• 터널과지하공간
• /
• 제4권2호
• /
• pp.102-118
• /
• 1994

Thermomechanical analysis is conducted on the radioactive repository in deep rock mass considering the in-situ stress, excavation and thermal loading of a radioactive waste. Thermomechanical properties of a discontinuous rock mass are estimated by a theoretical method so called sequential analysis. Using the estimated properties as input for finite element analysis, the influence on temperature distribution and thermal stress is analyzed within the scope of 2-dimensional steady state and transient heat transfer and coupled thermal elastic plastic behaviour. Granitic rock mass is taken for this analysis. The analysis is done for two different rock mass conditions, i.e. continuous-homogeneous and highly jointed conditions, for the purpose of comparison. In the case of steady state, the extent of disturbed zone around the storage tunnel due to the heat production of the spent-fuel canister varies depending on the thermomechanical properties of the rock mass. In the case of transient analyses, the response of the jointed rock mass to the thermal loading after radioactive waste disposal varies significantly with time, resulting in dramatic changes in the both size and location of disturbed zone.

• 제어로봇시스템학회논문지
• /
• 제22권4호
• /
• pp.276-280
• /
• 2016

Due to the increasing interest in safety and consistent product quality over a past few decades, demand for effective quality monitoring and safe operation in the modern industry has propelled research into statistical based fault detection and diagnosis methods. This paper describes the application of Hotelling $T^2$ index based Principal Component Analysis (PCA) method for fault detection and diagnosis in industrial processes. Multivariate statistical process control techniques are now widely used for performance monitoring and fault detection. Conventional methods such as PCA are suitable only for steady state processes. These conventional projection methods causes false alarms or missing data for the systems with transient values of processes. These issues significantly compromise the reliability of the monitoring systems. In this paper, a reliable method is used to overcome false alarms occur due to varying process conditions and missing data problems in transient states. This monitoring method is implemented and validated experimentally along with matlab. Experimental results proved the credibility of this fault detection method for both the steady state and transient operations.

• 한국자동차공학회논문집
• /
• 제23권3호
• /
• pp.287-291
• /
• 2015

This study investigates the result of thermal stress analysis on disk rotor by classes at bike brake. In the analysis result of thermal deformation at the steady state, maximum deformations at models 1, 2 and 3 are 0.14347mm, 0.15823mm and 0.16028mm respectively. The deformation becomes larger as the field goes on from the center to the outside at disk rotor. As there are models 1, 2 and 3 in the order of maximum deformation, model 1 has safest among three models. In the analysis result of thermal stress at steady and transient states, there are models 1, 2 and 3 in the order of maximum stress. Model 1 becomes most excellent on strength and safety among three models. By using the analysis result of disk rotor model at bike disk, it is possible to design the model applied practically at the safe driving of bike.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.2032-2041
• /
• 2004

Results from an experimental study of flow distribution in a close-coupled catalytic converter(CCC) are presented. The experiments were carried out with a flow measurement system specially designed for this study under steady and transient flow conditions. A pitot tube was a tool for measuring flow distribution at the exit of the first monolith. The flow distribution of the CCC was also measured by LDV system and flow visualization. Results from numerical analysis are also presented. Experimental results showed that the flow uniformity index decreases as flow Reynolds number increases. In steady flow conditions, the flow through each exhaust pipe made some flow concentrations on a specific region of the CCC inlet. The transient test results showed that the flow through each exhaust pipe in the engine firing order, interacted with each other to ensure that the flow distribution was uniform. The results of numerical analysis were qualitatively accepted with experimental results. They supported and helped explain the flow in the entry region of CCC.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.475-480
• /
• 2000

The transient dynamic-response analysis of fuel-storage tanks of flying vehicles accelerating in the vertical direction is achieved with finite element method. A fuel-storage tank is a representative example of the fluid-structure interaction problem, in which structure and fluid media interact strongly. For the accurate analysis of this complicated fluid-structure system, we employed ALE(arbitrary Lagrangian-Eulerian) coupling method. Two types of fuel-storage tanks, one with two baffles and the other without baffle, are considered to examine the effect of baffles. The fuel-storage tank with baffles shows more uniform hydrodynamic pressure distribution, resulting effective stress in structural region and faster convergence from transient to steady states. MSC/Dytran, a commercial FEM software for the 3D coupled dynamic analysis, is used for this analysis.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.28-35
• /
• 1999

In this study, investigation of transient knock characteristics in a spark-ignition engine has been carried out. The universal knock threshold values were found by a DFDD method and a NSDBP method which is a non-dimensional version of the SDBP method. Also modified NSDBP method could be used for transient knock detection. In a commercial ECU , spark timing was retarded from the steady -state spark timing during rapid throttle opening to avoid uncomfortable feeling and knock. Knock usually occurred just after the start of rapid throttle opening when spark timing was set, as values for the steady state condition. We found that air/fuel ratio deeply involved with the knock during transient condition. Due to the difference of initial heat release rate, knock occurred more easily at rich air/fuel ratio than at lean air/fuel ratio.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.292-295
• /
• 2002

In this work, transient characteristics of NPT(Non Punch Through)-IGBT(Insulated Gate Bipolar Transistor) have been studied with different temperatures analytically. Power losses are caused by heat generated in MIT-IGBT for steady state and transient state conditions. We therefore have focused on the analysis of excess carrier concentration and excess charge injected into N-drift layer with different temperatures and have obtained anode voltage drop during turn-off with lifetime of 2.4[${\mu}$s].

• International Journal of Aerospace System Engineering
• /
• 제2권1호
• /
• pp.47-52
• /
• 2015

The transient phenomenon of self-powered energy-harvesting is assessed using a bond-graph method. The bond-graph is an energy-based approach to describing physical-dynamic systems. It shows power flow graphically, which helps us understand the behavior of complicated systems in simple terms. Because energy-harvesting involves conversion of power in mechanical form to the electrical one, the bond-graph is a good tool to analyze this power flow. Although the bond-graph method can be used to calculate the dynamics of combining mechanical and electrical systems simultaneously, it has not been used for harvesting analysis. We demonstrate the usability and versatility of bond-graph for not only steady analysis but also transient analysis of harvesting.

• 한국추진공학회지
• /
• 제7권1호
• /
• pp.10-17
• /
• 2003

액체 로켓의 추진제탱크 가압을 위해 사용되는 극저온 액체헬륨의 정상상태 및 천이상태 열유동 해석을 수치적으로 수행하였다 벽면에서의 단열 및 비단열 조건에 대한 정상 해석을 통하여 설계유량 및 설계유속을 만족시키는 헬륨 배관의 내경 및 압력손실, 온도변화 등을 조사하였으며 특히 단열조건에서도 헬륨의 온도는 주울-톰슨계수의 영향에 의해 증가하는 경향이 있음을 밝혀내었다. 그리고 국부적인 열유입 있을 경우에의 관내 헬륨의 온도 및 압력의 시간적 변화를 천이해석을 통하여 고찰하였으며 열유입부의 밀도 감소에 의한 열유입부 후단부의 속도 증가량을 예측하였다.

• 한국추진공학회지
• /
• 제15권6호
• /
• pp.63-69
• /
• 2011

스마트 무인기의 엔진은 터보 축 엔진이지만 추진계통 제어는 회전익 항공기와 고정익 항공기에 필요한 특성을 모두 가져야 한다. 향후 전자식 엔진제어기를 개발하기 위해서는 틸트 로터 항공기의 엔진 운용 경험과 데이터를 축적할 필요가 있다. 이를 위해 정상상태 및 천이 상태에서의 엔진성능을 예측할 수 있는 프로그램을 활용하여 비행시험 데이터를 보완할 수 있다. 본 연구에서는 비행시험으로부터 수집한 엔진성능 데이터를 이용하여 동적 거동 해석 프로그램을 개발하고, 비행시험 결과 및 정상상태 엔진성능예측 프로그램으로 계산한 결과와 비교하여 프로그램의 정확도를 검증하였다.