• 제목/요약/키워드: Steel Plate Insertion

검색결과 12건 처리시간 0.016초

드리프트 핀의 배열 형태가 집성재 접합부의 회전 거동 및 강도 성능에 미치는 영향 (Effect of Drift Pin Arrangement for Strength Property of Glulam Connections)

  • 이인찬;박천영;이전제
    • Journal of the Korean Wood Science and Technology
    • /
    • 제35권3호
    • /
    • pp.10-21
    • /
    • 2007
  • 집성재 다우얼 접합부가 적용되는 기둥의 기초, 기둥-보 접합부에는 회전이 발생하므로 접합부의 모멘트 성능에 대한 연구가 필요하다. 접합부의 회전에 의해서 섬유방향과 각을 이루어 작용하는 하중을 섬유방향에 평행한 하중과 수직한 하중으로 단순화 하여 거동을 해석하고 예측하였다. 드리프트 핀의 휨강도 및 지압응력을 평가하였으며, 섬유방향에 평행한 인장하중과 수직한 인장하중을 받는 접합부의 끝면 거리를 다르게 하여 접합부의 인장형 전단성능을 시험하였고 회전이 작용하는 접합부는 드리프트 핀의 개수와 배열 방향을 다르게 하여 시험하였다. 접합부에 인장하중이 작용할 때 항복 이후의 변형량은 드리프트 핀의 소성변형에 의해서 발생하며, 집성재의 끝면 거리 확보에 의한 드리프트 핀의 변형 흡수가 접합부 전체의 변형량에 영향을 주는 것으로 판단된다. 2개의 드리프트 핀이 섬유방향에 평행하게 배열된 경우(b2h)에는 섬유방향에 수직한 인장하중 거동을 나타내고, 2개의 드리프트 핀이 섬유방향에 수직하게 배열된 경우(b2v)에는 섬유방향에 평행한 인장하중 거동을 나타내는 것으로 평가된다. 4개의 드리프트 핀이 정사각 배열된 접합부의 경우(b4)에 2개의 드리프트 핀이 섬유방향에 평행하게 배열된 접합부(b2h)의 약 1.7배의 하중 성능을 나타냈으며, 접합부에 회전이 작용하여 섬유방향과 각을 이루는 하중을 섬유방향에 대한 평행 또는 수직한 하중으로 치환하여 거동을 평가, 예측하는 것이 가능하다고 판단된다.

淸州 및 報恩地方의 頭首工洪水災害에 關한 調査硏究(II) -災害原因 및 對策方案을 中心으로- (A Study on the Damages of Head Works by the Storm Flood in the Area of Cheong Ju and Boeun -Emphasis onFactors Influenced on the Disasters and their Countermeasures-)

  • 남성우;김철기
    • 한국농공학회지
    • /
    • 제24권2호
    • /
    • pp.49-55
    • /
    • 1982
  • The purpose of this study is to classify the factors influenced on the damages of head works suffered from the storm flood occurred on July 22 1980 in both Musim and Bochong rivers and to find out an integral counter measures against the causes influenced on the disaster of head works in the engineering aspect of planning, design, construction and maintenance. In this survey, number of samples was taken 25 head Works, and the counter measures against the causes of their disasters summarized was as follows, 1. In the aspect of planning a. As the flood water level after the establishment of head works is more increased than the level before setting of head works owing to having more gentle slope of river bed between the head works than nature slope of river bed. Number of head works should be reduced for the appropriate annexation of them b. In the place where head works is established on the curved point of levee, the destruction of levee becomes severe by the strong deflective current. Therefore the setting of head works on the curved point should be kept off as long as possible and in case of unavoidable circumstances the construction method such as reinforced concrete wall or stone wall filed with concrete and anchored bank revetments should be considered. 2. In the aspect of design a. As scoring phenomena at up stream is serious around the weir Where the concentration of strong current is present in such a place, up stream apron having impermeability should be designed to resist and prevent scoring. b. As the length of apron and protected bed is too short to prevent scoring as down stream bed, the design length should be taken somewhat more than the calculated value, but in the case the calculated length becomes too long to be profitable, a device of water cushion should be considered. c. The structure of protected river bed should be improved to make stone mesh bags fixed to apron and to have vinyl mattress laid on river bed together with the improvement for increasing the stability of stone mesh bags and preventing the sucked sand from the river bed. d. As the shortage of cut-off length, especialy in case of the cutoffs conneting both shore sides of river makes the cause of destruction of embankment and weir body, the culculation of cut-off length should be taken enough length based on seepage length. 3. In the aspect of design and constructions a. The overturing destruction of weir by piping action was based on the jet water through cracks at the construction and expansion joints. therefore the expansion joint should be designed and constructed with the insertion of water proof plate and asphalt filling, and the construction joint, with concaved shape structure and steel reinforcement. b. As the wrong design and construction of the weep holes on apron will cause water piping and weir destruction, the design and construction of filter based on the rule of filter should be kept for weep holes. c. The wrong design and construction of bank revetment caused the severe destruction of levee and weir body resulting from scoring and impulse by strong current and formation of water route behind the revetment. Therefore bank revetment should be designod and constructed with stone wall filled with concrete and anchored, or reinforced concrete wall to prevent the formation of water flow route behind the wall and to resist against the scoring and impulse of strong stream. 4. In the aspect of maintenance When the damaged parts occurred at head works the authorities and farmers concerned should find and mend them as soon as possible with mutual cooperation, and on the other hand public citizen should be guided for good use of public property.

  • PDF