• Composites Research
• /
• 제20권5호
• /
• pp.43-48
• /
• 2007

전자기파의 흡수와 간섭 문제는 상업적, 군사적 용도에서 중요한 문제로 다루어져 왔다. 스텔스 기술은 전자기파 흡수 기술의 가장 전형적인 적용 방법 중에 하나이다. 본 연구는 유전성 및 자성 손실을 함유한 복합성의 필러를 개발하고자 시작되었다. 전도성 나노 소재인 탄소나노섬유 (CNFs)에 자성을 부여하기 위해 두 가지의 니켈-인과 니켈-철을 무전해 도금을 적용하여 각각 코팅하는 실험에 성공하였다. 제작된 복합 소재의 미세 구조를 SEM/TEM을 통해 관찰하였고, 이들의 성분 분석(EDS/ELLS)을 수행하였다. 코팅 층의 평균 두께는 약 $50\;{\sim}\;100\;nm$의 결과를 나타내었으며, 코팅 층의 성분은 Ni-6wt%P와 Ni-70wt%Fe의 결과를 각각 나타내었다.

• 한국해양공학회지
• /
• 제24권3호
• /
• pp.38-45
• /
• 2010

A study on the infrared signature of a naval ship by the solar elevation was performed using the well known IR signature analysis software, ShipIR/NTCS. The contrast radiant intensity of a ship against the Eastern Sea background from sunrise to noon was investigated. Monthly averaged climate data for both January and July were applied to investigate the seasonal change in the signature. A study on the signature for different ship speeds was also carried out. Simulation results showed that the maximum signature in both wave-bands for a sea-level observer occurred at around 25~35 degrees of solar elevation and was highly dependent on the ship geometry rather than the solar irradiance.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.974-978
• /
• 2011

The beam-matter interaction with various coating effects has received continued attention in the high power laser community. Previous works suggest that coatings promote target damage when compared to beaming on uncoated surface. Three types of paint coatings(Acrylic urethane, Silicone alkyd and Stealth blend) and a water coat on metals(Al, Ti and STS) are irradiated with a $CO_2$ laser. Both strain and temperature measurements are provided for assessing the instantaneous response characteristics of each coating on different metals. A selective combination of surface coats with metals has proven effective in either preventing or enhancing damage, both thermal and mechanical, associated with focused beaming on a target.

• International Journal of Advanced Culture Technology
• /
• 제12권1호
• /
• pp.249-253
• /
• 2024

The ultimate purpose of this study is as follows: The current primary concern in the defense sector revolves around how to strategically utilize Fourth Industrial Revolution technologies in combat. The Fourth Industrial Revolution denotes a shift towards an environment where automation and connectivity are maximized, driven by technologies such as artificial intelligence. Coined by Klaus Schwab in the 2015 Davos Forum, this term highlights the significant role of machine learning and artificial intelligence. Particularly, the military application of Fourth Industrial Revolution technologies is expected to be actively researched and implemented. Combat involves military actions between units, typically conducted as part of a larger war, with units striving to achieve one or more objectives. The concept of combat refers to the fundamental ideas of how units should engage with the enemy, both presently and in future scenarios, to achieve assigned objectives.

• 센서학회지
• /
• 제31권2호
• /
• pp.120-124
• /
• 2022

With advancements in underwater stealth technology for naval vessels, new sensor configurations for detecting targets have been attracting increased attention. Latest underwater mines adopt multiple sensor configurations that include electric field sensors to detect targets and to help acquire accurate ignition time. An underwater electric field sensor consists of a pair of electrodes, signal processing unit, and preamplifier. For detecting underwater electric fields, the preamplifier requires low-noise amplification at ultra-low frequency bands. In this paper, the specific requirements for low-noise preamplifiers are discussed along with the experimental results of various setups of matched transistors and chopper stabilized operational amplifiers. The results showed that noise characteristics at ultra-low frequency bands were affected significantly by the voltage noise density of the chopper amplifier and the number of matched transistors used for differential amplification. The fabricated preamplifier was operated within normal design parameters, which was verified by testing its gain, phase, and linearity.

• 한국전자파학회논문지
• /
• 제27권2호
• /
• pp.198-207
• /
• 2016

바이스태틱(Bistatic) 레이다는 기존의 모노스태틱(Monostatic) 레이다로는 수행하기 어려운 저피탐(stealth) 표적에 대한 탐지 및 식별을 용이하게 해준다. 하지만 표적식별을 위해 바이스태틱 레이다의 수신신호로부터 고해상도 거리 측면도(high resolution range profile: HRRP)를 형성할 시, 바이스태틱 고유의 기하구조로 인해 바이스태틱 HRRP 내 왜곡현상이 발생하고, 이는 표적에 대한 정확한 거리 정보를 획득하기 어렵게 한다. 더욱이 바이스태틱 HRRP 내 나타나는 표적의 전자기적 산란 메커니즘은 바이스태틱 기하구조에 따라 다양하게 변하기 때문에 효율적인 훈련 데이터베이스 구축은 바이스태틱 표적식별에서의 핵심 사항이 된다. 본 논문에서는 모노스태틱 표적식별에서 효과적인 성능을 보였던 비행 시나리오에 기반한 훈련 데이터베이스 구축 기법을 바이스태틱 표적식별에 적용해 보고, 그 성능과 효율성을 분석한다. 시뮬레이션에서는 레이다와 표적의 거리가 충분히 먼 경우, 비행시나리오에 기반한 데이터베이스를 이용하여 효율적으로 바이스태틱 표적식별을 수행할 수 있음을 보인다.

• 한국정보전자통신기술학회논문지
• /
• 제12권4호
• /
• pp.425-433
• /
• 2019

본 논문에서는 10m급 무인수상정의 RCS 해석과 함께 RCS 증가 요인을 분석하고 RCS 감소 방안을 도출하였다. 기하학적 형상을 변형시키는 성형기법을 통해 레이다 단면적을 감소시킬 수 있고, 이것을 스텔스 무인수상정 개발에 활용할 수 있음을 확인한다. RCS 감소를 위해 기존의 Top Mast 부분을 함미부분으로 1m 이동시키고 경사각 5도를 준 후 0.5 m 아래로 이동시킨 다음 중앙과 주변 반사 구조물에 대한 영향을 최소화시키기 위해 주변에 Guided Wall을 추가 설치하였다. 기존 모델과의 RCS 해석 값을 비교 분석한 결과 모든 고각에 대해 감소 대책이 적용된 모델이 기존 모델보다 -3.79 dB 이상 낮아진 것을 알 수 있으며, 최대 대푯값은 기존 모델 고각 0도의 12.74 dB에서 6.32 dB로 낮아졌다. 특히, 희생각 영역을 제외한 영역에서 강한 산란 현상이 상당부분 제거된 것을 확인할 수 있다. 또한, Guide wall을 추가한 -5m ~ 2 m 부분의 경우 반사되는 신호가 최대 20 ~ 40 dB 이상 개선되어 2D ISAR 영상에 나타나지 않는 것을 알 수 있다. 무인수상정 RCS 분석은 거리방향 프로파일 분석과 ISAR 영상 분석을 통해 문제 위치를 분석, 식별하는 과정을 설명하였으며, 그에 대한 문제를 해결할 수 있는 RCS 감소 방안을 함께 제시하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권2호
• /
• pp.171-175
• /
• 2017

The high-tech large warships are minimal and they are always monitored by opponents, and become primary targets when conflicts occur. The improvement in reducing susceptibility has significant importance because it is difficult for a ship to maintain mission capability and functionality once it is damaged. Ordinary decoys are effective only under the premise that the ship has already been exposed. Traditionally, for naval vessels, techniques related to the radar have been used in military stealth techniques to ensure confidentiality. The corner reflector, on the other hand, can produce rather large radar cross sections. Continued use of deceptive systems such as chaff during operations will help to improve survivability of naval ships. From this viewpoint, corner reflector was considered for making radar countermeasures and deception technology. This paper reviews the current status of corner reflector basis decoys and the technical feasibility of corner reflectors for developing structural decoys.

• 한국군사과학기술학회지
• /
• 제23권4호
• /
• pp.328-336
• /
• 2020

This paper presents an asymptotic analysis method using the PO(physical optics) approximation technique to analyze the scattering contribution of an electrically large object partially coated with a radar absorbing material(RAM). By using the feature of the PO technique that can calculate the equivalent current value for each mesh independently, instead of analyzing the entire structure, scattering analysis was performed only by calculating the current on the area where the RAM coating is applied. By the numerical examples, the accuracy and the computation time of the proposed method were verified, and the computational efficiency of inverse synthetic aperture radar(ISAR) of the electrically large objects that require enormous resources is improved.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.77.2-77.2
• /
• 2015

Recently, metamaterials attracted much attention because of the potential applications for superlens, cloaking and high precision sensors. We developed several dielectric metamaterials for enhancing antireflection or light trapping capability in solar energy harvesting devices. Colloidal lithography and electrochemical anodization process were employed to fabricate self-assembed nano- and microscale dielectric metamaterials in a simple and cost-effective manner. We improved broadband light absorption in c-Si, a-Si, and organic semiconductor layer by employing polystyrene (PS) islands integrated Si conical-frustum arrays, resonant PS nanosphere arrays, and diffusive alumina nanowire arrays, respectively. We also demonstrated thin metal coated alumina nanowire array which is utilized as an efficient light-to-heat conversion layer of solar steam generating devices. The scalable design and adaptable fabrication route to our light management nanostructures will be promising in applications of solar energy harvesting system. On the other hands, broadband invisible cloaks, which continuously work while elastically deforming, are developed using smart metamaterials made of photonic and elastic crystals. A self-adjustable, nearly lossless, and broadband (10-12GHz) smart meatamaterials have great potentials for applications in antenna system and military stealth technology.