• 한국군사과학기술학회지
• /
• 제26권1호
• /
• pp.1-9
• /
• 2023

The skin structure of sensor pod mounted on the exterior of aircraft can be exposed to the acoustic dynamic load and static load such as aerodynamic pressure and inertial load during flight. Fatigue life prediction of structural model under acoustic load should be performed and also differential stiffness of model modified by static load should be considered. The acoustic noise test spectrum of MIL-STD-810G was applied to the structural model and the stress response power spectral density (PSD) was calculated. The frequency response analysis was performed with or without prestress induced by inplane static load, and the response spectrum was compared. Time series data was generated using the calculated PSD, and the time and frequency domain fatigue life were predicted and compared. The variation of stress response spectrum due to static load and predicted fatigue life according to the different structural model considering mean stress were examined and decreasing fatigue life was observed in the model with prestress of compressive static load.

• 한국건축시공학회지
• /
• 제15권5호
• /
• pp.473-481
• /
• 2015

공동주택의 구조형식이 점차 기둥식 구조로 바뀌면서 비내력 경량벽체의 수요가 증가하고 있다. 경량벽체는 구조적 안전을 위해 소정의 내력을 확보할 필요가 있다. 본 연구에서는 경량벽체의 정적 수평하중저항성 및 내충격성 시험방법의 기초자료로서 활용하기 위해 인간이 벽체에 가하는 힘을 실험적으로 파악하였다. 정적하중을 가하는 동작으로는 양손 밀기, 어깨 밀기, 등 기대기, 한 손 기대기의 4종류를 설정하였다. 동적하중을 가하는 동작으로는 발뒤꿈치차기, 어깨 부딪치기, 주먹치기의 3종류를 설정하였다. 하중해석 장치의 하중판 강성은 20kN/cm, 4.7kN/cm, 2.2kN/cm의 3종류로 설정하였다. 정적하중 해석결과로부터, 동작별 최대하중비(Pmax/W)는 양손 밀기의 경우 1.17~1.25, 어깨 밀기의 경우 0.95~0.99, 등 기대기의 경우 0.16~0.18, 한 손 기대기의 경우 0.12~0.15인 것을 알 수 있었다. 또한 동적하중 해석결과로부터, 동작별 최대하중비(Pmax/W)의 상한 값은 발차기의 경우 약 10.07, 어깨 부딪치기의 경우 4.46, 주먹치기의 경우 약 5.58인 것을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.475-480
• /
• 1997

It is common to assum identical allowable safety factors in static strength, defined by mean stress and in fatigue, defined by stress amplitude. Under the load with asymmetrical cycles the safety factor is not the same. In this paper, with the consideration of unequal allowable safety factors a general method for estimating fatigue reliability of a machine element under a combined state of stress is derived based on the theory proposed by Prof. Kececioglu and normal distribution. The calculation of fatigue reliability for limited life is discussed with example.

• 연구논문집
• /
• 통권27호
• /
• pp.57-73
• /
• 1997

The bogie between the track and the railway vehicle body, is one of the most important component in railroad vehicle. Its effects on the safety of both passengers and vehicle itself, and on the overall performance of the vehicle such as riding quality, noise and vibration are critical. The bogie is mainly consisted of the bogie frame, suspensions, wheels and axles, braking system, and transmission system. The complex shapes of the bogie frame and the complicate loading condition (both static and dynamic) induced in real operation make it difficult to design the bogie frame fulfilling all the requirements. The complicated loads applied to the bogie frame are i) static load due to the weight of the vehicle and passengers, ii) quasi-static load due to the rolling in curves iii) dynamic load due to the relative motion between the track, bogie, and vehicle body. In designing the real bogie frame, fatigue analysis based on the above complicated loading conditions is a must. In this study, stress analysis of the bogie frame has been performed for the various loading conditions according to the UIC Code 6 15-4. Magnitudes of the stress amplitude and mean stress were estimated based on the stress analysis results to simulate the operating loads encountered in service. Fatigue strength of the bogie frame was evaluated by using the constant life diagram of the material. 3-D surface modelling, finite element meshing, and finite element analysis were performed by Pro-Engineer, MSC/PATRAN, and MSC/NASTRAN, respectively.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권11호
• /
• pp.507-517
• /
• 2005

This paper presents the results of critical contingency analysis for the Korean power system which is performed to identify the impact of the critical contingencies on the Korean power system and set up a short term system operation planning for the purpose of preventing large scale blackout. The static and dynamic simulation is carried out for each critical contingency and the simulation results for each contingency are shown under the peak load condition for the year 2005, 2007 and 2010.

• Structural Engineering and Mechanics
• /
• 제37권2호
• /
• pp.215-231
• /
• 2011

As a brittle and heterogeneous material, concrete behaves differently under different stress conditions and its bulk strength is loading rate dependent. To a large extent, the varying behavioural properties of concrete can be explained by the mechanical failure processes at a mesoscopic level. The development of a computational mesoscale model in a general finite element environment, as presented in the preceding companion paper (Part 1), makes it possible to investigate into the underlying mechanisms governing the bulk-scale behaviour of concrete under a variety of loading conditions and to characterise the variation in quantitative terms. In this paper, we first present a series of parametric studies on the behaviour of concrete material under quasi-static compression and tension conditions. The loading-face friction effect, the possible influences of the non-homogeneity within the mortar and ITZ phases, and the effect of randomness of coarse aggregates are examined. The mesoscale model is then applied to analyze the dynamic behaviour of concrete under high rate loading conditions. The potential contribution of the mesoscopic heterogeneity towards the generally recognized rate enhancement of the material compressive strength is discussed.

• 전력전자학회논문지
• /
• 제6권1호
• /
• pp.82-89
• /
• 2001

본 논문은, HVDC 시스템의 인버터 제어기 및 고조파 필터의 설계를 위하여 동특성 및 정상상태 특성을 해석하는 방법을 제시한다. EMTP 시뮬레이션을 이용하면, 동특성 분석이 가능하며, 정상상태 특성의 분석은필터와 부하를 고려한 조류해석을 수행함으로써 가능하다. 또한 본 논문은 HVOC 시스템의 정적 및 동적 특성 분석이 가능한 단상 등가회로를 제안한다. 이 단상 등가회로에서 인버터는 스위치의 소호에 따른 전류원으로 취급된다. 또한 필터설계에 사용되고 있는 각종 목적함수를 단상 등가회로룹 이용하여 구할 수 있다, 본 논문은 전압의 고조파 성분 및 필터의 전력손실을 고려한 목적함수를 이용하여 펄터를 최적화하는 과정이 제시되어 있다.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.619-628
• /
• 2001

A viscoelastic constitutive equation of rubber is proposed under small oscillatory load superimposed on large static deformation. The proposed model is derived through linearization of Simos nonlinear viscoelastic constitutive model and reference configuration transformation. Statically pre-deformed state is used as reference configuration. The model is extended to a generalized viscoelastic constitutive equation including widely-used Mormans model. Static deformation correction factor is introduced to consider the influence of pre-strain on the relaxation function. The model is tested for dynamic behavior of rubbers with different carbon black fractions. It is shown that the constitutive equation with static deformation correction factor agrees well with test results.

• 동력기계공학회지
• /
• 제21권2호
• /
• pp.57-63
• /
• 2017

The large-eddy simulation(LES) was carried out to evaluate the drag and static pressure acting on the blade surface of a small-size axial fan(SSAF) under the condition of unsteady-state, incompressible fluid and three-dimensional coordination. The axial component of drag coefficient increases with the increase of operating load, but the radial components have negligible sizes regardless of operating loads. Otherwise, the static pressures acting on the blade surfaces of SSAF show different distributions around the operating point of D equivalent to the stall. Also, with the increase of operating load, the static pressures acting on the pressure and suction surfaces of blade concentrate at the tips and leading-edges as a whole.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.106-113
• /
• 2004

Most of mechanical structures are composed of many substructures connected to one another by various types of mechanical joints. In automotive engineering, it is important to study these connected structures under various dynamic forces for the evaluations of fatigue life and stress concentration exactly. In this study, the dynamic response of vehicle structure to external forces is classified an inverse problem involving strains from the experiment and the analysis. The practical dynamic forces are determined by the combination of the analytical and experimental method with analyzed strain by quasi-static finite element analysis under unit force and with measured strain by a strain gage under driving load, respectively. In a stressed body, inter-molecular chemical bonds are failed beyond the certain magnitude. The failure of molecular structure in material is considered as a time process of which rate is determined by mechanical stress. That is, the failure of inter-molecular chemical bonds is the fatigue lift of material. This kinetic concept is expressed as lethargy coefficient. And S-N curve is obtained with the lethargy coefficient from quasi-static tensile test. Equivalent practical dynamic force is obtained from the identification of practical dynamic force for one loading point. Using the practical dynamic force and S-N curve, fatigue life of a window pillar is analyzed with FEM under the identified force by the procedure of above mentioned.