• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.291-300
• /
• 2008

Catalytic cracking of n-octane was carried out over H-ZSM-5 zeolite catalysts after calcination with air and steaming with 100% steam in the temperature range of $550-750^{\circ}C$ for 24 h and compared with the results of thermal cracking. The increase of calcination and steaming temperature resulted in the decrease of surface area, pore volume, and strong acid sites, which was mainly caused by the dealumination of H-ZSM-5 framework. It was found by $^{27}Al$ and $^{29}Si$ MAS NMR that the dealumination was proceeded through the transformation process of tetrahedral framework Al${\rightarrow}$penta-cordinated Al ${\rightarrow}$ octahedral framework Al and the phenomena was much more severe in steaming conditions than that of calcination. In the catalytic cracking of n-octane, as the temperatures of calcination and steaming were increased, the conversion of n-octane, the selectivity of light olefins and ethylene to propylene ratio were decreased due to the dealumination of framework aluminum resulting the loss of acidic strengths. The conversion, selectivity of light olefins and ethylene to propylene ratio reached almost to the level of thermal cracking after steaming at $750^{\circ}C$ for 24 h.

• Korean journal of food and cookery science
• /
• v.14 no.2
• /
• pp.182-187
• /
• 1998

The changes in weight, reducing sugar content, sugar composition and enzyme activities (${\beta}$-amylase and invertase) of sweet potato were studied with three kinds of cooking methods, microwave oven, gas oven, and steaming. The weights of sweet potato cooked by microwave oven and gas oven were decreased with increasing cooking time, whereas that of steaming was increased with cooking time. Reducing sugar content of sweet potato cooked by microwave oven was increased till 40 seconds, but decreased thereafter. In the cooking methods using gas oven and steaming, reducing sugar content were increased with cooking time. And reducing sugar content were 334.60 mg/g and 381.29 mg/g, respectively at 100$^{\circ}C$ of cold point in sweet potato cooked by gas oven and steaming. Raw sweet potato consisted of fructose (1.56 mg/g), glucose (1.79 mg/g), sucrose (5.58 mg/g), and maltose (2.22 mg/g). The contents of fructose, glucose, and sucrose were decreased during cooking process. But maltose content was increased with cooking time. Especially, maltose contents were 24.81 mg/g and 28.10 mg/g at 100$^{\circ}C$ of cold point in sweet potato cooked by gas oven and steaming. The activities of ${\beta}$-amylase and invertase were decreased with cooking time. Microwave oven-cooked sweet potato did not show on invertase activity.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.2
• /
• pp.146-150
• /
• 2000

In order to enhance the yield and physical property of Korean red ginseng extract, preheating stage was added to the inception of red ginseng manufacturing process and its effect was investigated. Preheating of raw ginseng at $70^{\circ}C$ for 2 hour followed by steaming for 2 hours increased the yield of water and 60% alcohol extract most effectively. Those yields were the highest at the same condition as above except preheating time shortened to 1 hour at $70^{\circ}C$. Steaming time had little effect on the yield of water and 60% alcohol extract. The content of starch in red ginseng was reduced effectively by preheating of raw ginseng at $70^{\circ}C$. The brown color intensity of red ginseng increased in proportion to preheating temperature in the range of $50-70^{\circ}C$. However, there was no increase in the color intensity at $80^{\circ}C$.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.4
• /
• pp.365-371
• /
• 2003

This study was analyzed to the characteristics of the Lindera obtusiloba eaf teas by various manufacture methods. Moisture content was the highest in the tea processed by air dry method, and the lowest in the tea roasted after steaming. The contents of soluble solid was higher in the fermented tea than in the others, and the lowest in the roasted tea. The content of tannin was the higher in the roasted after steaming tea than in the others, and the lowest in the fermented tea. The content of vitamin C was the higher in the roasted tea than in the others, and the lower in the steamed tea. The mineral contents of leaf teas was orderly K, Na, Mn, Ca, Fe, Mg, and Zn. The roasted after steaming tea was estimated to the most excellent in the sensory evaluation of leaf teas.

• Food Science and Biotechnology
• /
• v.14 no.3
• /
• pp.363-367
• /
• 2005

Although widely applied in the food industry, extrusion cooking has not been applied to the traditional red ginseng process for steaming and drying ginseng. We therefore investigated the change in the effective components in red ginseng (total saponins, ginsenosides and maltol) from extruded raw ginseng. The variables were the drying temperature of the sliced raw ginseng (80 and $90^{\circ}C$) before the extrusion process and the moisture content (15 and 22%, w.b.) during the extrusion process. Ginsenosides Rg1 and Rg2 were detected in dried ginseng at $80^{\circ}C$, but ginsenoside Rg3, which was contained in red ginseng, was not detected. On the other hand, ginsenosides Rg1, Rg2 and Rg3 were detected in extruded ginseng at moisture contents of 15 and 22%. Total ginsenosides were highest at $90^{\circ}C$ drying temperature and 22% moisture content for the extrusion process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.2
• /
• pp.264-270
• /
• 1997

To obtain basic data for processing semi-dried salmon meat product, the results that were measured the textural properties of salmon meat during salting, sugaring and drying process followed. Drying time and temperature were longer, the moisture amount of salmon meat were reduced. Hardness of salmon meat was direct proportion to shear stress, but hardness was inverse proportion to cohesiveness during drying process. After sugaring and salting salmon meat, drying time was longer, hardness and shear stress of salmon meat were increased. The sensory evaluation of the textures of sugaring salmon meat dried for 3 hrs showed slightly good. In the changes of texture of salmon meat during steaming hardness and shear stress of salmon meat dried for 4 hrs were higher than that dried for 10 hrs. And steaming time was longer, hardness of salmon meat dried for 4 hrs was decreased and cohesiveness was not changed.

• Preventive Nutrition and Food Science
• /
• v.11 no.4
• /
• pp.311-317
• /
• 2006

Phenolic compounds in safflower seeds were recently found to stimulate bone formation and increase plasma HDL cholesterol levels in estrogen deficient rats, and to inhibit melanin synthesis. Nine phenolic compounds: $N-feruloylserotonin-5-O-{\beta}-D-glucoside,\;8'-hydroxyarctigenin-4'-O-{\beta}-D-glucoside,\;luteolin-7-O-{\beta}-D-glucoside$, N-(p-coumaroyl)serotonin, N-feruloylserotonin, 8'-hydroxy arctigenin (HAG), luteolin (LT), $acacetin-7-O-{\beta}-D-glucuronide$ (ATG) and acacetin (AT), were quantified by HPLC in safflower (Carthamus tinctorius L.) seeds during growth and processing. During growth, levels of the nine phenolic compounds in the seeds increased progressively with increasing growth stages, reached a maximum on July 30 (42nd day after flowering), and then remained relatively constant. During the roasting process, levels of phenolic compounds, except HAG, LT and AT, generally decreased with increased roasting temperature and time, whereas those of HAG, LT and AT increased progressively with increased roasting temperature and time. During the steaming process, levels of other phenolic compounds except HAG and AT generally tended to increase with increased steaming time, whereas those of HAG and AT were scarcely changed. During the microwave treatment, quantitative changes of phenolic compounds were similar to the roasting process, although there were some differences in levels of phenolic compounds between two heat treatments. These results suggest that the steamed safflower seeds after harvesting on late July may be useful as potential dietary supplement source of phenolic compounds for prevention of several pathological disorders, such as atherosclerosis and osteoporosis and aging.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.4
• /
• pp.238-244
• /
• 2012

In general, stepwise hot steaming process is known to be effective in improving its biological activities; however, not much employed in processing Codonopsis lanceolata due to its hardness. In this study, C. lanceolata was first pretreated with warm water at $50^{\circ}C$ and $60^{\circ}C$ for two hours, then steamed for 3 hours. Antioxidant activities of 70% ethanol extracts were compared with the extract from the water solvent: 41.58% vs 8.98% of DPPH radical scavenging activity in adding $1.25mg/m{\ell}$ of steamed extract and water extract, respectively. Reducing power of steamed and fresh C. lanceolata were also measured as 1.39 and 0.71. Total poly phenolic of the steamed extract was estimated as 12.11mg/g, compared to 3.98mg/g fresh C. lanceolata. Total flavonoid contents were also obtained as 11.48mg/g, compared to 7.11mg/g of fresh C. lanceolata. In comparing phenolic acids profiles in the extract, in general higher amounts of gallic acid, trans-ferulic acid, vanillic acid were obtained possibly by easy release of active components during thermal processing, which results in better antioxidant activities than that of water extract. This findings can also be supported by result that the ethanol extract showed better activities than the water extract.

• Journal of Haehwa Medicine
• /
• v.13 no.2
• /
• pp.187-196
• /
• 2004

Now many sustitution and false articles is used in korea instead of shanyao. To use shanyao correctly, we will make a quilitative certificational plan of shanyao to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source About a source of shanyao, though korea and china has a each other source, we think there is no problem in use of both. 2) Process In our country producing shanyao as medical use is a 'duanma', we can divide into peeling and non-peeling, drying at bulks and at briquets, steaming shanyao and fresh shanyao. Regardless of existence for peeling and steaming, a distributing shanyao is received a proper judgment. Like this result was expressed by insufficiency of standards about medical components or indicating components. We detected a reminding S02 more than 10 ppm. And this expresses that there ia a problum at a drying method. To suggest proper processing methods, a standard of quility will have to be made which the existence of peeling, difference of quility between 'changma' and 'duanma', drying method and exudation test with cutted thickness are adaptable. Besides, 'maoshanyao' and 'guangshanyao' of china is processed by various methods which decrease a medical effect such as too much soaking shanyao in water, steaming with a sulfur, too much peeling, So we must process shanyao like the next methods. (1) When harvesting, dig deeply not to cut off roots. (2) Not to peel, wash shanyao in a washing machine. (3) Dry to 50-60% degree at sunny place or drying machine. (4) To be easy for drying and exudation, cut off a thick piece with 5 mm (5) Dry perfectly at ding machine. 3) Quality3) Quality (1) Functional standards It is not Proper that 'guangshanyao' is used in china because it has a problem with quility on process of working, If they did not soak shanyao in water or heat with steam, it is the real situation that they cannot cutt off shanyao evenly. In conclusion, shanyao must be heavy, powdery with a perfectly non-peeling surface, section surface is yellow-white color, unequal and has no holes. (2) Physicochemical standards It is the real situation that we can not distinguish into quility of shanyao with established test because various workings which decrease medical effects is used. Therefore we suggest a testing standard of S02 which is used in bleaching. And testing standards relatived with decrease of medical effects must be established at once. It must that Dry on loss is less than 14.0%, content of ash is less than 6.0%. Content of acid-nonsoluble ash is less than 0.5%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agricultural medince.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.65-73
• /
• 1989

Steam explosion process is an efficient pretreatment method for sparating and utilizing wood main components has attracted attention in utilization of ligno-cellulosic biomass. In order to obtain the effective pretreatment condition. this study was made explosion apparatus. examined the composition. extraction of exploded wood. Wood chips of pine(Pinus densiflora oak (Quercus serrata) and birch wood (Belula platyphylla var. japonica) were treated with a high pressure steam(20-30 kg/$cm^2$, 2-6 minutes). The results can be summarized as follow; In analysis of exploded wood(EXW). It was found arabinose residues rapidly decreased with increasing of steaming time and pressure. Extractives of EXW with sodium hydroxide increased with increasing of steaming-time and- pressure especially extractives 1% sodium hydroxide has higher than other extracted method extractives of hard wood(oak, birch) has higher than pine wood. In EXW extracted with sodium hydroxide and methanol lignin was partially delignified alkali extraction was more delignified than methanol extraction hardwood than pine wood.