• 대한환경공학회지
• /
• 제22권10호
• /
• pp.1869-1879
• /
• 2000

혐기성 소화공정 중 생성되는 주요 중간대사산물인 프로피온산의 분해대사에 대한 연구중 에탄올과의 산화 환원 반응인 coupling 반응으로써 혐기성 소화공정에서 프로피온산 축적을 저감시킬 수 있는 연구를 수행하였다. 따라서, 본 연구는 혐기성 공정에서 프로피온산의 전환에 따른 동력학적 반응과 에탄올과의 상호 반응에 따른 특정기질 선호영향을 모델에 적용하여 살펴보았다. 본 연구는 4단계의 실험으로 수행되었다. 1, 2, 3단계는 각기 다른 기질에 순화된 미생물들을 이용하여 프로피온산 1 g COD/L와 에탄올의 농도를 각각 0, 100, 200, 400과 1,000 mg/L로 주입하여 프로피온산과 에탄올의 혐기성 분해과정을 비교 연구하였으며, 4단계에서는 Glu-MCR과 HPr-MCR의 순화미생물의 혼합비를 조절하여 프로피온산 1 g COD/L를 주입하였을 때의 혐기성 분해를 연구하였다. 본 연구에서는 수정된 경쟁적 모델을 이용하여 특정기질 선호현상을 규명하였고, 에탄올 농도의 증가에 따라 아세트산 형성반응의 $K_{s2}$값의 증가와 메탄화 과정에서의 아세트산 생성 및 분해과정에 해당되는 $K_3$값이 일부 증가하는 결과를 얻을 수 있었다. 또한 순화미생물들에 따라 프로피온산과 에탄올의 분해에 미치는 영향이 다른 결과를 얻을 수 있었다.

• 동의신경정신과학회지
• /
• 제25권1호
• /
• pp.1-12
• /
• 2014

Objectives: In this study, the meditation programs (${\alpha}$ version), which are properly coordinated according to the motion, breathing, and relaxation, are evaluated and researched upon to have positive effects on stress and in the area of psychology. Methods: Approved by the Clinical Trials Deliberation Committee in Oriental Medicine, Dongguk University, Ilsan Hospital, this study collected data according to the applicant's consents, demographic information and anthropometry for the Sasang Constitutional diagnosis. Sasang Constitutional diagnosis measured the beta tools by Institute of Oriental Medicine and a decision tree was made for the Sasang Constitutional questionnaires. The STAI, STAXI, BDI, and HRV were measured before and after the meditation in order to compare the effects of meditation according to Sasang Constitution. The HRV was used as a ProComP KM Tech (co). Results: 1) The positive changes available in the Time-domain analysis of heart rate variability assessment showed that the peace of mind is increased. By analyzing the Sasang constitution, So-eum In's peace of mind included a physical stability of the autonomic nervous system. 2) According to the psychological scale evaluation, each depression scale, trait anger, anger-in, state anxiety and trait anxiety index proved significantly positive effects. By analyzing the Sasang constitution, Eun-In which involved So-eum In and Tae-eum In, had positive effects. 3) The psychological scale changed the group of diagnosed depression or anxiety, it did not mean that the psychological scale changes in the depression group, but the index of the anxiety group had been significantly reduced. This program had clinical effects for anxious patients and Eum-In which involved Tae-eum In and So-eum In according to the analysis of Sasang constitution. 4) Correlations between the gender of each psychological scale showed that women have overall low correlations, but, there were no significant changes. Conclusions: The meditation program developed by adequately mixing Action, relaxation and breathing shows that it is effective for overall Eum-in physical and mental relaxation and concentration. In the future, It will have to be developed Meditation program to show the same effect for all people.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.105-105
• /
• 2009

$ZrO_2$ is one of the most attractive high dielectric constant (high-k) materials. As integrated circuit device dimensions continue to be scaled down, high-k materials have been studied more to resolve the problems for replacing the EY31conventional $SiO_2$. $ZrO_2$ has many favorable properties as a high dielectric constant (k= 20~25), wide band gap (5~7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2/Si$ structure. In order to get fine-line patterns, plasma etching has been studied more in the fabrication of ultra large-scale integrated circuits. The relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Due to the easy control of ion energy and flux, low ownership and simple structure of the inductively coupled plasma (ICP), we chose it for high-density plasma in our study. And the $BCl_3$ included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compound In this study, the surface kinetic properties of $ZrO_2$ thin film was investigated in function of Ch addition to $BCl_3/Ar$ gas mixture ratio, RF power and DC-bias power based on substrate temperature. The figure 1 showed the etch rate of $ZrO_2$ thin film as function of gas mixing ratio of $Cl_2/BCl_3/Ar$ dependent on temperature. The chemical state of film was investigated using x-ray photoelectron spectroscopy (XPS). The characteristics of the plasma were estimated using optical emission spectroscopy (OES). Auger electron spectroscopy (AES) was used for elemental analysis of etched surface.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권12호
• /
• pp.1719-1724
• /
• 2016

The objective of this study was to determine the effects of physically effective neutral detergent fiber (peNDF) content in total mixed ration (TMR) on dry matter intake, digestibility, and chewing activity in fattening Hanwoo (Bos taurus coreanae) heifers. The experiment was designed as a replicated $3{\times}3$ Latin square using 12 heifers. Fattening heifers were offered one of three diets [high (T1), medium (T2), and low (T3) peNDF] obtained by different mixing times (3, 10, and 25 min) for the same TMR feed. The peNDF content of TMR was determined by multiplying the proportion of dry matter retained by a 1.18 mm-screen in a Penn State Particle Separator by the dietary NDF content. The $peNDF_{1.18}$ content was 30.36%, 29.20%, and 27.50% for the T1, T2, and T3 diets, respectively (p<0.05). Dry matter intake was not affected by peNDF content in TMR. Total weight gain in T1 group was significantly higher (p<0.05) than in T2 and T3 groups. However, weight gain did not differ between T2 and T3 groups. The feed conversion ratio decreased with an increase in the peNDF content (T1: 12.18, T2: 14.17, and T3: 14.01 g/g). An increase in the peNDF content of TMR was associated with a linear increase in the digestibility of dry matter, crude protein, crude fiber, neutral detergent fiber, and acid detergent fiber (p<0.05). Also, an increase in peNDF content of the TMR resulted in a linear increase in the number of chews in eating and ruminating (p<0.05), and consequently in the number of total chews (p<0.05). These results indicate that peNDF content affects digestibility and chewing activity. Consequently, the peNDF content of TMR should be considered for improving feed efficiency, digestibility, body weight gain, and performance in fattening heifers.

• Restorative Dentistry and Endodontics
• /
• 제27권6호
• /
• pp.632-643
• /
• 2002

The purpose of this study was two-fold. First was to evaluate whether the molecular sieving model was appropriate for ionic dissociation experiment. Second was to compare the dissociation of calcium and hydroxyl ions from five types of calcium hydroxide pastes (Pure calcium hydroxide paste, DT temporary $dressing^{\circledR},{\;}Metapaste^{\circledR},{\;}Chidopex^{\circledR},{\;}Metapex^{\circledR}$) in three vehicles (aqueous, viscous and oily) and the antibacterial effect. Each calcium hydroxide pastes was placed into 0.65ml tube with cap and then 15% polyacrylamide gel was placed onto calcium hydroxide pastes. After the gel was hardened, the tubes were filled with tridistilled water (pH 7.14) and closed with cap. The tubes were stored in $37^{\circ}C$ 100% incubator The pH reading and the concentration of calcium ions were taken at 1, 4, 7. 10, and 14 days. The brain heart infusion agar plates with S. mutans and A. actinomycetemcomitans were used far antibacterial activity test. Middle of agar plate was filled with the calcium hydroxide pastes. The plates were incubated at $37^{\circ}C$ and observations were made to detect the zones of inhibition. These data were evaluated statistically by use of the analysis of variance and duncan test. The results were as follows. 1. In fresh mixing state, the pH of five types of calcium hydroxide pastes were measured between 12.5 and 12.8. 2. The pH was increased in all five types of calcium hydroxide pastes compared with control group. In 14 days, Pure calcium hydroxide paste (11.45) and DT temporary $dressing^{\circledR}$ (11.33) showed highest pH, followed by $Metapaste^{\circledR}$ (9.49), $Chidopex^{\circledR}$ (8.37) and $Metapex^{\circledR}$ (7.59) 3. Calcium was higher in all five types of calcium hydroxide pastes compared with control group. In 14 days, Pure calcium hydroxide paste (137.29 mg%) and DT temporary $dressing^{\circledR}$ (124.6 mg%) showed highest value, followed by $Metapaste^{\circledR}$ (116.74 mg%), $Chidopex^{\circledR}$ (111.84 mg%) and $Metapex^{\circledR}$ (60.22 mg%). 4. The zones of bacterial inhibition were seen around all five types of calcium hydroxide pastes. $Chidopex^{\circledR}{\;}and{\;}Metapex^{\circledR}$ groups which include iodoform were observed significantly larger zone of inhibition in A. actinomycetemcomitans compared with the other calcium hydroxide groups (p<0.05) However, $Metapex^{\circledR}$ showed the least antibacterial effect on S. mutans compared with other groups (p<0.05). The molecular sieving model was found to be acceptable in dissociation experiment of hydroxyl and calcium ions when compared with the previous tooth model study. But this model was not appropriate for the antibacterial test.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1639-1645
• /
• 1991

Because of the important role LD converters play in the production of high quality steel, various dynamic models have been attempted in the past by many researchers not only to understand the complex chemical reactions that take place in the converter process but also to assist the converter operation itself using computers. And yet no single dynamic model was found to be completely satisfactory because of the complexity involved with the process. The process indeed involves dynamic energy and mass balances at high temperatures accompanied by complex chemical reactions and transport phenomena in the molten state. In the present study, a mathematical model describing the dynamic behavior of LD converter process has been developed. The dynamic model describes the time behavior of the temperature and the concentrations of chemical species in the hot metal bath and slag. The analysis was greatly facilitated by dividing the entire process into three zones according to the physical boundaries and reaction mechanisms. These three zones were hot metal (zone 1), slag (zone 2) and emulsion (zone 3) zones. The removal rate of Si, C, Mn and P and the rate of Fe oxidation in the hot metal bath, and the change of composition in the slag were obtained as functions of time, operating conditions and kinetic parameters. The temperature behavior in the metal bath and the slag was also obtained by considering the heat transfer between the mixing and the slag zones and the heat generated from chemical reactions involving oxygen blowing. To identify the unknown parameters in the equations and simulate the dynamic model, Hooke and Jeeves parttern search and Runge-Kutta integration algorithm were used. By testing and fitting the model with the data obtained from the operation of POSCO #2 steelmaking plant, the dynamic model was able to predict the characteristics of the main components in the LD converter. It was possible to predict the optimum CO gas recovery by computer simulation

• 공업화학
• /
• 제20권5호
• /
• pp.493-499
• /
• 2009

본 실험에서는 탄소나노튜브(CNT) 및 나노클레이(clay)가 포함된 폴리스티렌(PS) 및 스티렌계 공중합체 나노복합재료의 물성에 대해 연구하였다. 스티렌계 공중합체의 공단량체(comonomer)로는 vinylbenzyl trimethyl ammonium chloride(VTAC)를 사용하여 스티렌/VTAC 공중합체(SVTAC)를 유화중합에 의해 제조하였다. 이와 같이 제조한 폴리스티렌 및 SVTAC 공중합체 에멀젼에 CNT와 clay를 종류 및 함량을 변화시키면서 혼합하는 방법으로 나노복합재료를 제조하였다. PS/CNT 나노복합재료 보다 공단량체를 첨가하여 제조한 SVTAC/CNT 나노복합재료가 더 높은 전기 전도도를 나타내었다. 또한 유화중합시 유화제의 함량을 증가시켜서 제조한 경우에 더 좋은 전기 전도도를 얻을 수 있었다. 이것은 공단량체와 유화제가 CNT 분산 및 전기전도에 긍정적으로 작용하였기 때문이라 생각된다. 나노복합재료 내에서의 CNT의 분산을 알아보기 위하여 TEM을 사용하여 분석한 결과 comonomer의 첨가 및 유화제의 함량이 나노복합 재료 내에서 CNT의 최종 분산에 영향을 미치는 것을 확인하였다. 또한 열적 및 동역학적 물성들을 DSC와 DMA로 측정하여 comonomer 및 유화제의 함량, clay 및 CNT의 첨가가 나노복합체의 물성에 어떠한 영향을 주는지에 대해 조사하였다.

• 한국세라믹학회지
• /
• 제39권9호
• /
• pp.822-828
• /
• 2002

$ZrO_2$ 첨가량 변화에 따른 전기적 특성과 고주파 대용량 세라믹 캐패시터 제조공정 조건을 규명하기 위하여 고주파 대용량 세라믹 캐패시터의 제조 및 전기적 특성에 관하여 연구하였다. 단위 캐패시터는 테이프 캐스팅법으로 제조되었으며, 유전체 및 바인더의 최적조성은 57.5∼60.0: 42.5∼40.0 wt%이다. 슬러리의 점도는 4000∼5000 cps이며, 이 슬러리를 사용하여 제조한 그린 테이프는 뛰어난 캐스팅 상태를 유지하고 있다. 80$^{\circ}C$에서 200 kg/$cm^2$의 성형압으로 성형함으로서 최적의 적층 상태를 얻을 수 있었다. 단위 캐패시터의 전기적 특성, 특히 절연파괴 특성을 증진시키기 위하여 $ZrO_2$를 첨가하였다. $ZrO_2$ 첨가량이 1 wt%에서부터 5 wt%까지 첨가한 경우에는 단위 캐패시터의 유전상수 및 유전손실에 큰 영향을 미치지 못하였다. 또한 유전상수도 10 kHz에서 500 kHz 사이의 주파수 범위에서 큰 변호가 없었다. 내전압은 3 wt%를 첨가한 경우 $CaZrO_3$에 형성 및 입자크기 감소로 인하여 증진됨을 확인할 수 있었다.

• 대한원격탐사학회지
• /
• 제29권4호
• /
• pp.415-421
• /
• 2013

본 연구에서는 다파장 라만 라이다 시스템을 이용하여 대기 중의 비구형 순수 황사입자와 구형 오염 입자가 혼합된 황사 입자의 단산란 알베도를 산출할 수 있는 방법론을 제시하고, 실제 대기 관측 사례 분석 자료로부터 정확도를 검증하고자 하였다. 편광소멸도는 황사와 비황사와의 혼합정도에 반비례함을 응용하여 편광소멸도 값으로부터 황사비를 산출하고 이를 이용하여 황사와 비황사로 황사층을 구분하였다. 산출된 비황사의 두 파장(355, 532 nm)의 소산계수와 세 파장(355, 532, 1064 nm)의 후방산란계수를 이용하여 역행렬 분석을 수행하여 비황사의 고도별 단산란알베도를 도출하였다. 황사와 비황사의 가중치를 소산계수값으로부터 산출하고 각 가중치를 황사와 비황사에 적용하여 황사 층 전체의 고도별 단산란알베도를 산출하였다. 단, 황사의 단산란알베도는 순수황사로 가정하여 발원지에서 측정된 순수황사가 나타내는 0.96의 값을 적용하였다. 본 연구로부터 개발된 분석방법은 기존의 원격탐사 기술의 한계점을 극복하여 황사의 이동시 타 오염입자와의 혼합에 따른 광학적 특성의 변화에 대한 정밀한 자료를 제공할 수 있을 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제32권2호
• /
• pp.165-173
• /
• 2019

Lithium anodes (13, 15, 17, and 20 wt% Li) were fabricated by mixing molten lithium and iron powder, which was used as a binder to hold the molten lithium, at about $500^{\circ}C$ (discharge temp.). In this study, the effect of applied pressure and lithium content on the discharge properties of a thermal battery's single cell was investigated. A single cell using a Li anode with a lithium content of less than 15 wt% presented reliable performance without any abrupt voltage drop resulting from molten lithium leakage under an applied pressure of less than $6kgf/cm^2$. Furthermore, it was confirmed that even when the solid electrolyte is thinner, the Li anode of the single cell normally discharges well without a deterioration in performance. The Li anode of the single cell presented a significantly improved open-circuit voltage of 2.06 V, compared to that of a Li-Si anode (1.93 V). The cut-off voltage and specific capacity were 1.83 V and $1,380As\;g^{-1}$ (Li anode), and 1.72 V and $1,364As\;g^{-1}$ (Li-Si anode). Additionally, the Li anode exhibited a stable and flat discharge curve until 1.83 V because of the absence of phase change phenomena of Li metal and a subsequent rapid voltage drop below 1.83 V due to the complete depletion of Li at the end state of discharge. On the other hand, the voltage of the Li-Si anode cell decreased in steps, $1.93V{\rightarrow}1.72V(Li_{13}Si_4{\rightarrow}Li_7Si_3){\rightarrow}1.65V(Li_7Si_3{\rightarrow}Li_{12}Si_7)$, according to the Li-Si phase changes during the discharge reaction. The energy density of the Li anode cell was $807.1Wh\;l^{-1}$, which was about 50% higher than that of the Li-Si cell ($522.2Wh\;l^{-1}$).