• 생명과학회지
• /
• 제26권10호
• /
• pp.1169-1181
• /
• 2016

본 연구는 바른체형운동 프로그램이 정신장애인의 폐활량 및 우울감에 미치는 영향을 알아보고자 경북 P시에 거주하고 정신장애 판정을 받았으며 정신재활프로그램에 참여하는 정신장애인을 대상으로 실시하였다. 참여한 피험자에게 연구목적과 내용을 설명하였고, 연구 참가동의서를 받은 19명을 최종 선정하여 10명은 운동군, 9명은 통제군으로 분류하여 12주간 바른체형운동 프로그램을 실시하였고, 연구결과는 다음과 같다. 우선 폐활량의 변화를 살펴본 결과 PEF (최대호기속도)와 FEV1/FVC (1초간 노력성 호기량의 노력성 폐활량에 대한 비)가 바른체형운동 적용 후에 증가하여 호기기능이 유의하게 향상됨을 확인하였다. 또한, 바른체형운동 프로그램 참여에 따른 운동군의 우울감의 변화는 통계적으로 유의한 차이는 나타나지 않았으나 우울정도의 감소폭이 통제군보다 운동군에서 훨씬 크게 나타나 바른체형운동이 정신장애인의 우울감 정도의 감소에 긍정적인 변화를 나타냈다고 할 수 있다. 그리고 본 연구에서는 프로그램 참가자들의 특수성으로 인한 표본 수의 한계로 인해 통계적 검증의 한계가 명확히 존재함을 고려하여 참여자들의 주관적 경험을 심층적으로 이해하는 것을 목적으로 한 질적분석(qualitative research)을 병행하여 실시하였다. 프로그램 참가자 중 동의하는 사람에 한해 심층적 면담을 실시하였으며 이를 통해 참여자들이 표현하는 내용의 의미단위를 검토하여 분류하고 세분화하는 작업을 통해 주제분석(thematic analysis)을 실시한 결과, 전반적으로 바른체형운동 프로그램에 참여한 정신장애인들의 우울감 정도가 줄어든 것을 알 수 있었다. 우울감의 변화과정은 ′변화의 시작′, ′프로그램에 대한 흥미′, ′신체적 건강의 필요성에 대한 인식′, ′신체적 건강증진′, ′신체적 기능의 회복′, ′부정적인 습관(자세)의 변화′, ′우울감의 감소′, ′할 수 있다는 자신감′, ′미래에 대한 희망′과 같은 3개의 주제와 6개의 하위 주제로 나타났다. 따라서 바른체형운동이 정신장애인들의 신체적 건강증진을 위해 심폐지구력을 높여 신체적 건강증진을 도모할 뿐 아니라 더 나아가 정신적 우울감의 감소에도 효과성을 높여 정신적 건강증진에도 도움을 줄 수 있는 프로그램으로 정신장애인의 삶의 질 증진을 위해서는 보급이 반드시 필요할 것으로 사료된다.

• 생명과학회지
• /
• 제21권1호
• /
• pp.1-8
• /
• 2011

본 연구는 남녀 노인을 대상으로 12주간의 트레이닝을 실시한 후, 대요근과 대퇴부 근육의 근 횡단면적의 변화를 검토하였다. 연구 대상자는 65세에서 80세까지의 노인 58명(남성 30명, 여성 28명)이었으며, 대조군 19명과 운동군 39명으로 나누어 실시하였다. 측정항목은 신장, 체중, 체질량, 대요근과 대퇴부의 근 횡단면적을 측정하였다. 근육의 평가는 자기공명영상법(MRI)을 사용하여 실험 전, 후 실시하였다. 운동군은 대요근과 대퇴부 근육을 증가시키기 위하여 특별히 고안된 기계를 사용하여 평균 주 2일, 12주 동안 23번의 트레이닝을 실시하였다. 대요근의 측정부위는 L4와 L5의 중간부위를 분석하고, 대퇴부는 대퇴골과 무릎까지 길이를 나누어 50%부위에서 분석하였다. 트레이닝 후, 운동군의 대요근 근횡단면적은 9.4% 증가하였다(남성 11.5%, 여성 8.4%). 그러나 대퇴부 근 횡단면적은 남녀 모두 운동 후 증가경향은 나타나지 않았다. 또한 같은 기간 대조군의 근 횡단면적에서도 유의한 변화는 나타나지 않았다. 대요근은 자세 유지와 허리, 골반 및 대퇴부의 연결에 중요한 역할을 담당하기 때문에, 특히 노인의 이동활동에 중요하다고 사료된다. 본 연구에서는 새로이 개발된 트레이닝 기계를 사용하여 단기간트레이닝 후, 대요근 근 횡단면적의 증가를 확인하였으며, 이것은 노인들의 근력 및 이동능력의 향상 가능성이 시사되었다.

• 여성건강간호학회지
• /
• 제6권1호
• /
• pp.142-152
• /
• 2000

This study is a descriptive study to offer an actual basic data as Nursing intervention strategy of nurses before delivery in order that pregnant women in Korea may effectively practice Taekyo by examining the relation after apprehending level of recognition and practice of our pregnant women about Taekyo. This study collected questionnaires from 801 pregnant women who visited general hospitals in 10 areas(Seoul, Daejon, chunan, Daegu, Kummi, $Ky{\check{o}}ngju$, $P{\ddot{o}}hang$, Busan, $J{\ddot{o}}nju$, and $Y{\ddot{o}}nkwang$) for prenatal care through an outpatient obstetrics and gynecology from July 15 to August 30, 1999. This study used the tool of lee, Ki Young(1993) revised an complemented by investigator to measure recognition of Taekyo and the tool of Jang, Shun Buk and Park, Young Ju(1996) revised and complemented by investigator to measure practice of Taekyo. The Cronbach's alpha value of each tool was .88 in recognition of Taekyo, while the value was .90 in practice of Taekyo. For data analysis, this study used the descriptive and statistical analysis, Pearson correlation, t-test, ANOVA, Tukey's post hoc contrast, and Stepwise multiple regression in accordance with the purpose of this study with using SPSS Win 7.5 program. The results were as follows ; 1. The practice of Taekyo was low in comparison with recognition of Teakyo by showing average 4.28 points and standard deviation 0.48 at level of recognition of pregnant women about Taekyo on the basis of 5 points and showing to show average 2.81 points and standard deviation 0.36 at practice level on the basis of 4 points. 2. They showed the higher level of recognition on Taekyo at high educational background of pregnant woman(F=3.735, p=.005), Roman catholicism (F=4.570, p=.002), satisfied married life(F=5.448, p=.004), high monthly income(F=6.096, p=.000) and cases of hoping pregnancy(F=2.525, p=.012). 3. They showed the higher level of practice on Taekyo at high educational background of pregnant woman(F=2.883, P=.022), Roman catholicism(F=3.616, p=.032), satisfied married life(F=19.924, p=.000), good health condition(F=2.386, p=.017), cases of hoping pregnancy(F=0.677, p=.000), cases of planning pregnancy with husband(F=3.024, p=.001), cases of regular prenatal care before delivery(F=0.241, p=.005), cases of maternal breast feeding (F=9.132, p=.000), and the number of less children(F=2.763, p=.041). 4. In result of examining correlation between recognition and practice of Taekyo, they showed high level of practice on Taekyo under high level of recognition of pregnant women on Taekyo by showing the statistically significant correlation. 5. In result of examining the related factors that affect recognition and practice of Taekyo y the object, practice of Taekyo had 16.8 percents of explanatory range, purpose of practicing Taekyo 8.5 percents of explanatory range, and monthly income 1.9 percent of explanatory range as variables of affecting recognition of Taekyo. The total explanatory range was 27.2 percents, Recognition of Taekyo had 16.1 percents of explanatory ragne, time of starting Taekyo 3.2 percents, health condition 2.2 percents of explanatory range, condition of hoping pregnancy 1.1 percent of explanatory range, satisfaction of married life 0.8 percent of explanatory range, and religion 0.6 percent of explanatory range as variables of affecting practice of Taekyo. The total explanatory range was 24.0 percents.

• 한국환경보건학회지
• /
• 제33권2호
• /
• pp.123-131
• /
• 2007

Many environmental contaminants including several metals, polycyclic aromatic hydrocarbons, and pharmaceuticals, have been identified to be phototoxic in the water environment. Concerns regarding photo-enhancement of toxicity of several environmental contaminants have been increasing because of the increased level of ultraviolet irradiation on the earth surface. However, there exist arguments that there might be certain defense mechanisms taking place in the aquatic ecosystem, which may include behavioral characteristics or genetic acclimation. This study was conducted to understand the potential responses of aquatic receptors to several phototoxic metals in the real environment, where long-term acclimation of such organisms to low dose UV-B may take place. For this purpose, water flea Daphnia magna was acclimated to environmentally relevant dose of UV-B (12 to $18uW/cm^2$) for >11 generations. The differences in developmental and life history characteristics, and toxicity responses were evaluated. Acclimation did not affect the daphnids' growth, longevity, and reproduction characteristics such as time to first brood, and brood size: After 21 d, survival of D. magna was not influenced by UV-B acclimation. When the number of young per female was compared. the daphnids acclimated for 11 generations tend to produce less number of neonates than the un-acclimated individuals but with no statistical significance (p>0.05). Four metals that were reported to be phototoxic elsewhere were employed in this evaluation, that include As, Cd. Cu, and Ni. UV-B level being applied in acclimation did increase the toxicity of Cd and Cu, significantly (p<0.05). However, the toxicities of As and Ni were not affected by irradiation of UV-B. Phototoxic responses were evaluated between the acclimated and the un-acclimated daphnids. For Cu, UV-B acclimation led to reduction of the photo-induced toxicity $(p\approx0.1)$ in daphnids. Non-acclimated Daphnia were affected by 50% at 4.18 ug/l Cu. but UV-B acclimated individuals exhibited $EC_{50}$ of 5.89 ug/l. With Cd, UV-B acclimation appeared to increase phototoxicity (p>0.05). With As and Ni, UV-B acclimation did not influence photo-induced toxicity. This observation may be in part explained by the type of reactive oxygen species that were generated by each metal. Similar to UV-B light, Cu is known to generate superoxide anion by acting as redox cycling toxicant. This is one of the first studies that employed_laboratory based UV-B acclimated test species for photoenhanced toxicity evaluation.

• 한국치위생학회지
• /
• 제11권6호
• /
• pp.881-891
• /
• 2011

Objectives : This study was carried out in order to contribute to preventing dental caries, which is the biggest disease in adolescence and to promoting oral health by implanting a right habit on oral care targeting adolescents, and further to offer basic help to proceeding with making the better health life. Methods : This study carried out questionnaire survey targeting 1,100 students of middle schools where are located in small and medium-sized cities of Gyeongnam from March 7-18, 2011. Statistical processing was performed frequency analysis and cross tabulation, by using SPSSWIN 12.0 program. Results : As for middle school students' oral health education experience, the group with educational experience was indicated to be 52.9% for girl students and 47.1% for boy students(p<.05) in case of gender. Toothbrushing time was indicated to be the highest with 25.6% in 'after having breakfast'. The appearance of toothbrushing after having lunch at school was indicated to be 53.3% for girl students and 26.3% for boy students(p<.001) by gender. The most important reason for toothbrushing accounted for 82.1% in the 1st grade, 71.1% in the 2nd grade, and 67.4% in the 3rd grade depending on school year as for the response as saying of 'aiming to prevent decayed tooth and gum disease.' Thus, the lower school year led to having indicated to be higher in response as saying of brushing teeth for preventing decayed tooth and gum disease(p<.001). As for a toothbrushing method by gender, boy students accounted for 24.2% in response as saying of 'brushing teeth freely', thereby having been indicated to be higher than 15.0% for girl students(p<.001). Conclusions : In order for toothbrushing method to be rightly practiced and habituated continuously, there will be a need of changing adolescents' awareness and of being driven systematically and continuously through oral health education. School oral health education, which can nurture right attitude and habit of oral health care, is thought to be necessarily expanded and executed.

• Asian Journal of Atmospheric Environment
• /
• 제8권3호
• /
• pp.162-174
• /
• 2014

An abnormal decrease in ozonesonde sensor signal occurred during air-pollution study campaigns in November 2011 and March 2012 in Mexico City Metropolitan Area (MCMA). Sharp drops in sensor signal around 5 km above sea level and above were observed in November 2011, and a reduction of signal over a broad range of altitude was observed in the convective boundary layer in March 2012. Circumstantial evidence indicated that $SO_2$ gas interfered with the electrochemical concentration cell (ECC) ozone sensors in the ozonesonde and that this interference was the cause of the reduced sensor signal output. The sharp drops in November 2011 were attributed to the $SO_2$ plume from Popocat$\acute{e}$petl volcano southeast of MCMA. Experiments on the response of the ECC sensor to representative atmospheric trace gases showed that only $SO_2$ could cause the observed abrupt drops in sensor signal. The vertical profile of the plume reproduced by a Lagrangian particle diffusion simulation supported this finding. A near-ground reduction in the sensor signal in March 2012 was attributed to an $SO_2$ plume from the Tula industrial complex north-west of MCMA. Before and at the time of ozonesonde launch, intermittent high $SO_2$ concentrations were recorded at ground-level monitoring stations north of MCMA. The difference between the $O_3$ concentration measured by the ozonesonde and that recorded by a UV-based $O_3$ monitor was consistent with the $SO_2$ concentration recorded by a UV-based monitor on the ground. The vertical profiles of the plumes estimated by Lagrangian particle diffusion simulation agreed fairly well with the observed profile. Statistical analysis of the wind field in MCMA revealed that the effect Popocat$\acute{e}$petl was most likely to have occurred from June to October, whereas the effect of the industries north of MCMA, including the Tula complex, was predicted to occur throughout the year.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.72-78
• /
• 2015

According to the report of the WHO, workers have been exposed to much job strain such as job load, responsibility, role, interpersonal conflict etc. In Korea, studies on job strain started to become active from 1990s and now hundreds of studies are actively under going or publishing so that the studies are contributing to development and improvement of job strain. Representative measurement models of job strain are Job Strain Model of Karasek, Job Stress Model of NOISH, Korea Occupational Stress Scale, JSQ(Job Stress Questionnaire), K-OSI(Korea Version of Occupational Stress Inventory) etc. (Lee Kwan-Suk, 2012 ; KOSHA, 2003). Among them, Job Strain Model of Karasek had been loved by many researchers of job strain before Korea Occupational Stress Scale was developed. Job Strain Model of Karasek had been fitted to Korean style and then, used to analyze job strain of Korean people so that this Scale highly contributed to seeking relationship with cardiovascular disease, musculoskeletal disease caused by job, smoking, drug, alcohol poisoning, and pulse(Lee Kwan-Suk, 2012). But as this Model was studied and developed based on foreign culture and life pattern, a model fit to Korea was developed to measure job strain for Korean people, which is Korea Occupational Stress Scale now most frequently used in measuring job strain. Accordingly, after this study made questionnaire survey about same population using the two methods used most frequently in measuring job strain, the study investigated what features appeared, what correlations appear between two models, and comparatively analyzed characteristics each independent and dependent variable. Based on this, the study aimed to exactly express job strain of Korean people. The subjects of the study were a population of 233, and Karasek's Questionnaire and KOSS's Questionnaire were surveyed at the same time. The results were analyzed by statistical program to obtain significant difference between two models. Four particular groups were divided with Job Strain Model of Karasek and the four particular groups were measured with Korea Occupational Stress Scale. And job strain come from combination of two models was measured, with which new comparative analysis method was suggested.

• 한국잡초학회지
• /
• 제17권2호
• /
• pp.139-146
• /
• 1997

벼 직파재배답(直播栽培畓)의 효과적인 방제체계(除草體系)를 확립(確立)하기 위한 기초자료(基礎資料)를 얻고자 직파재배유형별(直播栽培類型別) 잡초발생생태(雜草發生生態)를 구명(究明)하기 위하여 수행한 시험결과를 요약하면 다음과 같다. 1. 건답직파재배답(乾畓直播栽培畓)에서는 생육초기(生育初期)에 피 바랭이 냉이 강아지풀 등 밭잡초의 발생이 많았으나 생육이 진전됨에 따라 올방개 사마귀풀 너도방동사니 등이 우점(優占)하였고, 담수직파(湛水直播)에서는 건답직파(乾畓直播)에 비하여 피의 우점도(優占度)가 낮았으며 물달개비와 사마귀풀이 우점(優占)하였다. 2. 잡초발생량(雜草發生量)은 건답직파(乾畓直播)가 담수직파(湛水直播)에 비해 1.8~2.4배 많았으며, 파종시기(播種時期)가 늦을수록 증가하였고, 단위기간당(單位期間當) 잡초발생량(雜草發生量)의 증가율(增加率)은 직파유형(直播類型)이나 파종시기(播種時期)에 관계없이 파종후 20일에서 40일 사이에 가장 높았는데, 파종시기(播種時期)가 늦어질수록 증가율(增加率)이 낮아졌다. 3. 일년생잡초(一年生雜草)의 발생비율은 건답직파(乾畓直播)보다 담수직파(湛水直播)에서 높은 반면 다년생잡초(多年生雜草)는 담수직파(湛水直播)에서 발생이 많았고, 파종시기(播種時期)가 늦어질수록 일년생잡초(一年生雜草)의 발생은 감소하고 다년생잡초(多年生雜草)는 증가(增加)하였다. 4. 잡초발생(雜草發生)의 Simpson지수(指數)는 건답직파(乾畓直播)가 담수직파(湛水直播)에 비하여 높았으며, 생육시기 별로는 초기에 비하여 생육이 진전될수록 특정초종(特定草種)의 우점(優占)으로 점차 높아졌다. 5. 잡초발생량(雜草發生量)은 직파유형간(直播類型間)에 통계적인 차이가 있었고, 파종시기(播種時期)에 의해서도 유의성이 인정되었으며, 직파유형과 파종시기간에는 교호작용(交互作用)의 효과(效果)가 있었다.

• 벤처창업연구
• /
• 제13권1호
• /
• pp.119-129
• /
• 2018

어느 때보다도 불확실해진 시장환경과 더욱더 복잡해지는 소비자의 요구는 신제품 개발의 중요성을 증대시키고 있다. 하지만, 점차 좁아지는 기술격차와 빨라지는 제품의 수명주기는 기업들로 하여금 외부조직과 연합을 통해 부족한 지식을 보완하는 현상을 가져왔다. 그러나 이러한 현상은 다른 조직과 지식의 교환과 조합이란 새로운 문제를 부각시키게 되었다. 신제품을 개발하기 위한 지식의 교환과 조합을 통해 가치있는 지식을 만들기 위해서는 지식 수령자의 흡수역량이 중요하게 고려되어야 하지만, 동시에 지식 전달자의 특징인 지식보호성향도 놓쳐서는 안된다. 하지만 이러한 요소를 동시에 고려한 연구는 매우 제한적이었다. 본 연구는 신제품 공동개발 과정에서 공급자의 흡수역량과 구매자의 지식보호성향이 신제품 개발성과에 어떠한 영향을 미치는지 알아보았다. 더불어 공급자의 흡수역량과 구매자의 지식보호성향의 상호작용효과에 대해서도 연구하였다. 이를 위해 신제품 공동개발이 자주 발생하는 자동차산업, 전자산업, 방위산업을 대상으로 자료를 수집하였으며 조절회귀분석으로 통계적 검증을 실시하였다. 연구결과 공급자의 흡수역량은 신제품 개발성과와 긍정정 관계가 있었으며, 구매자의 지식보호성향은 신제품 개발성과와 부정적 관계가 있는 것으로 밝혀졌다. 아울러 공급자의 흡수역량과 구매자의 지식보호성향이 신제품 개발결과에 상호작용 효과를 갖는 것으로 나타났다. 이러한 결과는 신제품 공동개발 시 공급자의 흡수역량이 중요한 요소로 작용하지만, 우수한 흡수역량을 가진 공급자라도 구매자가 지식 전달에 부정적인 자세를 가질 경우 신제품 개발성과에 부정적 영향을 미칠 수 있음을 시사한다.

• Steel and Composite Structures
• /
• 제34권5호
• /
• pp.681-698
• /
• 2020

The paper addresses contribution to the modeling and optimization of major machinability parameters (cutting force, surface roughness, and tool wear) in finish dry hard turning (FDHT) for machinability evaluation of hardened AISI grade die steel D₃ with PVD-TiN coated (Al₂O₃-TiCN) mixed ceramic tool insert. The turning trials are performed based on Taguchi's L₁₈ orthogonal array design of experiments for the development of regression model as well as adequate model prediction by considering tool approach angle, nose radius, cutting speed, feed rate, and depth of cut as major machining parameters. The models or correlations are developed by employing multiple regression analysis (MRA). In addition, statistical technique (response surface methodology) followed by computational approaches (genetic algorithm and particle swarm optimization) have been employed for multiple response optimization. Thereafter, the effectiveness of proposed three (RSM, GA, PSO) optimization techniques are evaluated by confirmation test and subsequently the best optimization results have been used for estimation of energy consumption which includes savings of carbon footprint towards green machining and for tool life estimation followed by cost analysis to justify the economic feasibility of PVD-TiN coated Al₂O₃+TiCN mixed ceramic tool in FDHT operation. Finally, estimation of energy savings, economic analysis, and sustainability assessment are performed by employing carbon footprint analysis, Gilbert approach, and Pugh matrix, respectively. Novelty aspects, the present work: (i) contributes to practical industrial application of finish hard turning for the shaft and die makers to select the optimum cutting conditions in a range of hardness of 45-60 HRC, (ii) demonstrates the replacement of expensive, time-consuming conventional cylindrical grinding process and proposes the alternative of costlier CBN tool by utilizing ceramic tool in hard turning processes considering technological, economical and ecological aspects, which are helpful and efficient from industrial point of view, (iii) provides environment friendliness, cleaner production for machining of hardened steels, (iv) helps to improve the desirable machinability characteristics, and (v) serves as a knowledge for the development of a common language for sustainable manufacturing in both research field and industrial practice.