• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.150-156
• /
• 1996

Static variations of cutting forces are estimated using spindle motor current. Static sensitivity of spindle motor current is higher than feed motor current. The linear relationship between the cutting force and RMS value of the spindle motor current is obtained. Using cutting force estimation, tool overload in milling process can be well detected, and cutting force is regulated at a constant level by feedrate adaptive control.

• International Journal of Railway
• /
• v.1 no.3
• /
• pp.94-98
• /
• 2008

Static inverters are essential devices onboard of rolling stock. State-of-the-art static inverters have an impact on both rail infrastructure and vehicle maintenance due to their new topology with new features. The paper describes two important aspects as examples of new features available in state-of-the-art static inverters: active input current control and the effects on the rail infrastructure as well as the detection of the state of charge and the state of health of batteries to simplify vehicle maintenance.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.114-118
• /
• 2016

In this paper, we present the advanced open collector circuit, interface circuit between aerospace electronics. Satellite is composed of a number of electronics, which were provided from various manufacturers. Each company manufactured its own electronics for satellite using its heritage and requirements for their electronics. Therefore each electronics may use different internal supplies. It make a problem between electronics because the supply is different from other electronics, such as the increasing of power dissipation because of the static current and the mismatch of interface voltage, the offset. Proposed circuit can reduce the static current and rising time, and also decrease the useless power dissipation caused by the static current for open collector circuit

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.11
• /
• pp.1183-1190
• /
• 1990

In this paper, instantaneous reactive power compensation algorithm is proposed and analyzed. The static Var generator developed in this paper is the current source PWM converter using hysteresis comparator method, which compensates the reactive power by detecting each instantaneous phase voltage and line current, independently. Some aspects on the static Var compensator-such as inductance, capacitance, hysteresis width, and switching frequency, etc.-are discussed. The dynamic performances are examined through digital simulation and experimental test.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1004-1011
• /
• 2016

The inaccurate model parameters in the predictive current control of surface-mounted permanent magnet synchronous motor (SMPMSM) affect the current dynamic response and steady-state error. This paper presents a model parameter correction algorithm based on the relationship between the errors of model parameters and the static errors of dq-axis current. In this correction algorithm, the errors of inductance and flux are corrected in two steps. Resistance is ignored. First, the proportional relations between inductance and d-axis static current errors are utilized to correct the error of model inductance. Second, the flux is corrected by utilizing the proportional relations between flux and q-axis static current errors under the condition that inductance is corrected. An experimental study with a 100 W SMPMSM is performed to validate the proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.222-223
• /
• 2006

In this paper, we manufactured high flux LED module with Through Hole type. and we measured electrical, optical and thermal properties by driving type. LED module was composed with 8*8 arrangement form by using the glass epoxy PCB. Also, we measured the most suitable driving type with static voltage driving type and static current driving type. As a result, the LED Module of static voltage driving type showed high luminance characteristic than the static current driving type by suppling enough bias. However, the static current driving type showed more stable driving properties because of fast decreasing properties about brightness by increasing the surrounding temperature in the static voltage driving type. Also, due to Quantum confined Stark effect from piezoelectric field, the wavelength of bule peak shifted to long wavelength direction by increasing the surrounding temperature in the static voltage driving type.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1342-1348
• /
• 2009

DSTATCOM(distribution static compensator) is one of the custom power devices, and protects a distribution line from unbalanced and harmonic current caused by non-linear and unbalanced loads. Researches about DSTATCOM are mainly divided two parts, one is the calculation of compensated current and the other part is the current control. This paper proposes a proportional-resonant-repetitive current controller. Improved performance of instantaneous power compensation has been shown by simulations and experiments.

• The Journal of Korean Physical Therapy
• /
• v.31 no.5
• /
• pp.328-332
• /
• 2019

Purpose: This study examined the effects of transcranial direct current stimulation (tDCS) on the static balance ability of patients with back pain. Methods: The subjects comprised of 30 males and females in their 20s, who were divided into two groups with and without tDCS. The balance posture ratio score was calculated to determine the changes in balance ability before and after the application of tDCS using balance equipment. A paired t-test was conducted to determine the changes over time, and an independent t-test was performed to determine the changes between the groups. The significance level was set to ${\alpha}=0.05$. Results: A significant difference in the changes in the static balance ability of CTDCSG between before and after applying tDCS was observed while the subjects' eyes were open (p<0.05). A comparison between the groups after the experiments revealed significantly increased changes in CTDCSG compared to STDCSE (p<0.05). The changes in static balance ability were not significant when the subjects' eyes were closed (p>0.05). Conclusion: The application of tDCS positively changed the static balance ability of patients with back pain. The results of this study showed that tDCS could be used as an intervention to increase the static balance ability of patients with back pain in the clinical field. The study results could be used further as foundational data for future studies on tDCS.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.53-60
• /
• 1995

A multi-leg spread mooring system for floating offshore structures is important, but the multi-leg static analysis is complicated due to the nonlinear behavior of each line and the effect of current which affects each line differently. The pretensioned position of the multi-leg mooring system obtained from the static equilibrium condition changes into a different position due to external loads and current. In this paper, the new position and the static tension at each line are caculated. The relation between the initial static equilibrium position and the new position due to the external loads is expressed in terms of the Taylor's series expansion. The Runge-Kutta $4^{th}$ method is employed in analyzing the 3-dimensional static cable nonlinear equations.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.624-626
• /
• 1993

The Electrical Charge generated by friction in flowing insulating oil can create hazadous accidents. Neutralization of static charges in the oil during transportation is an obvious method of overcoming the problem of internal electric charge. It is known that SCR(Static Charge Reducer) can neutralize much of this charge by the needle electrode and mixing it with the original charge. In our experiment, a filter to generate static charge was set just befor a measurement pipe, and streaming current from the filter to the earth $I_s$, current from the electrode to the earth $I_e$ and current from the receiving tank to the earth $I_f$ were measured in a steady state. As a result, charge density and needle electrode current increases with increasing of oil temperature. Charge elimination rate decreases with increasing of oil flow rate, and increases with increases of oil temperature. Faraday Cage current decreases with increasing of oil temperature.