• 한국전산구조공학회논문집
• /
• 제27권5호
• /
• pp.421-427
• /
• 2014

현실세계의 구조물은 대부분 동하중의 영향을 받고 있지만, 구조해석이나 구조 최적화를 수행할 때는 정하중이 작용하는 것으로 가정한다. 실제 하중인 동하중을 고려하게 되면 다양한 하중들을 고려해야 하기 때문에 전산자원과 시간비용 측면에서 많은 제약이 따르기 때문이다. 그러나, 단순한 정하중 조건만을 고려하면 구조안전성 측면에서 바람직하지 못하기 때문에 가중치를 적용하거나 동하중을 대체하는 등가정하중을 적용하여 관련 문제를 보완하려는 연구가 진행되어 왔다. 본 연구에서는 등가정하중을 적용하여 동하중을 받고 있는 구조물에 대한 구조최적화 기법을 제안한다. 본 연구에서 적용하는 등가정하중은 기존 연구에서 제안한 바 있는 주자유도를 기반으로 하여 등가정하중 부과 위치를 결정하고 최적화 과정을 통해 산출한다. 이 과정에서 지나치게 큰 하중이 구해지지 않도록 가중치를 고려한 구속조건을 추가하여 기존 연구의 등가정하중의 최적화 과정을 보완하였다. 수치예제에서는 동하중이 작용하는 트러스 구조물과 평판 구조물에서 최적화된 등가정하중을 적용하여 사이즈 최적화를 수행함으로써 제안된 최적화 기법의 신뢰성을 검증한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.443-448
• /
• 2000

In this paper, multiphase optimization of machine structure is presented. The goal of first step is to obtain (i) light weight, (ii) rigidity statically. In this step, multiple optimization problem with two objective functions is treated using Pareto Genetic Algorithm. Where two objective functions are weight of the structure, and static compliance. The method is applied to a new machine structure design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.108-113
• /
• 2002

This paper presents a multi-step structural design optimization method fur machine tool structures using a genetic algorithm with dynamic penalty. The first step is a sectional topology optimization, which is to determine the best sectional construction that minimize the structural weight and the compliance responses subjected to some constraints. The second step is a static design optimization, in which the weight and the static compliance response are minimized under some dimensional and safety constraints. The third step is a dynamic design optimization, where the weight static compliance, and dynamic compliance of the structure are minimized under the same constraints. The proposed design method was examined on the 10-bar truss problem of topology and sizing optimization. And the results showed that our solution is better than or just about the same as the best one of the previous researches. Furthermore, we applied this method to the topology and sizing optimization of a crossbeam slider for a high-speed machining center. The topology optimization result gives the best desirable cross-section shape whose weight was reduced by 38.8% than the original configuration. The subsequent static and dynamic design optimization reduced the weight, static and dynamic compliances by 5.7 %, 2.1% and 19.1% respectively from the topology-optimized model. The examples demonstrated the feasibility of the suggested design optimization method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.74-78
• /
• 2001

In this study, a multi-step optimization technique combined with a simple genetic algorithm is introduce to the structural design optimization of a high speed machining center. In this case, the design problem is to find out the best design variables which minimize the static compliance, the dynamic compliance, and the weight of the machine structure and meet some design constraints simultaneously. Dimensional thicknesses of the thirteen structural members along the static force loop of the machine structure are adopted as design variables. The first optimization step is a static design optimization, in which the static compliance and the weight are minimized under some dimensional and safety constraints. The second step is a dynamic design optimization, where the dynamic compliance and the weight are minimized under the same constraints. After optimization, the weight of the moving body was reduced to 9.1% of the initial design respectively. Both static and dynamic compliances of the optimum design are also in the feasible range even thought they were slightly increased than before.

• Structural Engineering and Mechanics
• /
• 제39권6호
• /
• pp.751-765
• /
• 2011

The present paper deals with the identification of a concentrated damage in an elastic parabolic arch through the minimization of an objective function which measures the differences between numerical and experimental values of static displacements. The damage consists in a notch that reduces the height of the cross section at a given abscissa and therefore causes a variation in the flexural stiffness of the structure. The analytical values of static displacements due to applied loads are calculated by means of the principle of virtual work for both the undamaged and damaged arch. First, pseudo-experimental data are used to study the inverse problem and investigate whether a unique solution can occur or not. Various damage intensities are considered to assess the reliability of the identification procedure. Then, the identification procedure is applied to an experimental case, where displacements are measured on a prototype arch. The identified values of damage parameters, i.e., location and intensity, are compared to those obtained by means of a dynamic identification technique performed on the same structure.

• Architectural research
• /
• 제18권1호
• /
• pp.39-47
• /
• 2016

A finite element analysis technology applicable to the prediction of the static nonlinear response of cable roof structure is presented. The unified kinematic description is employed to formulate the present cable element and different strain definitions such as Green-Lagrange strain, Biot strain and Hencky strain can be adopted. The Newton-Raphson method is used to trace the nonlinear load-displacement path. In the iteration process, the compressive stress of a cable element is not allowed. For the verification of the present cable element, four numerical examples are tackled. Finally, numerical results obtained by using the present cable element are provided as new benchmark test results for cable structures under static loads.

• ETRI Journal
• /
• 제35권1호
• /
• pp.109-119
• /
• 2013

Static testing of analog-to-digital (A/D) and digital-to-analog (D/A) converters becomes more difficult when they are embedded in a system on chip. Built-in self-test (BIST) reduces the need for external support for testing. This paper proposes a new static BIST structure for testing both A/D and D/A converters. By sharing test circuitry, the proposed BIST reduces the hardware overhead. Furthermore, test time can also be reduced using the simultaneous test strategy of the proposed BIST. The proposed method can be applied in various A/D and D/A converter resolutions and analog signal swing ranges. Simulation results are presented to validate the proposed method by showing how linearity errors are detected in different situations.

• Structural Engineering and Mechanics
• /
• 제45권4호
• /
• pp.521-542
• /
• 2013

In this study a truss model is used for the geometrically nonlinear static and dynamic analysis of a thin shallow arch subject to snap-through. Thanks to the very simple geometry of a truss, the equilibrium conditions can be easily written and the global stiffness matrix can be easily updated with respect to the deformed structure, within each step of the analysis. A very coarse discretization is applied; so, in a very simple way, the high frequency modes are suppressed from the beginning and there is no need to develop a complicated reduced-order technique. Two short computer programs have been developed for the geometrically nonlinear static analysis by displacement control of a plane truss model of a structure as well as for its dynamic analysis by the step-by-step time integration algorithm of trapezoidal rule, combined with a predictor-corrector technique. These two short, fully documented computer programs are applied on the geometrically nonlinear static and dynamic analysis of a specific thin shallow arch subject to snap-through.

• 한국전기전자재료학회논문지
• /
• 제30권7호
• /
• pp.423-426
• /
• 2017

The designing approaches with consideration offabrication process technologies for high-frequency, high-powered, silicon-based static induction thyristors (SITH) are presented. The effects of doping concentration and thickness on the I-V characteristics and power performance of the devices are discussed. The dependence of SITH switching performances on material, geometric structure, and technological parameters isexamined by using two-dimensional simulations. Thick-epitaxy technology is found to be one of the most critical steps in realizing the proposed structure and switching times, $t_{off}$, of SITH, which may be reduced to below ${\sim}0.26{\mu}s$ for the proposed 1,700 V SITH devicesafter optimization.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1103-1108
• /
• 2009

This paper describes the results of structural test and finite element analysis for rubber wheel-type Automatic Guideway Transit(AGT) made of aluminum honeycomb sandwich composites with WR580/NF4000 glass-fabric epoxy laminate face sheets. The static tests of vehicle structure were conducted according to JIS E7l05. These static tests have been done under vertical load, compressive load and 3-point support load. The structural integrity of AGT vehicle structure was evaluated by displacement, stress obtained from LVDT and strain gauges, and natural frequency. And finite element analysis using Ansys v11.0 was done to compare with the results of static test. The result showed that the results of structural integrity for static test were in an good agreement with these of finite element analysis.