• The Transactions of the Korea Information Processing Society
• /
• v.1 no.3
• /
• pp.391-397
• /
• 1994

In this paper, we have developed a PLD Designer which is a design tool for digital circuits design using PLD device. PLD designer consists of a state graphic editor to extract boolean equations from state table within 20 states of FSM and a pin map editor to assign pin map for PLD device(PAL16R4, PAL22V10, GAL16V8, etc), which is suitable for extracted boolean equations. Also pin map editor generates a necessary JEDEC file to implement PLD device by using fuse map and checksum algorithm. To verify extracted boolean equation, we have developed simulation test vector generation algorithm. The results of JEDEC files generated by PLD designer is same with the results of JEDEC files generated by PALASM.

• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.699-715
• /
• 2015

A modal parameter based damage sensitive feature (DSF) is defined to mimic the relative change in any diagonal element of the stiffness matrix of a model of a structure. The damage assessment is performed in a statistical pattern recognition framework using empirical complementary cumulative distribution functions (ECCDFs) of the DSFs extracted from measured operational vibration response data. Methods are discussed to perform probabilistic structural health assessment with respect to the following questions: (a) "Is there a change in the current state of the structure compared to the baseline state?", (b) "Does the change indicate a localized stiffness reduction or increase?", with the latter representing a situation of retrofitting operations, and (c) "What is the severity of the change in a probabilistic sense?". To identify a range of normal structural variations due to environmental and operational conditions, lower and upper bound ECCDFs are used to define the baseline structural state. Such an approach attempts to decouple "non-damage" related variations from damage induced changes, and account for the unknown environmental/operational conditions of the current state. The damage assessment procedure is discussed using numerical simulations of ambient vibration testing of a bridge deck system, as well as shake table experimental data from a 4-story steel frame.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1989.04a
• /
• pp.66-70
• /
• 1989

Methods for identification of modal properties of linear structures are presented. The extended Kalman filtering technique is empolyed. The state equation is formulated by two different ways, namely by the time domain and frequency domain approaches. Verifications are carried out by using simulated records of ground acceleration and structural response. Then the techniques are applied to the estimation of modal parameters of a scaled model for a 3-story building which is installed on a shaking table.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.177-180
• /
• 2000

An algorithm for modeling of yeast fermentation process using genetic-fuzzy algorithm is presented in this work. The algorithm involves developing the fuzzy modeling of the process and model update capability against the system change. The membership functions of state variables and specific rates and the decision table were generated using genetic algorithm. This algorithm could replace the complex mathematical model to simple fuzzy model and cope with the change of process characteristics well.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1877-1880
• /
• 2003

We were interest in Deburring using MAF(magnetic abrasive finishing) method. So Magnetic inductor was designed and manufactured to generate proper magnetic induction fer deburring the burr formed in drilling SM45C. We experienced according to the Rotational speed, table feed rate, grain size of powder and working gap are changed to investigate the effect on deburring. At this time we experienced in abrasive effect mainly.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.241-244
• /
• 2002

Deburring is conducted using MAF(magnetic abrasive finishing) method. Magnetic inductor is designed and manufactured to generate proper magnetic induction far deburring the burr formed in drilling SM45C. Rotational speed, table feed rate, grain size of powder and working gap are changed to investigate the effect on deburring.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.165-173
• /
• 1995

In order to eliminate position errors existing at the steady state in the motion control of robotic maniprlators, a new fuzzy control algorithm is proposed using three variables, position error, velocity error and integral of position errors as input variables of the fuzzy controller, This controller is applied to the tracking control of robotic manipulators in Cartesian space. Three dimensional look-up table is used to reduce the computational time in rel-time control. Simulation and experimental studies are conducted to evaluate the control performance for the two axis direct drive SCARA robot system.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.180-185
• /
• 1995

In this paper, we designed the speed controller with high accuracy and speedy steady-state response, in Induction motor control system, Fuzzy P-1 controller of Induction motor using Microprocessor have an appropriate fuzzy rule matrix (which is 2-separate Look-up Table) The usefulness of proposed fuzzy P-1 controller will be confirmed by experiments which we compare with conventional P-1 controller.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1591-1594
• /
• 2010

NAND 플래시 메모리 기반의 Solid State Disk (SSD)의 내부에는 Flash Translation Layer (FTL)이라는 소프트웨어가 사용되고 있다. FTL은 파일 시스템으로부터 요청되는 논리 주소를 플래시 메모리의 물리 주소로 변환하며 이를 위하여 사상 테이블을 사용한다. 사상 테이블의 빠른 접근을 위하여 사상 테이블은 SSD 내부의 RAM에 유지하는데 SSD의 용량이 커지게 되면 사상 테이블로 인해 요구되는 RAM의 크기도 커지는 문제점이 있다. 본 논문에서는 FTL의 사상 테이블을 페이지 단위로 나누어 필요할 때마다 RAM에 적재하는 다단계 사상 테이블 기법을 연구하였다.

• Journal of KIISE:Software and Applications
• /
• v.30 no.11
• /
• pp.1054-1061
• /
• 2003

Q-Learning, a representative algorithm of reinforcement learning, experiences repeatedly until estimation values about all state-action pairs of state space converge and achieve optimal policies. When the state space is high dimensional or continuous, complex reinforcement learning tasks involve very large state space and suffer from storing all individual state values in a single table. We introduce Q-Map that is new function approximation method to get classified policies. As an agent learns on-line, Q-Map groups states of similar situations and adapts to new experiences repeatedly. State-action pairs necessary for fine control are treated in the form of rule. As a result of experiment in maze environment and mountain car problem, we can achieve classified knowledge and extract easily rules from Q-Map