• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.687-692
• /
• 2015

A mold design for in-mold coating was developed to achieve simultaneous coating and injection molding of an automotive armrest. The developed mold includes one core and two cavities which are composed of a substrate cavity and a coating cavity. The core was attached to a movable plate and two cavities were mounted on a plate sliding in a stationary plate. In a two-step process, the part was first injection molded and subsequently, with the aid of a sliding table, was transferred to a second cavity. The materials used were PC/ABS for substrate and two-component polyurethane for coating. The experiments were conducted by changing the flow rate to investigate mixing characteristics. As the flow rate increased, the mixing improved. Additionally, the bubbles appeared over the substrate surface decreased with an increase of the weight of injected coating material.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.4
• /
• pp.27-31
• /
• 2004

This paper describes the development and fabrication of a high temperature superconducting motor which consists of HTS rotor and air-core stator. The machine was designed for the rated power of 100hp at 1800 rpm. The HTS field windings are composed of the double-pancake coils wound with AMSC's SUS-reinforced Bi-2223 tape conductor. These were assembled on the support structure and fixed by a bandage of glass-fiber composite. The cooling system is based on the heat transfer mechanism of the thermosyphon by using GM cryocooler as cooling source. The cold head is in contact with the condenser of a Ne-filled thermosyphon. The rotor assembly was tested independently at the stationary state and combined with stator. Characteristic parameters such as reactances, inductances, and time constants were determined to obtain a consistent overview of the machine operation properties. This motor has met all design parameters by demonstrating HTS field winding, cryogenic refrigeration systems and an air-core armature winding cooled with air. The HTS field winding could be cooled down below 30K. No-load test of open-circuit characteristics(OCC) and short-circuit characteristics(SCC) and load test with resistive load bank were conducted in generator mode. Maximum operating current of field winding at 30K was 120A. From OCC and SCC test results synchronous inductance and synchronous reactance were 2.4mH, 0.49pu, respectively. Efficiency of this HTS machine was 93.3% in full load(100hp) test. This paper will present design, construction, and basic experimental test results of the 100hp HTS machine.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.437-440
• /
• 2007

Recently embedded system developed a lot. Physically, embedded systems range from portable devices such as digital watches and MP3 players, to large stationary installations like traffic lights, factory controllers, or the systems controlling nuclear power plants. This paper focuses on implementation of portable device which is applicable to the child-kidnap or missing child prevention system in residential area or public area. To be specific, this device is to transmit video data which comes from the camera in the device into the host PC via WLAN. Embedded hardware platform consists of s3c2440 with ARM9 core, WindowsCE OS and other sensors. OS enables the platform to do multitasking jobs which are handling GPS data, taking video, capturing audio via microphone in the device and transfer all kind of realtime data to the host PC.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.66.1-66.1
• /
• 2016

We present our observational results of BL Lacertae(2200+420) obtained at 22, 43, 86, and 129 GHz simultaneously during 27 months(2013.Jan ~ 2015.Mar) which includes their two gamma-ray outbursts(2013.Oct & 2015.Mar) to study a connection between the gamma-ray outbursts and the radio activity. We mainly use a Korean VLBI monitoring program, IMOGABA(Interferometric Monitoring Of Gamma-ray Bright AGNs) which is a monthly monitoring program with the KVN(Korean VLBI Network). Overall, our KVN image shows two components in the map, a stationary core at the center and one moving jet component to the south, but almost core only at 86, 129 GHz. The location of the moving jet component in the maps depend on the frequencies that 22, 43, 86, and 129 GHz. We have checked light curves, spectral index, kinematics, and radio structure to find differences before and after the gamma-ray outbursts, but there was no significant correlation. We also have derived a decay time scale of ~9 months for the major radio outburst by applying an exponential decay fitting.

• Journal of Microbiology
• /
• v.45 no.6
• /
• pp.534-540
• /
• 2007

The Streptomyces coelicolor A3(2) genome contains six operons (rrnA to F) for ribosomal RNA synthesis. Transcription from rrnD occurs from four promoters (p1 to p4). We found that transcripts from the p1 and p3 promoters were most abundant in vivo in the early exponential phase. However, at later phases of exponential and stationary growth, transcripts from the p1 promoter decreased drastically, with the p3 and p4 transcripts constituting the major forms. Partially purified RNA polymerase supported transcription from the p3 and p4 promoters, whereas pure reconstituted RNA polymerase with core enzyme (E) and the major vegetative sigma factor ${\sigma}^{HrdB}$ ($E{\cdot}{\sigma}^{HrdB}$) did not. In order to assess any potential requirement for additional factor(s) that allow transcription from the p3 and p4 promoters, we fractionated a partially purified RNA polymerase preparation by denaturing gel filtration chromatography. We found that transcription from the p3 and p4 promoters required factor(s) of about 30-35 kDa in addition to RNAP holoenzyme ($E{\cdot}{\sigma}^{HrdB}$). Therefore, transcription from the p3 and p4 promoters, which contain a consensus -10 region but no -35 for ${\sigma}^{HrdB}$ recognition, are likely to be regulated by transcription factor(s) that modulate RNA polymerase holoenzyme activity in S. coelicolor.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.396-401
• /
• 2001

Heat transfer analysis of a iron core type linear motor for surface mounting device applications was considered in this study. In order to avoid the complex conjugate problem a fluid flow regime and a solid regime were considered separately. First, film coefficients of the moving parts were evaluated from computational fluid dynamic analysis and those of the stationary parts from the existing empirical or analytic correlations. And then, by applying them, internal and external temperatures of the linear motor pal1s were computed through finite element analysis. Both computation and measurement were carried out with respect to motor driving power. The measurement did not exhibit a linear temperature variation trend with respect to motor power while the computation revealed a linear correlation. Nonetheless, the computations agreed with the measurements within an error range of 20%. It indicates that an adequate heat transfer model for the reciprocative coil assembly may help more exact prediction.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.947-948
• /
• 2007

A superconducting synchronous motor with rotating field coil has been designed. This rotating field coil is composed of high-temperature superconducting(HTS) wire but the stationary armature windings are composed of conventional copper wire. In this paper a 5MW class synchronous motor with rotating HTS coil is designed. This motor is aimed to be utilized for ship propulsion so it has very low-speed. Firstly an air-cored type has been designed, which does not have any iron core both at the field and at the armature teeth. Secondly several iron-cored rotor types are considered to reduce expensive HTS wire cost.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.3 s.116
• /
• pp.59-78
• /
• 2006

Japan has been tried to integrate Western planning theories into its parks and green systems in the past. However this effect has been regarded unsuccessful. One of reasons for this is that the green systems have been treated as an urban facility, instead as systems. Another reason has to deal with greenbelt's stationary and reservation characteristics that make difficulty to respond timely to the rapid urbanization. The parks and green systems in Korea was introduced in 1990 and began to be promoted fully with the 'Parte and Green Master Plan' established in 2005. However, due to its short history, incomplete aspects exist in its philosophy and methods for promoting the system. Based on these experiences, the current green zone plans in Japan considers the green structure as an independent institution and amenity plan, not a tool of urban planning, that can be a medium for realization of urban visions. And main characteristics of this approach are 1) classifying the green structure into four categories in order to respond to urban forms and purposes, 2) pursuing confirmity with urban planning, and 3) executing the landscape plan based upon core green areas. From reviews upon experiences of Japan as well as considerations on demands and conditions of green systems in Korea, we proposed the following five new strategies for the construction of the urban parte and green system in Korea. They are 1) to develop urban parks and green systems into a genre of urban development improving the quality and local competitiveness of cities rather than a means of urban planning; 2) to form the integrated structure of urban green zones; 3) to transform the urban parte and green systems into practical systems as the centers of localities; 4) to raise criteria for planning and execution plans for effective implementations of the urban parte and green systems, and 5) to provide specific guidelines for the construction of urban parks and green systems through organizing research groups or specialists.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.251-258
• /
• 2005

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings (HDB) in an HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Reynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigen value problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.572-578
• /
• 2003

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings in a HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Raynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigenvalue problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.