• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.91-96
• /
• 2003

In static relative surveying, the difference of between the known cadastral supplementary control station and that of the acquired is 0.000∼0.0006m in GPS alone, GPS/GLONASS, and In the RTK-GPS/TS, 0.010∼0.077m on the non-ambiguity fixed solutions in the urban area, 0.008∼0.078m in the open area. it proved to be valid because it is within the allowed connecting errors, i.e 12cm on the baseline of l00m in 1/1,200 cadastral map.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.583-591
• /
• 2011

Accurate observation results of dynamic displacements are essential to the protection of civil structures. In this study, we evaluated the optimal methods of the RTK/GPS Accelerometer integration through comparison and analysis of several experiments results. Two methods will be used to calculate the dynamic displacements from the results of the acceleration data as well as two integration methods for measuring the dynamic, static, and quasi-static displacements by incorporating the displacement results from the RTK-GPS and Accelerometer. By using a Cantilever Beam and LVDT measurement, we were able to ensure that the different displacement comparisons would be reliable and accurate. As a results from experiments, the accelerometer processing method applied by use of accelerometers data was filtering with the double integral using FIR band-pass filter which is most optimal for assessing the dynamic displacements. Also, the integrated method using extracting substitution displacements is suitable for measuring synthetically the dynamic static and quasi-static displacements of civil structures with RTK-GPS and accelerometer.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.119-126
• /
• 2011

During precise survey on the top of High rise buildings and civil structures, optical surveying equipments like a Total Station are not recommended to use because of some reasons that uneasier alignment with reflectors located at the top of building, increasing error depends on increasement of observation distance and unavailable dynamic positioning etc. Recently various GPS positioning methods have been applied to this job however almost of them are post-processing method which is required much longer time during for whole process includes stake-out, cross checking, fixing positions and final inspections. Therefore, in this study, we applied with RTK surveying system which allows stake-out and inspection in realtime to avoid delaying of construction schedule and also applied with Quasi Static RTK measurement and network adjustment to get a high accuracy within a few millimeters in structure positioning to achieve a successful management for process and quality control of the project. As a result, very high accurate surveying for structures within approx. 2mm in realtime has been achieved when surveyor conduct a network adjustment using least square method for 4 base lines created by Quasi Static RTK data and we expect this method will be applied to construction survey for high rise buildings and civil structures in the future.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.35-41
• /
• 2001

In order to investigate duration of session in static GPS method, data from a network of 7 points, with baseline length of from 64 km to 358 km, were processed. The network were observed by Trimble 4000SSE and Trimble 4000SSi with duration of 24 hours. Data extracted from this session were processed as if they were measured in 3, 6, 9 ... 21, and 24 hours session. The results (Baselines, Sloop Closures, Coordinates, and Standard errors of coordinates) of these sessions were compared to 24 hours one. Some conclusions were made, which seem to be useful in selection of duration for the same dimension GPS network for different purposes.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.109-113
• /
• 2003

GPS 상시관측소의 활용과 중요성은 GPS측량에서 폭넓은 사용과 비교적 높은 정확도를 충족시키는 방안으로 점점 가치를 더 하고 있다. 현재 RINEX 포맷 형태로 인터넷 서비스를 하고 있는 GPS 상시관측소의 자료를 이용하여 기준점으로써의 가치를 평가하고 또한 시간과 경비를 줄일 수 있는 방법인 VRS-GPS기법을 연구하고자 한다. 본 연구에서는 임의의 기준국을 설치하여, 기존 삼각점과 GPS 상시관측소를 이용해 관측망을 형성, 그 결과를 비교 고찰하였으며 이 기준국을 RTK-GPS의 고정국으로 하여 실시간 측위를 하였다. 고정국은 전자 가상 기준국인 VRS-RTK 개념으로 가정하고 비교, 검증하였다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.91-96
• /
• 2004

More recently, multiple reference based RTK GPS techniques(VRS : Virtual Reference System) are becoming increasingly important for many precise GPS applications in many countries to overcome the constrained distance limitations of standard RTK systems. The precision of the position solutions of the rover receiver is closely connected with that of the corresponding virtual reference points(VRPs). The objective of this paper is to investigate the accuracy and performance of the VRPs on the test network for static positioning in post processing mode. For this, some VRPs at the inside and outside of test network have made in post mode, and the overall analysis results were presented by comparing the solution for the VRPs from the existed GPS reference station with the true values of the coordinates used to produce the observation data. The results show the reasonable accuracies of VRPs in the network area by using the VRS concept in post mode.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.113-117
• /
• 2004

Such social structures as bridges, buildings, dams and towers have been transformed by their own load or fundamental ground. They have been behaved by other external causes. These regular or irregular behaviors threaten to do their users safety. Therefore, to monitor the load of the structures or reaction shown by them could help to verify their behaviors. RTK GPS allows the use of a static base station and remote rover unit to allow for data collection within several seconds and in real time. It is useful for monitoring the behaviors of massive structures like bridges. In this Study, Among GPS methods, we used RTK GPS to analyze the precision of monitoring and then on the basis of it, we developed a monitoring system using RTK GPS when measured the behavior of main tower of a suspension bridge by using RTK GPS. Comparing a deviation between observation values, X axis was 1mm, Y axis was 1mm and Z axis 2.2mm. It turned out that it was possible to monitor and measure structures by RTK GPS.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.47-52
• /
• 2006

In recent years, there is a strong urge to introduce GPS systems which can role in reference points and measure global positions to the field of structural measurements. In this study, a new structural measurement system using low-cost L1 single frequency GPS receivers instead of conventional expensive RTK L1&L2 dual frequency GPS receiver. This system consists of GPS OEM board, GPS antenna, wireless access points, and monitoring program based on Lambda method and makes it possible to apply to monitor a static behavior of large scaled Infra-structures, such as dams, tall buildings, road slops.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.89-92
• /
• 2006

The main objective of this study is to evaluate the RTK-GPS by the CDMA in Daejeon. As the result of RTK-GPS by CDMA, as a consequence of comparing the resulted of fast static GPS, we were able to prove the fact that we can determine the 3 dimensional information from horizontal in error of ${\pm}0.029m$(CE90. CMAS) and from vertical in ${\pm}0.027m$(LE 90, LMAS) in WGS-84 coordinate system.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.177-180
• /
• 2006

In this paper we proposed a method of automatic point segmentation acquired by 2D laser scanner to recognize moving objects. Recently, Laser scanner is noticed as a new method in the field of close range 3D modeling. But the majority of the researches are pointed on precise 3D modeling of static objects using expensive 3D laser scanner. 2D laser scanner is relatively cheap and can obtain 2D coordinate information of moving object's surface or can be utilized as 3D laser scanner by rotating the system body. In these reasons, some researches are in progress, which are adopting 2D laser scanner to robot control systems or detection of objects moving along linear trajectory. In our study, we automatically segmented point data of 2D laser scanner thus we could recognize each of the object passing through a section.