• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.37-47
• /
• 2013

Recently, lots of research results on program comparison have been reported since the code theft become frequent as the increase of code mobility. This paper proposes a plagiarism detection method using class structures. The proposed method constructs a graph representing the referential relationship between the member variables and the methods. This relationship is shown as a bipartite graph and the test for graph isomorphism is applied on the set of graphs to measure the similarity of the programs. In order to measure the effectiveness of this method, an experiment was conducted on the test set, the set of Java source codes submitted as solutions for the programming assignments in Object-Oriented Programming course of Pusan National University in 2012. In order to evaluate the accuracy of the proposed method, the F-measure is compared to those of JPlag and Stigmata. According to the experimental result, the F-measure of the proposed method is higher than those of JPlag and Stigmata by 0.17 and 0.34, respectively.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.480-488
• /
• 2000

Cabbage is the most important vegetables in korea. The cabbage production was based on arduous human labor. A comprehensive research for substituting the human work by machines has been performed at present. In general, cabbage is cultivated on hillside in korea. The harvested cabbage in a field and carrying it to a vehicle for transportation are very laborious work. Hand labor in cabbage transportation to the market damages the quality of cabbage and is also a cause to increase the cost of cabbage production. This study was to design and evaluate a prototype cabbage loader for deserving efficient and safe transportation of cabbage. The developed cabbage loader was a semi-tracked vehicle operated by a hydraulic system, allowing the safe transporting and the loading of cabbage in a steep field. The maximum loading capacity of the loader was 1.0 ton. By using safety devices attached to the loader, the static slopes were 34.0% and 37.4% for the left and the rear roll-over, respectively. The maximum field speed was about 6km/hr with two cabbage pallets of 750kg at a 25% inclined field. The field capacity was about 35 pallets/hr in case of picking up, carrying and unloading two cabbage pallets. The field efficiency of the loader was analyzed to be more than 8 times in comparison of the conventional human labor. The developed loader would be applied for loading and carrying the other vegetables due to the similarity of operations. The study suggested a standard approach to the design of field machines operated in a steep field.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.155-164
• /
• 2011

APP based on the smart phone is being utilized to various scopes such as medical services in hospitals, financing services at banks and credit card companies, and ubiquitous technologies in companies and homes etc. In this service environment, exposures of smart phones cause loss of assets including leaks of official/private information by outsiders. Though secret keys, pattern recognition technologies, and single image authentication techniques are being applied as protective methods, but they have problems in that accesses are possible by utilizing static key values or images like pictures. Therefore, this study proposes a face authentication technology for protecting smart phones from these dangerous factors and problems. The proposed technology authenticates users by extracting key frames of user's facial images by real time, and also controls accesses to the smart phone. Authentication information is composed of multiple key frames, and the user' access is controlled by distinction algorism of similarity utilizing DC values of image's pixel and luminance.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.9 s.90
• /
• pp.903-909
• /
• 2004

A CFA(cooling fan assembly) is composed of a fan, motor and shroud, which is at the back of the automotive radiator. By forcing the wind to pass, the CFA controls the cooling performance of the radiator. The noise and vibration of the CFA may be primarily due to the resonance between the CFA and engine. The Interference among the fan, shroud and radiator by deformation is considered when the CFA is designed. In this paper, in order to analyze the structural vibration of the CFA for automobiles, a finite element model of the CFA is established by using a commercial FEM code. After the finite element modeling, the natural frequencies and the mode shapes are obtained from the FE analysis. The natural frequencies are obtained from the vibration test as well. Then, the results of the vibration test are compared with those of the FE analysis. The natural frequencies obtained by experiment have a great similarity to the results from FE model. We have confirmed the validity of the FE model and verify the structural safety for the resonance. The stress and displacements are obtained from FE analysis. We have confirmed the safety for the interference and failure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.3 s.246
• /
• pp.278-286
• /
• 2006

Experiments were conducted to estimate the performance of drag force type vertical axis wind turbine with an opening-shutting rotor. It was operated by the difference in drag force generated on both sides of the blades. The rotational speed was measured by a tachometer in a wind tunnel and the tunnel wind speed was measured by using a pilot-static tube and a micro manometer. The performance test for a prototype was accomplished by calculating power, power coefficient, torque coefficient from the measurement of torque and rpm by a dynamometer controller. Various design parameters, such as the number of blades(B), blade aspect ratio(W/R), angle of blades$(\alpha)$ and drag coefficient acting on a blade, were considered for optimal conditions. At the experiment of miniature model, maximum efficiency was found at N=15, $\alpha=60^{\circ}$ and W/R=0.32. The measured test variables were power, torque, rotational speed, and wind speeds. The data presented are in the form of power and torque coefficients as a function of tip-speed ratio V/U. Maximum power was found in case of $\Omega=0.33$, when the power and torque coefficient were 0.14 and 0.37 respectively. Comparing model test with prototype test, similarity law by advance ratio for vertical axis wind turbine was confirmed.

• Communications of Mathematical Education
• /
• v.35 no.3
• /
• pp.323-340
• /
• 2021

The purpose of this case study is to explore the similarities revealed in the process of solving and generalizing word problems related to systems of linear equations in two variables according to covariational reasoning. As a result, student S, who reasoned with coordination of value level, had a static image of the quantities given in the situation. student D, who reasoned with smooth continuous covariation level, had a dynamic image of the quantities in the problem situation and constructed an invariant relationship between the quantities. The results of this study suggest that the activity that constructs the relationship between the quantities in solving word problems helps to strengthen the mathematical problem solving ability, and that teaching methods should be prepared to strengthen students' covariational reasoning in algebra learning.

• Composites Research
• /
• v.32 no.5
• /
• pp.206-210
• /
• 2019

As the use of composite materials of woven structure has expanded to various fields such as automobile and aviation industry, there has been a need for reliability problems and prediction of mechanical properties of woven composites. In this study, finite element analysis for predicting the mechanical properties of composite materials with different weaving structures was conducted to verify similarity with experimental static properties and an effective modeling method was developed. To reflect the characteristics of the weave structure, the meso-scale representative volume element (RVE) was used in modeling. Three-dimensional modeling was carried out by separating the yarn and the pure matrix. Hashin's failure criterion was used to determine whether the element was failed, and the simulation model used a progressive failure model which was suitable for the composite material. Finally, the accordance of the modeling and simulation technique was verified by successfully predicting the mechanical properties of the composite material according to the weave structure.

• Smart Media Journal
• /
• v.10 no.3
• /
• pp.23-30
• /
• 2021

Although the manufacturing time series data clustering technique is an important grouping solution in the field of detecting and improving manufacturing large data-based equipment and process defects, it has a disadvantage of low accuracy when applying the existing static data target clustering technique to time series data. In this paper, an evolutionary computation-based time series cluster analysis approach is presented to improve the coherence of existing clustering techniques. To this end, first, the image shape resulting from the manufacturing process is converted into one-dimensional time series data using linear scanning, and the optimal sub-clusters for hierarchical cluster analysis and split cluster analysis are derived based on the Pearson distance metric as the target of the transformation data. Finally, by using a genetic algorithm, an optimal cluster combination with minimal similarity is derived for the two cluster analysis results. And the performance superiority of the proposed clustering is verified by comparing the performance with the existing clustering technique for the actual manufacturing process image.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.3
• /
• pp.17-28
• /
• 2006

The appearance of variant malicious codes using obfuscation techniques is accelerating the spread of malicious codes around the detection by a vaccine. n a system does not patch detection patterns for vulnerabilities and worms to the vaccine, it can be infected by the worms and malicious codes can be spreaded rapidly to other systems and networks in a few minute. Moreover, It is limited to the conventional pattern based detection and treatment for variants or new malicious codes. In this paper, we propose a method of behavior based detection by the static analysis, the dynamic analysis and the dynamic monitoring to detect a malicious code using obfuscation techniques with the PE compression. Also we show that dynamic monitoring can detect worms with the PE compression which accesses to important resources such as a registry, a cpu, a memory and files with the proposed method for similarity.

• Journal of Animal Science and Technology
• /
• v.66 no.2
• /
• pp.374-386
• /
• 2024

To predict the apparent total tract digestibility (ATTD) of crude protein (CP) in dogs we developed an in vitro system using an in vitro digestion method and a statistical analysis. The experimental diets used chicken meat powder as the protein source, with CP levels of 20% (22.01%, analyzed CP value as dry-based), 30% (31.35%, analyzed CP value as dry-based), and 40% (41.34%, analyzed CP value as dry-based). To simulate in vivo digestive processes a static in vitro digestion was performed in two steps; stomach and small intestine. To analyze ATTD the total fecal samples were collected in eight neutered beagle dogs during the experimental period. CP digestibility was calculated by measuring CP levels in dog food, in vitro undigested fraction, and dog feces. In result, CP digestibility at both in vivo and in vitro was increased with increasing dietary CP levels. To estimate in vivo digestibility the co-relation of in vivo ATTD and in vitro digestibility was investigated statistically and a regression equation was developed to predict the CP ATTD (% = 2.5405 × in vitro CP digestibility (%) + + 151.8). The regression equation was evaluated its feasibility by using a commercial diet. The predicted CP digestibility which was calculated by the regression equation showed high index of similarity (100.16%) with that of in vivo in dogs. With that, it would be a feasible non-animal method to predict in vivo CP digestibility by using in vitro digestion method and the proposed linear regression equation in adult dogs.