• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.2
• /
• pp.173-180
• /
• 1987

Symptom development and disease severity of Phytophthora blight in the sesame plants varied depending upon age of the plants tested, inoculation method, watering method, and inoculum density in both susceptible Suweon 9 and Suweon 26 and moderately resistant B-67 and IS 103 sesame lines to Phytophthora nicotianae var. parasitica when inoculated. However, successful differentiation of the sesame lines for varietal resistance was possible using 20-day old seedling, inoculation by soil infestation, saturated soil water condition by half immersion of pots in water tank, and 200 sporangia per one ml of inoculum. Spraying or soil inoculation to 70-day old plants also was effective in differentiating the varietal resistance. By the screening method Suwon 26 showed 100％ diseased plants and symptom severity index 9.0, while B-67 showed 20% diseased plants and symptom severity index 1.7. The rating scale given was from 0 through 9. For example, the scale 0 signified no symptom development, 5 signified discoloration of basal part of stem, and 9 signified discoloration of stem more than 10 cm high above the soil surface with blighted leaves. Differentiation in symptom severity also was made by percentage of the lesion area. Results evaluated using both parameters were well corresponded in varietal reaction of sesame to Phytophthora blight.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.55-55
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe?rature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.56-63
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe\ulcornerrature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.10-18
• /
• 2017

This study was carried out to suitable plantation site from comparison and analysis of regional early growth characteristics of planted Larix kaempferi trees in harvested L. kaempferi plantations. Two-year-old bare-root seedlings of L. kaempferi were planted with the density of $3000\;seedlings\;ha^{-1}$ at four sites (Yeongju, Gimcheon, Chuncheon, and Inje). All sites were established with three plots ($400m^2$ per plot) in 2010. We analyzed soil physical and chemical properties in October 2010 and 2013. We measured root collar diameter (RCD) and height of trees in October from 2010 to 2014, and then calculated H/D ratio and stem volume. Soil pH was significantly increased and available P was significantly decreased 3 years after planting. Annual mean RCD, height, and stem volume of 5-to 7-year-old in the Chuncheon site were significantly higher than those in the other sites, however them in the Yeongju site were the lowest. It is related to the fact that total nitrogen, available phosphorus, and organic matter concentrations in the Yeongju site were relatively lower than those in the other sites. As a results of this study, we could confirm the correlation between soil properties of L. kaempferi plantations and growth of L. kaempferi trees. We could suggest values of soil properties for reforestation of L. kaempferi.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.2
• /
• pp.134-142
• /
• 2008

This work aims to obtain basic information for seed propagation of Hydrangea serrata for. acuminata. The germination percentage of the seeds taken on 15 November, 30 December, and 23 January was $90.0{\pm}4.16%$, $84.4{\pm}5.52%$, and $88.9{\pm}2.40%$, respectively. This suggest that seeds of Hydrangea serrata for. acuminata are non-dormant seeds. The optimum temperature for germination was $25^{\circ}C$ and light was necessary. Most of the growth parameters (shoot and leaf length, stem diameter, root length, no. of roots, T/R ratio, and fresh and dry wts.) were significantly greater at $25/20^{\circ}C$ and $25^{\circ}C$ than at the other temperatures. Low T/R ratio at relatively cool temperatures (15 and $20^{\circ}C$) was caused by suppressed top growth. In light quality treatment, red light (RL) significantly enhanced stem elongation. The greatest photosynthetic pigments (total chl, chl a/b, and carotenoid) were observed in seedlings grown in blue light (BL), followed by seedlings grown in RL+BL. When blue light was added, higher pigment contents were found. Effect of plug cell size (50, 72, 128, 162 and 200 cells) on the growth of seedlings was investigated. The highest top growth was observed in seedlings grown in 50 cell trays, followed by seedlings grown in 72, 128, 162, and 200 cell trays. However, there was no significant differences between 162 and 200 cell trays. Especially, smaller size leaves were observed in seedlings grown in smaller cell trays (lower volume and high plant density).

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.61-61
• /
• 2020

This experiment was carried out using artificial bed soil and LED in the plastic film house(irradiation time: 07:00-17:00/day). Seedlings(n=63 per 3.3 m²) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity(40-160 µmol/m²/s). Average air temperature from April to September according to the light intensity test was 20.4℃-20.9℃. Average artificial bed soil temperature was 20.1℃-21.7℃. The test area where fluorescent lamp was irradiated tended to be somewhat lower than the LED irradiation area. The chemical properties of the test soil was as follows. pH levels was 6.6-6.7, EC levels 0.9-1.3 dS/m and OM levels 30.6-32.0%. The available P₂O₅ contents was 73.3-302.3 mg/kg. Exchangeable cations K and Ca contents were higher than the allowable ranges and mg content was high in the fluorescent lamp treatment. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PPFD(Photosynthetic Photon Flux Density) value, illuminance and solar irradiation. Fluorescent lamp treatment had high illuminance value, but PPFD and solar irradiation were lower than LED intensity 40 µmol/m²/s treatment. The photosynthetic rate increased(2.0-3.8 µmolCO²/m²/s) as the amount of light intensity increased, peaking at 120 µmol/m²/s, and then decreasing. The SPAD (chlorophyll content) value decreased as the amount of light intensity increased, and was the highest at 36.1 in fluorescent lamp treatment. Ginseng germination started on April 5 and took 14-17 days to germinate. The overall germination rate was 68.8-73.6%. The growth of aerial parts(plant height etc.) were generally excellent in the treatment of light intensity of 120-160 µmol/m²/s. The plant height was 41.9 cm, stem length was 24.1 cm, leaf length was 9.8 cm and stem diameter was 5.6 mm. The growth of underground part (root length etc.) was the best in the treatment with 120 µmol/m²/s of light intensity. Due to the root length was long(24.8 cm) and diameter of taproot was thick(18.7 mm), the fresh root weight was the heaviest at 24.8 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping-off caused by Rhizoctonia solani occurred 0.6-1.5% and incidence ratio of rusty root ginseng was 30.8-62.3%. It is believed that the reason for the high incidence of rusty root ginseng is that the amount of field moisture capacity of artificial bed soil is larger than the soil. Leaf discoloration rate was 13.7-32.3%.

• Journal of Wetlands Research
• /
• v.11 no.3
• /
• pp.49-59
• /
• 2009

Seasonal changes of the growth characteristics and biomass of Scirpus fluviatilis, a aquatic emergent vascular plant, were investigated to reveal the phenology and the population dynamics and to provide the fundamental resources for the restoration counterplan of the wetland vegetation in the littoral zone of the Upo wetland, Changnyeong-gun, Gyeongsangnam-do, Korea from March 2006 to November 2006. Scirpus fluviatilis was distributed commonly in Upo, Mokpo, Sajipo, Jokjibyeol, and Topyeongcheon upstream and downstream of Upo wetland, and the density was highest in Mokpo. Distribution range for the water depth was 9~49cm, and the highest shoot density in 26~49cm, and the mean shoot density was $119/m^2$, and the mean shoot length was 122.3cm on May 28. The number of the tuber was $104.5/0.25m^2$, and the living tubers were 84.2%. The mean fresh biomass of the living tubers was 3.0g, and those of 1~4g was most as 57.9%. Germination rates of the living tubers was 43.8%, and the maximum rate was in 7~9g and more than 10g. In the pot cultivation, the shoot density of the germinated tubers and the dormant tubers were highest as 13.5 and 9.7, respectively in early August. In the field study, the shoot density had few change before typhoon damage, while the density increased abruptly in November after flooding accompanied with the typhoon 'Ewiniar'. The shoot length in the pot cultivation and in the field study were 100~116cm and 60~170cm, respectively in the growth-end. Biomass allocation rates into the stem, leaf, flower, and underground parts were 8.9%, 6.6%, 0%, and 84.5%, respectively in the pot cultivation of the germinated tubers, and those of the dormant tubers were 7.1%, 7.1%, 0%, and 85.8%, respectively. The tuber number increased to 1.4~4.1 times by the growth-end, so it is concluded that Scirpus fluviatilis is mostly propagated by the vegetative reproduction.

• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.34-43
• /
• 1996

We investigated the vegetation structure, and effects of canopy degree(gap or purlieu to 25%, 50%, 75%, over 75%) of the overstory on seedling regeneration and survivorship, and sapling density, growth and growth type of Abies koreana in subalpine of Mt. Chiri. The stem density in Abies koreana stand was higher in middle story than upper story, individual trees in upper story occupied larger area and were more apart, resulted in uniform distribution. The regeneration and survivorship of seedlings and saplings were best in 25% of crown closure, in order of 50%, gap, but lowest in over 75% of crown closure. The annual growth rate and recent 5 years growth rate of saplings were highest in gap or purlieu and getting lower toward gradually higher coverage of overstory. And 10- to 20-Year-old saplings were mainly regenerated in stands with lower density(I or II), but most of 20 to 30 years old saplings were growing in stands with higher density (III or IV). The number of "A" type saplings grown normally in gap or purlieu was gradually decreased in stand with higher density but the number of "D" or "E" types of which growth was supressed or prohibited by the high density was abruptly increased. Saplings normally growing in the gap and purlieu showed the panicle type, but those grown under dense crown were greatly suppressed and showed the umbellate type.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.3
• /
• pp.245-252
• /
• 1989

This experiment was carried out to study the effects of nitrogen concentration of cultural solution, rhizobium inoculation, and planting density on nodulation, contents of total-N and allantoin-N of the plants, and contents of crude fat and protein of the seeds with 4 cultivars and 1 non-nodulation isogenic line (Hwangeumkong, Jangbaegkong, Paldalkong, Clark, non-nodulating Clark) in nutri-culture. Modulation was increased significantly by the rhizobium inoculation and decreased by the increase of nitrogen concentration of the cultural solution and planting density, and more nodule per plant was observed in Hwangeumkong than other cultivars. Total nitrogen contents of the soybean plant were higher in Hwangeumkong and Janbaegkong compared with other two cultivars, and were increased by rhizobium inoculation and the increase of nitrogen concentration of the cultural solution except in case of $R_3$ stage of non-inoculation of rhizobium, and was decreased by the increase of planting density. Allantoin nitrogen contents of stem were lower in Paldalkong compared with other cultivars and was increased significantly by the rhizobium inoculation, and thus was correlated significantly with nodulation. Allantoin-N contents were also decreased by the increase of planting density and nitrogen concentration of the solution, and was very low in case of non-nodulating isogenic line at any level of nitrogen concentration. The contents of crude fat of the seed were lower in cases of higher nitrogen concentration of the solution and more plants per pot, but no effects of rhizobium inoculation was observed. The contents of crude protein were tend to increase by the increase of nitrogen concentration, but were little effected by rhizobium inoculation and planting density.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.16-24
• /
• 2015

This study quantified storage and annual uptake of carbon for riparian greenspaces established in watersheds of four major rivers in South Korea and explored desirable strategies to improve carbon reduction effects of riparian greenspaces. Greenspace structure and planting technique in the 40 study sites sampled were represented by single-layered planting of small trees in low density, with stem diameter at breast height of $6.9{\pm}0.2cm$ and planting density of $10.4{\pm}0.8trees/100m^2$ on average. Storage and annual uptake of carbon per unit area by planted trees averaged $8.2{\pm}0.5t/ha$ and $1.7{\pm}0.1t/ha/yr$, respectively, increasing as planting density got higher. Mean organic matter and carbon storage in soils were $1.4{\pm}0.1%$ and $26.4{\pm}1.5t/ha$, respectively. Planted trees and soils per ha stored the amount of carbon emitted from gasoline consumption of about 61 kL, and the trees per ha annually offset carbon emissions from gasoline use of about 3 kL. These carbon reduction effects are associated with tree growth over five years to fewer than 10 years after planting, and predicted to become much greater as the planted trees grow. This study simulated changes in annual carbon uptake by tree growth over future 30 years for typical planting models selected as different from the planting technique in the study sites. The simulation revealed that cumulative annual carbon uptake for a multilayered and grouped ecological planting model with both larger tree size and higher planting density was approximately 1.9 times greater 10 years after planting and 1.5 times greater 30 years after than that in the study sites. Strategies to improve carbon reduction effects of riparian greenspaces suggest multilayered and grouped planting mixed with relatively large trees, middle/high density planting of native species mixed with fast-growing trees, and securing the soil environment favorable for normal growth of planting tree species. The research findings are expected to be useful as practical guidelines to improve the role of a carbon uptake source, in addition to water quality conservation and wildlife inhabitation, in implementing riparian greenspace projects under the beginning stage.