• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1569-1573
• /
• 2008

본 논문은 핵발전소 증기발생기의 초음파 비파괴 검사용 프로그램 개발에 관한 것이다. 개발된 프로그램은 A, B, C, D-스캔과 같은 고전적인 해석방법뿐만 아니라 3차원 영상처리 기법을 이용하여 증기발생기 내부에 발생한 결함을 해석하고 검출할 수 있다. 결함의 3차원 영상은 핵발전소의 파이프라인으로부터 얻어진 1차원 초음파 데이터를 EMD(Empirical Mode Decomposition)로 분석해 결함의 위치를 구하고 voxel을 이용하여 구현하였다. 얻어진 3차원 영상은 2차원 해석방법을 사용하지 않더라도 결함의 위치, 형태, 크기 등과 같은 유용한 정보를 얻는데 용이하다. 개발된 프로그램은 이미 결함의 위치 및 모양, 크기 등을 알고 있는 시편의 측정에 사용하여 프로그램의 정확성을 검증하였고, 3차원 영상으로 결함의 입체적 모양을 구현하였다.

• 대한인간공학회지
• /
• 제36권5호
• /
• pp.559-568
• /
• 2017

Objective: The aim of this study is to investigate the effective managerial factors influencing dose reduction of the nozzle dam installation and removal tasks ranking within top 3 in viewpoint of average collective dose of nuclear power plant maintenance job. Background: International Commission on Radiation Protection (ICRP) recommended to reduce unnecessary dose and to minimize the necessary dose on the participants of maintenance job in radiation fields. Method: Seven sessions of nozzle dam installation and removal task logs yielded a multiple regression model with collective dose as a dependent variable and work time, number of participants, space doses before and after shield as independent variables. From the sessions in which a significant reduction in collective dose occurred, the effective managerial factors were elicited. Results: Work time was the most important factor contributing to collective dose reduction of nozzle dam installation and removal task. Introduction of new technology in nozzle dam design or maintenance job is the most important factor for work time reduction. Conclusion: With extended task logs and big data processing technique, the more accurate prediction model illustrating the relationship between collective dose reduction and effective managerial factors would be developed. Application: The effective managerial factors will be useful to reduce collective dose of decommissioning tasks as well as regular preventive maintenance tasks for a nuclear power plant.

• 소성∙가공
• /
• 제28권6호
• /
• pp.335-346
• /
• 2019

Thick plate forming is presented to manufacture a large and curved member of steam turbine diaphragm. Due to three-dimensional asymmetry of target geometry, it is hard to consistently keep the blank position in die cavity between forming punch and die. In order to relieve the position instability of the blank during the thick plate forming, a blank support structure is proposed to be composed of guide pins and linear bearing, and blank guide arm enlarged from both longitudinal ends of the thick blank. In this study, parametric investigations with regard to the geometric position and width of the blank guide arm are carried out. As main geometric parameters, 2 positions such as maximum curvature region and minimum one on a curved cross-section profile of the target shape are selected, and 14 widths of the blank guide arm are considered. Using 28 variable combinations, three-dimensional numerical simulations are performed to predict the appropriate range of the process parameters. The compatibility and validity of the blank support structure with the blank guide arm for the thick plate forming is verified through the thick plate forming experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.348-353
• /
• 2001

Experimental schemes that enable characterization of phase-change phenomena in the micro scale regime is essential for understanding the phase-change kinetics. Particularly, monitoring rapid vaporization on a submicron length scale is an important yet challenging task in a variety of laser-processing applications, including steam laser cleaning and liquid-assisted material ablation. This paper introduces a novel technique based on Michelson interferometry for probing the liquid-vaporization process on a solid surface heated by a KrF excimer laser pulse (${\lambda}=248nm,\;FWHM=24\;ns$) in water. The effective thickness of a microbubble layer has been measured with nanosecond time resolution. The maximum bubble size and growth rate are estimated to be of the order of $0.1{\mu}m\;and\;1\;m/s$, respectively. The results show that the acoustic enhancement in the laser induced vaporization process is caused by bubble expansion in the initial growth stage, not by bubble collapse. This work demonstrates that the interference method is effective for detecting bubble nucleation and microscale vaporization kinetics.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.115-126
• /
• 2001

In this paper, through a series of comparative experiments, effects of two different cure processing methods, cocure and precure, on the mechanical properties of honeycomb core materials for aircraft applications are considered. Mass of moisture accumulated into the closed cells of the sandwich panel specimen from the measured mass of moisture diffused to the full saturation state into the elements(skin, adhesive layer, Nomex honeycomb), consisting the honeycomb sandwich specimen has been calculated. Water reservoir of 70$\^{C}$ was used to have specimens absorb moisture to see the influence of moisture absorbed into sandwich panel on its mechanical properties. For the repair condition holding for 2 hours at 177$\^{C}$(350℉) temperature, a pressure due to the vapor expansion in each cell of the sandwich panel, which may result in the local separation of the interface between laminated skin and the surface of the honeycomb, has been estimated by vapor pressure-temperature relation from the thermodynamic steam table and compared to the pressure from the ideal gas state equation. The bonding strengths of the laminated skins on the flat surface of the Nomex honeycomb have been compared by the flatwise tension test and climbing drum peel test performed at room temperature for dry, wet and wet-repair specimens, respectively.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.83-88
• /
• 2000

Laser cladding processing allows rapid transfer of heat to the material being processed with minimum conduction into base metal, resulting in low total heat input. The effects of Nd:YAG laser cladding with wire feeding on the mechanical properties of Inconel alloy were investigated. inconel alloy is used as the material of nuclear steam generator tubing because of its mechanical properties and corrosion resistance properties. The device for Nd:YAG laser cladding with wire feeding was designed. It consists of the wire feeding system, the wire cladding system and the shielding gas system which prevents the clad layer from being oxidized. Experimental as results indicated that the wire feeding direction and position were important for laser cladding with wire feeding. The wire feeding speed should be adapted according to cladding speed for good shaping of clad layer. The effect of heat on the HAZ size can be limited and the growth of grain size of HAZ size was not serious. The hardness of clad layer and heat affected zone increased with increasing of cladding speed.

• 한국연초학회지
• /
• 제28권2호
• /
• pp.67-74
• /
• 2006

This study was carried out to investigate the changes of essential oils in flue-cured leaf tobacco during aging for 21 months. The threshed leaf tobacco(BlO) produced in 2002 crop year was aged for 21 months in the warehouse of Oc-Cheon Leaf Tobacco Processing Factory. The leaf tobacco were sampled at three month intervals for analysis of volatile compounds. Volatile compounds were identified by GC/MS and comparison of gas chromatographic retention time with those of the authentic standard. The total of 75 compounds from the steam volatile concentrate of the flue-cured leaf tobacco were identified; they were 15 hydrocarbons, 12 alcohols, 3 aldehydes, 18 ketones, 7 esters, 10 acids, 3 phenols, 4 furans, 2 pyrrols and 1 pyridine. The major components of essential oil were neophytadiene, solanone, megastigmatrienone and phytol. After a aging period of 21 months, most of volatile compounds showed a gradual increasing tendency.

• 한국식품영양학회지
• /
• 제25권1호
• /
• pp.50-56
• /
• 2012

This paper examines the effects of various methods of soft steaming(i.e., forced convection-boiler, forced convection-fan, and natural convection) on the quality of potatoes. In particular, the paper investigates the effects of cooking conditions (the steaming method, the treatment time, and the temperature) on the color(L, a, b), moisture content, texture profile, and ascorbic acid of potatoes. The results indicate that not only the cooking method, the treatment time, and the temperature but also the heat transfer mechanism had considerable influence on potato quality. In addition, natural convection steaming was superior to other treatment methods in terms of nutrient retention and texture maintenance. The results of this study should be useful for establishing commercial standards for processing potatoes and improving the quality of thermally processed foods.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.322-326
• /
• 2008

In this paper, we have studied the images which have been reconstructed by using combination of images acquired by the variation of operating frequency. When inner images have been reconstructed, they have been superposed by the surface state effect. In this case, the images of the phase object can be enhanced by the contrast of inner images. There is a kind of specimen, one is a reference block having 1/4T, 1/2T, 3/4T side drilled holes as main run piping material of the steam generator in nuclear power plants. It has been shown that the two results of defect shapes have better than before in this processing and phase contrast grow about twice. And we have constructed the acoustic microscope by using a quadrature detector that enables to acquire the amplitude and phase of the reflected signal simultaneously. Further more we have studied the reconstruction method of the amplitude and phase images, the enhancement method of the defect images' contrast.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.370-377
• /
• 2000

The red ginseng is very popular as a health food. It has been manufactured with raw ginseng by the conventional method. But, the yield of the heaven grade ginseng (the best quality red ginseng) among the whole products is around 5-7％, Therefore, the yield should be improved in order to increase economic returns. In this study, a new model of drying system was developed to improve the yield of heaven grade ginseng from 7% to 15% or more. For this system, temperature and relative humidity were controlled by the feedback control system, and a solenoid valve for steam supply and other variables were controlled by the PC. The special features of this system developed are an image processing system for monitoring the red ginseng during the drying process in the drying chamber, and a cylindrical porous tray for holding ginseng that is rotating with the speed of 0-10rpm in the drying chamber and makes uniform drying of red ginseng possible.