• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.294-301
• /
• 1987

This experiment was carried out to investigate the occurrence of tiller and its proportion to grain yield under 5 different plant densities. Plant density 5 x 5cm was more favorable for increasing the number of spikes per unit area, where leads to improve grain yield. Effective tillers showed only main stem, M$_1$-axil and M$_2$-axil, indication more effective tillers in M$_1$ rather than main stem. Every tillers held at least 6 leaves to bear spikes, indicating that main stem has 12 -13 leaves. Leaves attached on main stem M$\sub$0/ and M$_1$ were very important as main source of photosynthesis, especially under more compart plant densities while leaves of M$_1$ occupied 66.8% in a plant. The proportion of grain yield of each tiller to total grain yield per plant was high in main stem under conpact plant density, in M$_1$ stems under less compact plant density, and in M$_2$ -stems under wide plant density, indicating same result on multiple regression analysis.

• Nuclear Engineering and Technology
• /
• v.35 no.2
• /
• pp.133-143
• /
• 2003

Stem-stem nut coefficient of friction(COF) in motor-operated gate/globe valves is one of the important factors which determine the performance of the valve/actuators. The COF is affected greatly by the type and condition of the stem-stem nut lubricants, environmental parameters, surface condition of the stem/stem-nuts, and the number of strokes after the lubrication. In this paper, the measured data of the COFs at stem threads of some safety-related motor-operated gate/globe valves in domestic nuclear power plants are presented. In addition, the performance of the lubricants is evaluated by comparing the COFs among those valves. The results show that the measured COF at torque switch trip are higher than the unwedging COF and conservatively applicable to the unwedging COF. It is also shown that the lubricating performance based on the measured COFs varies with the lubricants.

• Journal of Acupuncture Research
• /
• v.23 no.5
• /
• pp.199-206
• /
• 2006

Objectives : The aim of this study was to investigate the effect of various electroacupuncture stimulation on neuronal nitric oxide synthase(nNOS) in cerebral cortex, brain stem, cerebellum of spontaneously hypertensive rats. Methods : We evaluated the changes of nNOS-positive neurons using a immunohistochemical method. The staining intensity of nNOS positive neurons was assessed in a quantitative fashion using a microdensitometrical method based on optical density by means of an image analyzer. Results : The average optical density of nNOS-positive neurons of 100 Hz (bipolar square wave 0.2 ms duration and 100 Hz frequency) electroacupuncture treatment group significantly decreased in most cortical areas comparison between the manual acupuncture and 2 Hz (bipolar square wave 0.2 ms duration and 2 Hz frequency) electroacupuncture groups. In the brain stem, the optical density of nNOS-positive neuron at superficial gray layer of the superior colliculus area, dorsolateral periaqueductal gray area and paralemniscal nucleus were same as cerebral cortex. Conclusion : We conclude that the morphological evidence for nNOS-positive neurons may be have regional change in cerebral cortex brain stem and cerebellum according to various electroacupuncture stimulations.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.441-445
• /
• 2005

Researches on estimating national-scaled forest biomass are being carried out to quantify the carbon stock of forests with the Kyoto Protocol. In general, estimates of national-scaled forest biomass are based on forest inventory data which provides estimates of forest area, stem volume, and growth of stem by age classes. Estimates of forest biomass are, however, obtained by converting stem volumes to dry weight with stem density and thereafter to whole tree biomass with biomass expansion factors (ratios of whole tree dry weight to stem dry weight). Pinus densiflora is widely distributed and one of the most economically important timber species in Korea. The species are largely grouped into two ecotypes of Geumgang and Jungbu. Stems of Geumgang type trees are straight and high compared to those of Jungbu type trees. The objective of this study was to determine and compare stem density and biomass expansion factors fore two ecotypes of Pinus densiflora according to stand age. Stem density of both ecotypes of Pinus densora increased and biomass expansion factors of them decreased with increasing tree age. In he same age class, stem density and biomass expansion factor of Geungang type Pinus densiflora were lower than those of Jungbu type Pinus densiflora. There were statistically significant differences in stem density and biomass expansion factors between Geumgang type and Jungbu type Pinus densiflora in 0-20-year-old stands and 40-60-year-old stands. Our results suggested that the reliability of the national forest biomass inventory could be improved by applying the ecotype- and age-dependent stem density and biomass expansion factors.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.5
• /
• pp.317-326
• /
• 2002

This study was conducted to determine the optimum planting dates and density of one year old Bupleurum falcatum L. to improve its productivity and quality. Two cultivars of B. falcatum, originated from Jeongseon, Korea and Mishima, Japan were used. Some of the results obtained are as follows : Jeongseon cultivar showed less stem branches and shoot weight compared to Mishima. However, Jeongseon cultivar showed tall plant height, high root fresh and dry weight, and high levels of saikosaponin, but low saikosaponin content than that of Mishima. Both cultivars seeded on March 20 had long main root, big stem diameter, few stem branch, and high saikosaponin c content compared to those of late seeded one, April 30. Growth characteristics such as plant height, stem diameter, stem branch number, shoot weight, root diameter, root fresh and dry weight, and root branch number were increased in a low planting $density(30\;{\times}\;15cm)$, but the content of saikosaponin was not affected by planting density. Jeongseon and Mishima cultivars seeded on April 10 with $30\;{\times}\;15cm$ planting density and April 30 with $30\;{\times}\;10cm$ planting density contained the highest total saikosaponin levels, respectively. However, average root dry weight were not affected by planting time or density in both Bupleurum cultivars.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.1
• /
• pp.99-107
• /
• 2013

This study was conducted to evaluate the effect of soil covering depth and vegetation base materials on the competition between Pinus densiflora Siebold & Zucc. and Lespedeza cyrtobotrya Miq., which were grown in an abandoned coal mine land for three years after seeding, by comparing their growth and stem density. The study site was consisted of sub-plots with four different soil covering depths (0cm, 10cm, 20cm, and 30cm) and four different compounds of vegetation base materials (peat moss (control), soil conditioner+peat moss (S+P), erosion control material+peat moss (E+P), and soil conditioner+erosion control material+peat moss (S+E+P)). Results of this study showed opposite pattern between P. densiflora and L. cyrtobotrya with different soil covering depth and compounds of vegetation base materials in general. P. densiflora showed the highest growth and stem density in plots with 10cm and 0cm depths of soil covering, respectively, while the lowest was shown in plots with 20cm depth of soil covering. In contrast, L. cyrtobotrya showed the highest growth and stem density in plots with 20cm depth of soil covering, while the lowest was shown in plots with 0cm depth of soil covering. In case of vegetation base materials, P. densiflora showed the highest growth and stem density in control plots and plots treated with S+P, respectively, while the lowest was shown in plots with S+E+P treatment. On the other hand, L. cyrtobotrya showed the highest growth and stem density in plots treated with S+E+P, while the lowest was shown in control plots. These results suggested the competition between two plants as a major cause of opposite patterns, which is induced by the suppressed growth and stem density of P. densiflora by fast growing L. cyrtobotrya. Despite the suppression of L. cyrtobotrya on P. densiflora, L. cyrtobotrya can play a positive role in improving soil quality, and thus it would be more desirable for restoring abandoned coal mine land to manage the growth of L. cyrtobotrya periodically, rather than eliminate them.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.149-153
• /
• 2011

This study was conducted to examine the uncertainty analysis of the stem density and biomass expansion factor for Pinus rigida in Korea. A total of 57 representative sample trees were harvested. The age class in Pinus rigida forests was divided into two, which were stands with less than 20 years and more than 21 years. The influence of stand ages on biomass expansion factor showed that it was statistically significant (p=0.0001), but it was not significant on stem density (p=0.8070). The results of this study based on the uncertainty evaluation method which were suggested by IPCC guide line indicated that stem density of the stand with less than 20 years were 30.92%, while were 25.12% the stands with more than 21years. The uncertainty in biomass expansion factor of less than 20 years and more than 21 years were 60.32% and 22.42%, respectively. The uncertainty of less than 20 years was higher compared to those stands with more than 21 years. In the case of old stand, it showed the lowest uncertainty results but younger stands showed the highest uncertainty results. This study could be applied to our country's emission factor by using stem density and biomass expansion factors which were less than 20 years and more than 21 years for Pinus rigida in Korea.

• Korean Journal of Plant Resources
• /
• v.17 no.2
• /
• pp.102-106
• /
• 2004

To determine the optimal planting density of wanggol in southern areas of Korea, Gangsan early local, the highest yielding variety was grown under four different plant density. Yield components such as stem length, number of tiller, stem diameter were highest at the plots with 18 cm row spacing and 18 cm plant spacing. Dry cortex and medulla yield were highest at the plots of 18 cm row spacing and 18 cm plant spacing. Judging from the results reported above, at optimum planting density of wanggol seemed to be 18 cm row spacing and 18 cm plant spacing.

• Plant Resources
• /
• v.4 no.1
• /
• pp.6-12
• /
• 2001

Growth and yield of licorice were investigated under the different conditions of ridge height, planting density, and irrigation in order to establish its cultural practices for the domestic production with the aim to substitute the import. Seedlings were grown under low ridge(20cm) and high ridge(40cm) in low density plot(60$\times$30cm) and high density plot(40$\times$30cm), respectively. The low ridge cultivation of large seedlings increased plant height and root length under low density, and stem and root diameter under high density compared to the high ridge cultivation. In the high ridge cultivation, high density plot was 1.1 to 1.3 times in plant height, root length, stem and root diameter as high as low density one. Fresh and dry weight of plant and root in high ridge were 1.3 to 1.5 times as high as those in low one. The growth of small seedlings(4~10g) were generally poor compared to that of large seedlings. High density plot in low ridge showed the good growth characteristics including plant height, root length, stem and root diameter, and number of branch. High density plot was 1.4 to 1.6 times in fresh and dry weight of plant and root as high as low density plot. In the seasonal changes of growth under various irrigation regimes, the twice irrigation a day produced the more number of leaf than the other regimes since around 46 days after transplanting. The former irrigation resulted in 1.2 to 1.4 times in plant height as long as the other irrigations around 26 days after transplanting and then the difference was increased to 1.6 to 2.0 times around 64 days after transplanting. Under the twice irrigation a day, plant height, root length, stem diameter, root diameter, number of leaf, fresh plant weight, dry plant weight, fresh root weight, dry root weight were 1.6 to 2.0, 1.1, 1.2 to 1.6, 1.3 to 1.8, 1.9 to 2.7, 1.7 to 8.0, 1.6 to 2.8,2.0 to 3.0, 1.6 to 2.7 times as high as those under the other irrigation regimes, respectively.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.104-109
• /
• 2019

The crops recommended for the plant factory system are diverse. The importance of planting density in the plant factory is being recognized. The objective of this study was to determine the optimal planting density for growth and quality of kohlrabi in a closed-type plant factory system. The kohlrabi was grown under fluorescent lamps and nutrient film technique system. The growth and quality of kohlrabi were investigated under four different planting densities ($22plants/m^2(15{\times}30cm)$, $27plants/m^2(15{\times}25cm)$, and $33plants/m^2(15{\times}20cm)$). There were no significant interactions between Shoot fresh and dry weights per plant or bulb stem fresh and dry weights per plant and planting density. Shoot fresh and dry weight per area or bulb stem fresh and dry weight per area were the highest at $33plants/m^2$. There were no significant interactions between plant height, leaf area, photosynthetic rate, hardness, and chlorophyll content and planting density. Significant differences in Bulb stem height and diameter, and brix were observed. Bulb stem height and diameter and brix of kohlrabi were the highest at $22plants/m^2$. Based on our results, we conclude that the optimal planting density is $33plants/m^2$ for growth of kohlrabi, however, the optimal planting density is $22plants/m^2$ for quality of kohlrabi in a closed-type plant factory system.