• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.971-977
• /
• 2020

In this paper, We propose a portable electrostatic meter which can measure high voltage static electricity caused by friction to prevent fire or explosion accidents in grinding, crushing, power injection, transport, filling, dust removal, painting, and foreign matter removal processes. The proposed device not only shows static electricity strength in 4 steps with respect to distance and voltage but also gives warning with a buzzer, on process facilities that are likely to generate high voltage static electricity due to friction. The device is implemented by filtering the signal detected by the wireless antenna, amplifying the signal by 6 times, and passing the signal through the integrator circuit. Tests are carried out with an electrostatic discharge simulator. And the results show that 4 LEDs are turned on at the distance of 10cm, 3 LEDs at 12cm, 2 LEDs at 13cm, and 1 LED at 15cm, when a fixed voltage of 500V is given. And also, the tests show that the static electricity can be detected at 5cm on 100V, 10cm on 200V, 15cm on 500V, 20cm on 1000V, and 25cm on 1500V. We expect to reduce accidents caused by static electricity by allowing safety managers on fields where fire or explosion accidents can happen to monitor static electricity.

• 해양환경안전학회지
• /
• 제27권1호
• /
• pp.193-200
• /
• 2021

본 연구에서는 국부 비선형 정적 해석을 효율적으로 수행하기 위하여 강성응축(Static condensation)을 활용한 해석기법을 제시하였다. 강성응축기법은 자유도 기반의 유한요소 모델 축소기법이며, 해석 모델을 관심 대상(Target) 부분과 응축되어 생략될(Omitted) 부분으로 구분한다. 본 연구에서는, 관심 대상 부분에는 비선형 영역, 생략될 부분에는 선형 영역으로 지정하였고, 선형 영역에 대응되는 강성 행렬 및 하중 벡터를 비선형 영역, 즉 관심 대상 부분으로 모두 응축하였다. 모델 응축 후에는 비선형 영역에 대한 강성 행렬 및 하중 벡터만으로 이루어진 축소 모델을 구성하였으며, 이 축소 모델만을 뉴턴-랩슨 반복(Newton-Raphson iteration)을 통해 갱신하여 효율적으로 비선형 해석을 수행하였다. 끝으로, 제안된 기법을 다양한 수치 예제에 적용하여 해석기법의 효율성과 신뢰성을 제시하였다.

• The Journal of Korean Physical Therapy
• /
• 제33권6호
• /
• pp.272-277
• /
• 2021

Purpose: The purpose of this study is to confirm the effect of static stretching of the plantar flexor for 5 minutes on balance and ankle muscle activity when walking in young adults. Methods: This study experimented on 20 healthy college students without vestibular and musculoskeletal diseases. Subjects performed static stretching intervention of plantar flexor for 5 minutes on a stretch board set at 15° to 25° Balance was measured four times before intervention (pre), after intervention (post), 5 minutes after intervention (post 5 min), 10 minutes after intervention (post 10 min), and ankle muscle activity was measured during walking. For the analysis and post hoc analysis, one-way Repeated Measure ANOVA and Fisher's LSD (Last Significant Difference) was performed to find out the change in balance and the activity of ankle muscles before static stretching, pre, post, post 5 minutes rest, post 10 minutes rest. Results: There was no significant difference in weight distribution index (WDI) in balance, but stability index (ST) showed a significant difference, and there was also a significant difference in correlation pre, post, post 5min rest, post 10 minutes rest (p<0.05). There was no significant difference in ankle muscle activity during walking in Tibialis anterior (TA), Medial gastrocnemius (GM), and Lateral gastrocnemius (GL) (p>0.05). Conclusion: The stability index (ST) increased significantly immediately after static stretching and decreased after 5 minutes. After static stretching, at least 5 minutes of rest are required to restore balance.

• Geomechanics and Engineering
• /
• 제29권2호
• /
• pp.99-111
• /
• 2022

Instability of bolted rock mass has been a major hazard in the underground coal mining industry for decades. Developing effective support guidelines requires understanding of complex bolted rock mass failure mechanisms. In this study, the dynamic failure behavior, mechanical behavior, and energy evolution of a laboratory-scale bolted specimens is studied by conducting laboratory static-dynamic coupled loading tests. The results showed that: (1) Under static-dynamic coupled loading, the stress-strain curve of the bolted rock mass has a significant impact velocity (strain rate) correlation, and the stress-strain curve shows rebound characteristics after the peak; (2) There is a critical strain rate in a rock mass under static-dynamic coupled loading, and it decreases exponentially with increasing pre-static load level. Bolting can significantly improve the critical strain rate of a rock mass; (3) Compared with a no-bolt rock mass, the dissipation energy ratio of the bolted rock mass decreases exponentially with increasing pre-static load level, the ultimate dynamic impact energy and dissipation energy of the bolted rock mass increase significantly, and the increasing index of the ratio of dissipation energy increases linearly with the pre-static load; (4) Based on laboratory testing and on-site microseismic and stress monitoring, a design method is proposed for a roadway bolt support against dynamic load disturbance, which provides guidance for the design of deep underground roadway anchorage supports. The research results provide new ideas for explaining the failure behavior of anchorage supports and adopting reasonable design and construction practices.

• 한국지반공학회논문집
• /
• 제22권10호
• /
• pp.151-163
• /
• 2006

본 논문에서는 모래의 비배수 정적전단거동과 반복전단거동의 상호관계를 분석하기 위하여 낙동강 모래를 사용하여 비배수 정적 및 반복삼축시험을 실시하였다. 정적삼축시험은 반복전단거동과의 상호비교를 위하여 인장시험을 포함하여 실시하였다. 그리고 반복삼축시험은 초기정적전단응력$(q_{st})$과 반복응력$(q_{cy})$조건을 조합하여 여러 응력조건 하에서 실시하였다. 시험결과 반복전단거동의 응력경로는 정적전단거동의 한계응력비(CSR)선을 지나면서 유동변형이 발생하여 정적전단거동과 일치하였으며, 그 후 정적전단거동의 파괴선(FL)을 따라 파괴가 발생하였다. 이러한 반복 전단거동의 응력경로는 시험방법이 다름에 따른 약간의 차이는 있으나 정적전단거동의 응력경로와 본질적으로 동일함을 알 수 있었다.

• 한국운동역학회지
• /
• 제34권2호
• /
• pp.53-62
• /
• 2024

Objective: The purpose of this study was to analyze the differences in kinematic factors according to stretching treatment, myofascial release treatment, and static stretching treatment conditions during squat. Method: Twelve males with resistance training experience participated in this study. Participants performed squats without treatment (Pre-Test), and performed squats after treatment with the myofascial release technique (MRT) and static stretching (SS) on different days (post-test). Squat movements were captured using eight motion capture cameras (sampling rate: 250 Hz), and the peak joint angles of the ankle, knee, hip, and pelvis were calculated for each direction. One-way repeated ANOVA and Bonferroni post hoc analyses using SPSS 27 (IBM Corp. Armonk NY, USA) were used to compare the peak joint angle of the lower extremity joints and pelvis among the normal condition (squat without treatment), MRT condition (squat after MRT treatment) and SS condition (squat after static stretching). The statistical significance level was set at .05. Results: It was observed that the maximum ankle joint flexion angle during squats was statistically reduced under conditions of myofascial release and static stretching (p<.05), in comparison to the scenario where no stretching was performed. Furthermore, static stretching was found to enhance the maximum hip flexion angle during squat (p<.05), whereas the myofascial release stretching technique resulted in the minimal posterior pelvic tilt angle (p<.05). Conclusion: Employing myofascial release stretching as a preparatory exercise proved to be more efficacious in maintaining body stability throughout the execution of high-intensity squat movements by effectively managing the posterior tilt of the pelvis, as opposed to foregoing stretching or engaging in static stretching.

• 대한물리치료과학회지
• /
• 제31권2호
• /
• pp.63-74
• /
• 2024

Background: This study aimed to determine the effects of static stretching on the pain and range of motion (ROM) of shoulder joints in middle aged women patients with frozen shoulders. Design: One group pretest-posttest design Methods: The participants were 15 middle aged women patients with frozen shoulders in their 40s to 60s. Subjective and objective pain and joint ROM(range of motion) were measured, and the static stretching intervention consisted of 15 minutes of flexion, abduction and external rotation stretching. Results: The results of this study indicated that the daily pain of shoulder joints and pressure pain thresholds of the muscles surrounding the shoulder joints were generally improved after the intervention with the static stretching, for which significant differences were observed (p<0.05). The ROM of shoulder joint flexion, abduction, and external rotation was significantly increased (p<0.05) after the intervention with the static stretching. Conclusion: Static stretching intervention in patients with frozen shoulders relieved shoulder joint pain and had positive effects on the ROM of shoulder joints. Thus, the application of static stretching in middle aged womenpatients who experience severe pain could be effective at enhancing the function of shoulder joints without pain.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.273-274
• /
• 2012

• Computers and Concrete
• /
• 제30권4호
• /
• pp.237-242
• /
• 2022

This paper is concerned with exponential stability in mean square for stochastic static neutral neural networks with varying delays. By using Lyapunov functional method and with the help of stochastic analysis technique, the sufficient conditions to guarantee the exponential stability in mean square for the neural networks are obtained and some results of related literature are extended.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1435-1437
• /
• 2003

In this paper, we proposed static output feedback model predictive control for Wiener models. We adopted polytopic uncertainty description of Wiener Model Predictive Control (WMPC) algorithms for considering output nonlinearities. Robust stability conditions have been presented under which the closed loop stability of static output feedback MPC is guaranteed. The proposed control law is determined from the static output feedback WMPC based on the current estimated state with explicit satisfaction of input constraints.