• 한국조경학회지
• /
• 제33권1호
• /
• pp.33-48
• /
• 2005

The purpose of this study was to discover the landscape visual image of the slope scene and their harmony with surrounding sceneries. This research utilized the basic study tool of psycho-physics and processed the case study of ten types of slope construction scene along the highway. The analysis was performed by the data obtained from the questionnaires and the photos for the slope construction scene. The questionnaires for analysis the image of the slope construction scene and their harmony with surrounding sceneries were designed using semantic differential scale and 5 point Likert-scale. The major findings were as follows. 1. At the part of the visual preferences analysis, the slope revegetation methods showed high level of preferences generally than on the slope structure methods. While the slope revegetation methods were estimated friendly, continuity, harmonious, soft, light and wide, the slope revegetation methods were estimated unstable, female, static, simple, omnipresent, appeared as policeman of weak inclination. Also the slope structure methods were estimated stable, manly, complicated, steep and healthy but rough, unharmonious, unfamiliar and heavy. 2. Psychological factors, related to the satisfaction for the slope revegetation methods were composed of three factors, aesthetic, individuality and physical character. And the slope structure methods were composed of five factors, aesthetic, individuality, stability, physical character, and complexity. 3. At the part of harmony with surrounding landscapes, the slope revegetation methods were evaluated highly but the slope structure methods received the lowest evaluation. Also the harmony analysis with surrounding view on the slope revegetation methods showed degree of high more than average in all texture, form, color and scale but the slope structure methods showed degree of fewer than average degree in form, scale, color and texture.

• 대한토목학회논문집
• /
• 제28권6C호
• /
• pp.367-377
• /
• 2008

국내 기초구조물에 대한 하중저항계수설계법 개발의 일환으로 신뢰성에 기반한 항타강관말뚝의 저항계수를 산정하였다. 국내 정재하시험 및 지반조사 자료를 수집, 분석하여 측정 지지력 확인이 가능한 57개 자료에 대해서 선단부 N치 50을 기준으로 두 그룹으로 분류하였다(N<50, $N{\geq}50$). 구조물기초설계기준에서 제안하고 있는 두 가지 정역학적 설계공식에 대해서 대표 측정지지력과 설계지지력을 비교함으로써 저항편향계수를 평가하였다. 저항편향계수의 통계특성을 이용하여 일차신뢰도법 및 몬테카를로 시뮬레이션에 의한 엄밀한 신뢰성 분석을 실시하였다. 신뢰성 분석 결과 및 국내 말뚝기초의 설계, 시공 실무 특성을 종합적으로 고려하여 목표 신뢰도지수를 결정하였다. 무리말뚝의 여용성을 적용할 수 있는 경우 2.0, 2.33, 무리말뚝의 여용성을 적용할 수 없는 경우 2.5의 목표 신뢰도지수를 결정하였고, 일차신뢰도법 및 몬테카를로 시뮬레이션을 적용하여 저항계수를 산정하였다.

• 한국항해항만학회지
• /
• 제27권5호
• /
• pp.519-526
• /
• 2003

초대형 부유식 구조물의 초기 설계단계에서 부체구조물과 상부구조물을 분리하여 해석하는 것이 일반적이며, 부체의 탄성응답해석의 변형모드를 이용하여 상부구조물의 주각부에 강제수직변위를 입력하여 파랑하중에 의한 영향을 고려한다. 하지만 이와 같은 해석법의 경우 각 지점에 변위하중을 입력하는데 어려움이 있다. 본 논문에서는 파랑하중을 지점변위하중으로 직접 입력하지 않고 고정하중과 적재하중에 의한 강도설계 결과를 이용하여 파랑하중의 영향을 증폭계수의 형태로 도출하는 근사 실용정적해석법을 제안한다. 이 연구에서는 4경간 3층 구조물을 예제로 하여 파랑하중의 진폭과 주기, 보 경간을 매개변수로 한 증폭계수의 추이를 분석하였으며 보 모멘트의 증폭계수는 특정회귀방정식으로 나타내었다.

• 지식경영연구
• /
• 제10권2호
• /
• pp.35-48
• /
• 2009

The paper proposes a quantitative causal ordering map (QCOM) to combine qualitative and quantitative methods in a framework. The procedures for developing QCOM consist of three phases. The first phase is to collect partially known causal dependencies from experts and to convert them into relations and causal nodes of a model graph. The second phase is to find the global causal structure by tracing causality among relation and causal nodes and to represent it in causal ordering graph with signed coefficient. Causal ordering graph is converted into QCOM by assigning regression coefficient estimated from path analysis in the third phase. Experiments with the prediction model of Korea stock price show results as following; First, the QCOM can support the design of qualitative and quantitative model by finding the global causal structure from partially known causal dependencies. Second, the QCOM can be used as an integration tool of qualitative and quantitative model to offerhigher explanatory capability and quantitative measurability. The QCOM with static and dynamic analysis is applied to investigate the changes in factors involved in the model at present as well discrete times in the future.

• Journal of Welding and Joining
• /
• 제16권4호
• /
• pp.73-82
• /
• 1998

This paper is especially concerned with the weldment between support beam and square bar that plays important roles in control box of Expansion Joint as a brdige structure. Fatigue strength ({TEX}$$\sigma$_{ult}${/TEX}) of the weldment is dependent on notch factor ({TEX}$K_{f}${/TEX}) become important factors to predict fatigue life. The fatigue notch sensitivity (η) for metals can be divided into two types ; high and low notch sensitivity. In this work, the Expansion Joint weldment was found to have low notch sensitivity. The maximum strain distribution during static loading is similar to the FEM analysis. Fatigue test of real structure was performed up to {TEX}$10^{6}${/TEX} cycles to be compared with predicted endurance limit.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.193-200
• /
• 1997

Current seismic design code is based of the assumption that the designed structures would be behaved inelastically during a severe earthquake ground motion. For this reason, seismic design forces calculated by seismic codes are much lower than the forces generated by design earthquakes which makes structures responding elastically. Present procedures for calculating seismic design forces are based on the use of elastic spectra reduced by a strength reduction factors known as "response modificaion factor". Because these factors were determined empirically, it is difficult to know how much inelastic behaviors of the structures exhibit. In this study, base shear forces required to maintain target ductility ratio were first calculated from nonlinear dynamic analysis on the single degree of freedom system. And then, base shear foeces specified in seismic design code compare with above results. If the strength(base shear) required strength should be filled by overstrength and/or redundancy. Therefore, overstrength of moment resisting frame structure will be estimated from the results of static nonlinear analysis(push-over analysis).analysis).

• 항공우주기술
• /
• 제8권1호
• /
• pp.42-48
• /
• 2009

복합재 항공기의 경우 인증 시 여러 가지 요소를 고려해야한다. 금속과는 달리 복합재구조물의 감항성은 운용 및 제작 중 발생하는 손상 등에 의해 큰 영향을 받는다. 그러므로 예상 가능한 여러 가지 손상에 대해 정적강도, 강성, 플러터 및 손상허용강도 등을 입증하여 야한다. 복합재료의 기계적물성은 환경조건에 영향을 받는다. 특히 압축강도는 수지의 영향이 지배적이고 수지가 온도와 습도의 영향을 많이 받으므로 설계/해석 시 고려하여야한다. 복합재 항공기의 경우 육안으로 탐지가 어려운 손상에 대한 정적강도를 입증하여야하고, 육안으로 보이는 큰 손상에 대해서는 발견 즉시 수리하도록 규정되어있다. 본 논문에서는 복합재 구조물의 설계/해석에 필요한 규정을 분석하고 해석방법 등에 대해 검토하려한다.

• 한국항공우주학회지
• /
• 제42권1호
• /
• pp.67-75
• /
• 2014

항우연에서는 복합재 소형항공기(KC-100)에 대하여 15가지 전기체 시험조건과 7개의 국부적 시험조건들에 대한 전기체 정적구조시험을 수행하였다. 시험요구도, 시험일정, 시험체 및 더미구조, 시험하중산출, 시험장치, 시험장비 등을 소개하였다. 수십개의 제어채널을 사용하는 전기체 구조시험의 하중제어의 정확도를 살펴보기 위하여 U1의 시험데이터를 분석하였다. 분석결과 각 채널별 데이터 획득된 하중값은 허용오차인 SNPE(Static null pacing error)값 이내에서 잘 유지하고 있음을 보였고 본 논문의 저자가 제안한 시험의 하중제어오차 크기 정의방법을 적용한 결과 U1 시험의 하중제어 오차값이 8.6N 이었고 나머지 전기체 시험조건들에 대한 시험데이터를 분석한 결과도 보였다. 마지막으로 U1시험에서 자세제어장치에서 측정된 반력들이 시험하중 증가와 함께 변하는 것을 보였고 전기체 구조시험에서 반력변화 발생의 요인들에 대하여 기술하였다.

• 수산경영론집
• /
• 제28권2호
• /
• pp.1-18
• /
• 1997

The purpose of this study is to investigate empirically the characteristics of financial structure by using 76 fisheries corporations in Korea, and to suggest implications of the empirical results for government's financial policy for fisheries corporations. For the empirical test, we choose the following factors as the explanatory variables of cross-sectional regression analysis:firm-size(SIZE), collateral value of assets(TFATA), business risk(BRISK), growth(GROWTH), effective tax(ET), profitability(PROFIT). Two different debt ratios are used as dependent variables. One is defined as the ratio of total debt to total assets and the other is as that of long-term debt to total asset in terms of book value. The sample consists of 76 fisheries firms and sample period is 14 years from 1982 till 1995. From the results of cross-sectional regression analysis, the adjusted R$^2$values were high, 16∼79% and the overall F values indicated to be statistically significant. The results of cross sectional regression analysis show that the characteristics of financial structure fur fisheries corporations are as follows ; (1) Firm-size and collateral value of assets are the major factors of financial structure for fisheries corporations. That is, the larger firm-size the higher is debt ratio. This means that financial institutions conventionally lend more collateral loans with fixed assets like land, building rather than management capacities or credits. (2) To be consistent with a pecking-order theory, the higher is profitability the lower is debt ratio in fisheries corporations. (3) Corporations with high effective tax rate have lower financial leverage. Although the empirical results are inconsistent with traditional static trade-off theory, we think it would be attributed to government's various tax shelterings for fisheries which are likely to reduce tax shield effect of interests.

• Archives of Plastic Surgery
• /
• 제41권6호
• /
• pp.630-637
• /
• 2014

A long nose with a drooping tip is a major aesthetic problem. It creates a negative and aged appearance and looks worse when smiling. In order to rectify this problem, the underlying anatomical causes should be understood and corrected simultaneously to optimize surgical outcomes. The causes of a drooping tip of a long nose are generally classified into two mechanisms. Static causes usually result from malposition and incorrect innate shape of the nasal structure: the nasal septum, upper and lower lateral cartilages, and the ligaments in between. The dynamic causes result from the facial expression muscles, the depressor septi nasi muscle, and the levator labii superioris alaeque nasi muscle. The depressor septi nasi depresses the nasal tip and the levator labii superioris alaeque nasi pulls the alar base upwards. Many surgical methods have been introduced, but partial approaches to correct such deformities generally do not satisfy East Asians, making the problem more challenging to surgeons. Typically, East Asians have thick nasal tip soft tissue and skin, and a depressed columella and alar bases. The authors suggest that multifactorial approaches to static and dynamic factors along with ancillary causes should be considered for correcting the drooping tip of the long noses of East Asians.