• 자연과학논문집
• /
• 제5권2호
• /
• pp.25-32
• /
• 1992

통계 데이타 베이스는 데이타가 단순한 통계치일 뿐만 아니라, 일반적인 통계처리에서 필요한 통계 분석을 위해 주로 사용되는 대량의 데이타 베이스를 말한다. 통계 데이타 베이스를 관리하기 위해 기존의 범용 데이타 베이스 관리 시스템을 그대로 이용하기에는 데이타 저장과 액세스의 비효율성, 사용의 편이성의 부족과 질의어 등의 부족으로 인해 사용자의 요구를 충족시키지 못해, 새로운 관리 방법의 필요성이 요구되어 왔다. 독자적 개발에 의한 새로운 소프트웨어로써 통계 데이타 베이스를 관리할 때의 실제 이용하기 어려운 현실적 제고를 고려하여, 이 논문에서는 관계형 데이타 베이스 시스템에의 전위 시스템인 SM-F 시스템을 설계하여, 이를 이용하여 통계 데이타 베이스를 관리하는 방법을 제시하였다. 이 시스템은 통계 데이타 베이스의 효율을 고려한 시멘틱 모델인 GROS 모델을 사용하며 통계분석을 지원하고 통계 요약 정보를 제공하기 위해, 메타 데이타 베이스와 요약 데이타 베이스를 저장하고 운영한다.

• 대한조선학회지
• /
• 제26권4호
• /
• pp.14-26
• /
• 1989

선박의 추진성능 추정을 위한 통계해석 기법을 연구하고 전산 프로그램을 만들었다. 조파저항계수의 추정식은 조파저항이론을 이용하여 스테이션 별 횡단면적계수의 곱으로 표현되도록 도출해 내었고, 이에 대한 회귀계수는 모형시험 결과를 회귀분석하여 얻었다. 형상계수, 반류비 및 추력감소율의 추정식들은 선체 주요지수, 스테이션 별 횡단면적계수 및 모형시험 결과들을 순순하게 회귀분석하여 얻었다. 통계해석은 여러가지 기술통계와 단계별 회귀분석 기법을 적절하게 이용하여 수행하였다. 추진성능 추정 프로그램은 저항계수, 추진계수, 프로펠러 단독효율 및 각종 척도효과 등을 모두 쉽게 수용할 수 있도록 다양하면서도 간결하게 만들었다.

• Communications for Statistical Applications and Methods
• /
• 제18권4호
• /
• pp.445-455
• /
• 2011

표본추출에서 오분류된 이진자료는 흔히 발생될 수 있는 현실적인 문제이지만 통계적 방법론은 상대적으로 제한적이라고 할 수 있다. 특히, 모비율의 구간추정 문제는 고전적인 Wald 방법에 의존하고 있었다. 그러나 최근 이승천과 최병수 (2009)에서 Agresti-Coull 방법을 적용하고 새로운 구간추정 방법을 제시하였으며, 수치적인 방법에 의해 Agresti-Coull 신뢰구간의 효율성을 주장하였다. 본 연구에서는 오분류된 이진자료에 대한 베이지안 모형을 다루었으며, 베이지안 모형이 Agresti-Coull 신뢰구간의 이론적 배경이 될 수 있는지 살펴 보았다.

• Communications for Statistical Applications and Methods
• /
• 제23권1호
• /
• pp.1-20
• /
• 2016

Causal inference methodologies have been developed for the past decade to estimate the unconfounded effect of an exposure under several key assumptions. These assumptions include, but are not limited to, the stable unit treatment value assumption, the strong ignorability of treatment assignment assumption, and the assumption that propensity scores be bounded away from zero and one (the positivity assumption). Of these assumptions, the first two have received much attention in the literature. Yet the positivity assumption has been recently discussed in only a few papers. Propensity scores of zero or one are indicative of deterministic exposure so that causal effects cannot be defined for these subjects. Therefore, these subjects need to be removed because no comparable comparison groups can be found for such subjects. In this paper, using currently available causal inference methods, we evaluate the effect of arbitrary cutoffs in the distribution of propensity scores and the impact of those decisions on bias and efficiency. We propose a tree-based method that performs well in terms of bias reduction when the definition of positivity is based on a single confounder. This tree-based method can be easily implemented using the statistical software program, R. R code for the studies is available online.

• Communications for Statistical Applications and Methods
• /
• 제15권4호
• /
• pp.517-530
• /
• 2008

본 논문은 시간의 흐름에 따라 일정한 간격으로 관측된 시계열자료에 대한 통계적인 관계를 추정하기 위하여 삼각퍼지수를 이용한 퍼지시계열모형을 소개한다. 모든 관측치를 포함하는 전체집합을 분할하는 구간을 자료의 빈도수에 따라 결정하고 연속되는 두 시점에서 퍼지수가 일치하는 경우에는 관측된 자료의 차에 대한 정보를 이용하여 제안된 퍼지시계열모형을 추정한다. 예제를 이용하여 제안된 퍼지시계열모형의 정확성을 일반적인 시계열모형과 여러 가지 방법으로 추정된 퍼지시계열모형과 비교한다.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.27-37
• /
• 2005

Direct writing technology on the silicon wafer surface is used to reduce the size of the chip as the miniature trend in electronic circuit. In order to improve the productivity and efficiency, the real time quality estimation is very important in each semiconductor process. In laser marking, marking quality is determined by readability which is dependant on the contrast of surface, the line width, and the melting depth. Many researchers have tried to find theoretical and numerical estimation models fur groove geometry. However, these models are limited to be applied to the real system. In this study, the estimation system for the line width during the laser marking was proposed by process monitoring method. The light intensity emitted by plasma which is produced when irradiating the laser to the silicon wafer was measured using the optical sensor. Because the laser marking is too fast to measure with external sensor, we build up the coaxial monitoring system. Analysis for the correlation between the acquired signals and the line width according to the change of laser power was carried out. Also, we developed the models enabling the estimation of line width of the laser marking through the statistical regression models and may see that their estimating performances were excellent.

• 한방재활의학과학회지
• /
• 제19권4호
• /
• pp.127-134
• /
• 2009

Objectives : The purpose of this study is to investigate the clinical effects of heating-conduction acupuncture therapy on anterior talofibular ligament injury induced by acute ankle sprain. Methods : From October 31, 2008 to July 21, 2009, the 11 outpatients who had admitted to department of oriental rehabilitation medicine, Dae-Jeon oriental medicine hospital, Dae-Jeon university with acute ankle sprain were performed heating-conduction acupuncture therapy on anterior talofibular ligament injury. To evaluate the efficiency of heating-conduction acupuncture therapy, pain threshold with Pressure algometer and visual analogue scale(VAS) were applied before treatment and after 1st, 2nd treatment. Results : 1. The pain threshold score and the VAS score showed statistical significant improvement after 1st treatment. 2. The pain threshold score and the VAS score showed improvement but had no statistical significance after 2nd treatment. 3. The difference between left and right were not statistical significant in pain threshold score and VAS score. Conclusions : Heating-conduction acupuncture therapy has clinical effects of pain reduction on patient with anterior talofibular ligament injury induced by acute ankle sprain.

• International Journal of Quality Innovation
• /
• 제3권2호
• /
• pp.13-28
• /
• 2002

Higher efficiency and effectiveness of Research & Development phases can be attained using advanced statistical methodologies. In this work statistical methodologies are combined with a deterministic approach to engineering design. In order to show the potentiality of such integration, a simple but effective example is presented. It concerns the problem of optimising the performances of a paper helicopter. The design of this simple device is not new in quality engineering literature and has been mainly used for educational purposes. Taking full advantage of fundamental engineering knowledge, an aerodynamic model is originally formulated in order to describe the flight of the helicopter. Screening experiments were necessary to get first estimates of model parameters. Subsequently, deterministic evaluations based on this model were necessary to set up further experimental phases needed to search (or a better design. Thanks to this integration of statistical and deterministic phases, a significant performance improvement is obtained. Moreover, the engineering knowledge かms out to be developed since an explanation of the “why” of better performances, although approximate, is achieved. The final design solution is robust in a broader sense, being both validated by experimental evidence and closely examined by engineering knowledge.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권5호
• /
• pp.2124-2141
• /
• 2018

Recent studies have revealed the efficacy of incorporating delayed channel state information at transmit side (CSIT) in transmission scheme design. This paper focuses on transmit precoder design to maximize the ergodic sum-rate in a two-user Multiple-Input Single-Output (MISO) system with delayed and statistical CSIT. A new transmit strategy which precodes signals in all transmit slots is proposed in this paper, denoted as all time-slots precoding Alternative MAT (AAMAT). There is a common procedure in conventional delayed-CSIT based schemes, which is retransmitting the overheard interferences. Since the retransmitting signal is intended to both users, all previous schemes tend to use only one antenna. We however figure out an improvement in spectral efficiency could be realized if all antennas can be utilized. In this paper, we detail the design of the procoder which enabling all antennas and also we compute a lower bound of the ergodic sum-rate in an ideal condition. In addition, simulation results demonstrate the superiority of our proposed scheme.

• Geomechanics and Engineering
• /
• 제32권5호
• /
• pp.503-512
• /
• 2023

In tunneling projects, a significant part of the costs is spent on segment production. By more economically producing, the cost of tunnel construction can be greatly reduced, especially in long and large-diameter tunnels. In the present study, the effect of using the Carousel method in the improvement of the production system performance compared to the conventional Static system has been studied. To carry out the research, a quantitative comparison of cost and production time was carried out for two production methods using the available documentation. The opinions of experts have been obtained using questionnaires and qualitative comparison of cost, time and production quality was done by implementation of statistical analysis. The SPSS software and the univariate t-test were used to analyze the questionnaires. According to the results of statistical analysis with SPSS, the use of the Carousel method will reduce production time and costs along with increasing manufacturing quality. According to the documentation analysis, the Carousel method reduces the cost of production by almost 30% and leads to a reduction of the production time to approximately 40% of the Static moulds system. The Carousel method has a higher production rate, efficiency, and better performance. Research into quantifying the benefits of Carousel method in the production system performance is very limited. This comparison is based on real information from the under construction Tabriz Metro project. This article can be very helpful in choosing the best production method.