generator is designed for DisplayPort using the CMOS ring-VCO. The VCO tuning range is 350MHz, and a VCO frequency is 270MHz. The lock time of clock generator is less then 3us at input reference frequency, 67.5MHz. The phase noise is -109dBC/Hz at 1MHz offset from the center frequency. and power consumption is 10.1mW at 1.8V supply and layout area is $0.384mm^2$.

• Membrane and Water Treatment
• /
• 제1권1호
• /
• pp.13-37
• /
• 2010

The performance of an electrodialyzer for concentrating seawater is predicted by means of a computer simulation, which includes the following five steps; Step 1 mass transport; Step 2 current density distribution; Step 3 cell voltage; Step 4 NaCl concentration in a concentrated solution and energy consumption; Step 5 limiting current density. The program is developed on the basis of the following assumption; (1) Solution leakage and electric current leakage in an electrodialyzer are negligible. (2) Direct current electric resistance of a membrane includes the electric resistance of a boundary layer formed on the desalting surface of the membrane due to concentration polarization. (3) Frequency distribution of solution velocity ratio in desalting cells is equated by the normal distribution. (4) Current density i at x distant from the inlets of desalting cells is approximated by the quadratic equation. (5) Voltage difference between the electrodes at the entrance of desalting cells is equal to the value at the exits. (6) Limiting current density of an electrodialyzer is defined as average current density applied to an electrodialyzer when current density reaches the limit of an ion exchange membrane at the outlet of a desalting cell in which linear velocity and electrolyte concentration are the least. (7) Concentrated solutions are extracted from concentrating cells to the outside of the process. The validity of the computer simulation model is demonstrated by comparing the computed results with the performance of electrodialyzers operating in salt-manufacturing plants. The model makes it possible to discuss optimum specifications and operating conditions of a practical-scale electrodialyzer.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.130-133
• /
• 2005

This paper presents the efficient method to detect the defective detectors of the SWIR band of SPOT 4. The key of this method are to flatten the baseline of the data using high pass band filter instead of differentiation. This method is made up six steps. First step is to apply image enhancement techniques to enhance the lines imaged by defective detector and improve the quality of an image. Second step is processed by summing the enhanced image in line direction. These summed data have the peaks that represent the defective detectors and the curved baseline characterized by the reflectivity of Earth surface. In order to exactly detect these peaks, third step is to flatten the curved baseline using high pass filtering in the frequency domain. In fourth step, the data with flat baseline is normalized to have zero mean and unity standard deviation. In fifth step, the defective detectors are detected using $99.9\%$ confidence interval. Finally, after removing the detected ones in summed data, the steps from third to five are iterated. Three SPOT 4 images, which have different reflectivity of Earth surface and different sensor, were used to validate this method. The overall accuracy of detection for three images was $97.9\%$. This result shows that this method can detect efficiently the lines made by defective detectors.

• Steel and Composite Structures
• /
• 제25권4호
• /
• pp.485-496
• /
• 2017

In this paper, damage detection has been introduced as an optimization problem and a two-step method has been proposed that can detect the location and severity of damage in truss structures precisely and reduce the volume of computations considerably. In the first step, using the residual force vector concept, the suspected damaged members are detected which will result in a reduction in the number of variables and hence a decrease in the search space dimensions. In the second step, the precise location and severity of damage in the members are identified using the genetic algorithm and the results of the first step. Considering the reduced search space, the algorithm can find the optimal points (i.e. the solution for the damage detection problem) with less computation cost. In this step, the Efficient Correlation Based Index (ECBI), that considers the structure's first few frequencies in both damaged and healthy states, is used as the objective function and some examples have been provided to check the efficiency of the proposed method; results have shown that the method is innovatively capable of detecting damage in truss structures.

• 대한전자공학회논문지
• /
• 제25권6호
• /
• pp.663-671
• /
• 1988

In this paper, in order to reduce the blocking effect of block coded images, we propose the method considering the lowpass and bandpass components of Granrath's human visual model. This method consists of two-stage enhancement procedure. The first step is lowpass filtering which smooths out the blocking effect, and the second step is a high frequency enhancement procedure to increase the contrast decreased by the lowpass filtering in the first step. In the first step, the one-dimensional Gaussian filter which aligthns parallel to the edge direction is considered to preserve the edge in the block and the two-dimensional Gaussian filter is used to smooth out the blocking effect near the block boundaries. In the second step, the lowpass and bandpass components of the Granrath's model are considered to increase contrast in a restored image. The performance comparison of the proposed method and the existing mehtods is made by a computer simulation with several block coded images. We can see that the enhancement in the subjective quality of images of the proposed method is more significant than the enhancement in the subjective quality of images of the proposed method is more significant than the existing methods, though the proposed method does not show better performance on the PSNR gain, the poor measure of picture quality for block coded images.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.340-343
• /
• 2003

This paper presents characteristics of piezo transformer for AC-DC converter. This transformer uses transverse vibration mode and the origin of the structure was the ring dot type transformer. Because, the ring dot type transformers produce only step-up phenomenon, we made a multi-layered ring dot structure for a step-down output. The characteristics of the transformer were simulated by using the ANSYS. And frequency and voltage were measured by changing the load resistance and current. Frequencies that have the maximum output voltage and current were gradually increased, when the resistance were increased. Output voltage and current show a stable linearity according to the input voltage. The maximum output power was expected greater than 20 [W]. So, we expect that this type of multi-layered step-down ring dot transformer can be adopted for a small AC adapters.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.50-58
• /
• 2003

We have developed a locally variable time-step scheme matching with discontinuous grids in the flute-difference method for the efficient simulation of seismic wave propagation. The first-order velocity-stress formulations are used to obtain the spatial derivatives using finite-difference operators on a staggered grid. A three-times coarser grid in the high-velocity region compared with the grid in the low-velocity region is used to avoid spatial oversampling. Temporal steps corresponding to the spatial sampling ratio between both regions are determined based on proper stability criteria. The wavefield in the margin of the region with smaller time-step are linearly interpolated in time using the values calculated in the region with larger one. The accuracy of the proposed scheme is tested through comparisons with analytic solutions and conventional finite-difference scheme with constant grid spacing and time step. The use of the locally variable time-step scheme with discontinuous grids results in remarkable saving of the computation time and memory requirement with dependency of the efficiency on the simulation model. This implies that ground motion for a realistic velocity structures including near-surface sediments can be modeled to high frequency (several Hz) without requiring severe computer memory