• Title/Summary/Keyword: State Operation

Search Result 2,921, Processing Time 0.031 seconds

A Study of The Effect of Waiting time for Operation in the Operating Room on Preoperative Patients (수술환자에 있어 수술실내에서 수술대기 시간이 불안에 미치는 영향에 관한 연구)

  • Lee, Hea-Won;Lee, Kyu-Chung;Kim, Hae-Ock;Lee, Haik-Ock;Kim, Hea-Suk;Lee, Mi-Kyung;Song, Mal-Soon
    • The Korean Nurse
    • /
    • v.29 no.3
    • /
    • pp.36-48
    • /
    • 1990
  • This study was attempted to provide us with basic information on how to improve understanding with patients for operation, and to offer then better nursing and treatment. This kind of study will help scientific application to nursing practice and operating room. The data was collected by interviewing 29 patients who underwent the elective surgery under the general anesthesia at Y hospital in Seoul. The interview ran from October 15 to December 15, 1989. The research instrument was a anxiety measurement device (SAAI) originally developed by Spielberger, et al and modified by Jung-Tack Kim. 1. Hypothesis Testing Hypothesis one was that there would be a difference in state anxiety level according to a time difference in watiting for operation. This hypothesis was rejected(state.anxiety level one hour before operation P>.05, r-.747, State anxiety level half an hour before operation P>.05, r-.1550, state anxiety level just before operation, P>.05, r=.1099). However, state anxiety, evel appeared to be associated with a longer watiting period, like one day before operation (P<.05, r-.4628). Hypothesis two was that there would be a difference according to state anxiety level of patients for operation. This was rejected. (Change of blood perssure in systolie P>.05 r=.1082, Change of blood pressure in diastolic P>.05, r=.088, Change of pulse rate, P>.05, r-1.909) 2. Examining trait anxiety and state anxiety levels, the average level of trait anxiety was 42.034, and the average level of state anxiety one day before operation was 43,000. The average level of state anxiety was averaged 42.356 in a waiting room for operation. 3. Examining the state anxiety level by time period, the one hour before was 42.379 the level half an hour before 42.276, and the level just before operation 42.414. The low level of state anxiety was due to the fact that premedication was not eliminated. 4. Age and time period like one day before operation was related to state anxiety level (F=5.271, P<.0.01) and blood pressure in waiting room for operation. That is, state anxiety level and blood pressure of patients one day before operation appeared high. Sex was relation to changes of blood pressure ; the blood pressure of male patients appeard higer than of female patients. A marital status was also related anxiety level one hour before operation the married patient for operation showed a higher state anxiety level than that of the unmarried patient for operation. Education was similarily related to trait anxiety level in which highly educated patients show lower levels of trait anxiety than poorly educated ones. Motive for hospitalization was related to state anxiety level for patient one hour before operation (F=6.464, P<.05) likewise, patients who are supposed to undergo operation hastily showed higher levels of anxiety than patients who expect elective surgeries.

  • PDF

Comparison of Surgical Patients’State Anxiety by Sex, Area of Operation, and Family Planning (성별, 수술부위, 출산계획이 다른 수술환자의 상황-불안 비교)

  • 박상연
    • Journal of Korean Academy of Nursing
    • /
    • v.9 no.1
    • /
    • pp.9-22
    • /
    • 1979
  • The major purpose of this study was to compare the state anxiety of surgical patients by sex (male/female), area of operation (sex-organ/non sex-organ), and family planning (having the plan of child-bearing/having no plan of child-bearing). One hundred sixty patients who were to get surgical operation were equally divided into eight groups resulted from combination of variables of sex, area of operation, and family planning, The state anxiety of surgical patients was measured in terms of the discrepancy score between the state anxiety score on the State-Trait Anxiety Inventory (STAI) administered at a day before operation and the trait anxiety score on it which was administered at a day before discharge. In order to test statistically the differences among meant scores of the state anxiety obtained by eight groups, multiple comparisons were carried out by Scheffe method. The results of this study led to the conclusions that, (1) there was no significant sex difference in the state anxiety of surgical patients, when the area of operation and the family planning variables were disregarded, (2) the state anxiety of patients who were to get operation of their sex-organ was significantly higher than that of patients who were to get operation on the parts other than their sex-organ, when variables of the sex and the family planning were not taken into account, (3) there was no significant sex difference in the state anxiety of patients who were to Bet operation on the parts other than their sex-organ, when the family planning variable was disregarded, (4) the state anxiety of female patients who were to get operation on their sex-organ was significantly higher than the stale anxiety of male patients who were to get operation on their sex-organ, when the family planning variable was not taken into account.

  • PDF

Active Short Circuit Control Method to Reduce Overcurrent and Oscillation Current in PMSM (영구자석 동기모터 진동 및 과전류 저감을 위한 능동단락회로 제어 기법)

  • Choi, Jong-Won;Kim, Yoon-Jae
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.27 no.4
    • /
    • pp.339-347
    • /
    • 2022
  • This study proposes the mitigation method for overcurrent and oscillation motor current in an active short-circuit operation. This operation is attracting attention as the safe state of electric vehicle traction inverters. However, the active short-circuit operation generates oscillation and overcurrent of motor currents during a transient state. The proposed method uses two different safe states in PMSM, such as active short circuit and freewheeling. The active short circuit is used for safe state in a steady state. To reduce the overshoot and oscillation, a freewheeling state is injected between active short-circuit operation by comparing the motor phase current with an analytically calculated steady-state motor current. Freewheeling state is only used in a transient state. The performance is demonstrated through simulations and experimental results. The peak current of the motor was reduced from 52 A to 40 A, and oscillation time was reduced.

Development of Wireless Communication Based Operation State Monitoring System for Open Rack Vaporizer (무선 통신 기반 해수식 기화기 운영 상태 모니터링 시스템 개발)

  • Yoo, Seung-Yeol;Joen, Ming-Sung;Lee, Jae-Chul;Kang, Dong-Hoon;Kim, Dong-Goen;Lee, Soon-Sup
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.59 no.5
    • /
    • pp.280-287
    • /
    • 2022
  • An open rack vaporizer is a facility that vaporizes liquefied natural gas using sea water. When a vaporization efficiency of the open rack vaporizer decreases, liquefied natural gas can leak, which can cause great damage to the facility. Operators have to monitor the operation state of the facility in real-time to prevent the accident. However, operators have visited the site and have checked the state by looking at the value of sensors installed in the open rack vaporizer through indicators. For the safe operation of the open rack vaporizer, a monitoring system is needed to monitor the operation state of the open rack vaporizer in real-time without the need for operators to visit the site. In this paper, we developed a long term evolution based monitoring system to monitor the operation state of the open rack vaporizer. The developed system can monitor the real-time operation state of the open rack vaporizer at a control center far from the facility. For the system development, data transmission infrastructure using long term evolution was built. Afterwards a software was developed to monitor the operation state of the open rack vaporizer in real-time using the transmitted data. Finally, performance evaluation was conducted to confirm that the developed system operated successfully without data transmission delay or data missing.

The Effects of the Video Education Program on the Residual urine, Gas Passing and State Anxiety of Hysterectomy Patients (동영상 교육 프로그램이 자궁적출술 환자의 잔뇨량, 가스배출 및 상태불안에 미치는 효과)

  • Kang, Gyeong-Sook;Jun, Eun-Mi
    • Women's Health Nursing
    • /
    • v.16 no.4
    • /
    • pp.409-418
    • /
    • 2010
  • Purpose: The purpose of this study was to identify the effects of a pre-operation video assisted education program on residual urine, gas passing and state anxiety in women undergoing hysterectomy. Methods: Nonequivalent control group non-synchronized design was used for the study. In the research, video assisted education program was applied to the experimental group while a similar conventional education was done to the control group. The pre-operation state anxiety and post-operation residual urine and gas discharge of both the groups were measured. The data were analyzed using SPSS. Results: The experimental group was significantly higher than control group on gas passing (t=3.04, p=.00). However the residual urine (t=0.34, p=.73) and state anxiety (t=0.81, p=.82) did not make significant differences. Conclusion: This study is very meaningful in that it developed and provided a nursing intervention can positively affect hysterectomy patients. The pre-operation video assisted education program may be an effective nursing intervention that is clinically practical and useful to reduce time of the gas passing of hysterectomy patients after the operation.

A framework for modelling and operation management of robotic assembly cells via knowledge base (지식베이스를 이용한 로보틱 조립셀의 모델링과 운영관리를 위한 프레임 워크)

  • 김대원;고명삼;이범희
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1988.10a
    • /
    • pp.374-379
    • /
    • 1988
  • We propose a framework for modelling and operation management of robotic assembly cells via knowledge base. In the framework, each component of the cell is considered as a state variable, the relations among the state variables are stored in state transition maps(STMs) and then transformed into the form of knowledge. The assembly job tree(AJT) which includes the precedence relations and the constraints for assembly tasks is also described. Finally, an algorithm is presented to manage the cell operation.

  • PDF

Study on Multi-scale Unit Commitment Optimization in the Wind-Coal Intensive Power System

  • Ye, Xi;Qiao, Ying;Lu, Zongxiang;Min, Yong;Wang, Ningbo
    • Journal of Electrical Engineering and Technology
    • /
    • v.8 no.6
    • /
    • pp.1596-1604
    • /
    • 2013
  • Coordinating operation between large-scale wind power and thermal units in multiple time scale is an important problem to keep power balance, especially for the power grids mainly made up of large coal-fired units. The paper proposes a novel operation mode of multi-scale unit commitment (abbr. UC) that includes mid-term UC and day-ahead UC, which can take full advantage of insufficient flexibility and improve wind power accommodation. First, we introduce the concepts of multi-scale UC and then illustrate the benefits of introducing mid-term UC to the wind-coal intensive grid. The paper then formulates the mid-term UC model, proposes operation performance indices and validates the optimal operation mode by simulation cases. Compared with day-ahead UC only, the multi-scale UC mode could reduce the total generation cost and improve the wind power net benefit by decreasing the coal-fired units' on/off operation. The simulation results also show that the maximum total generation benefit should be pursued rather than the wind power utilization rate in wind-coal intensive system.

Analysis of cavity expansion based on general strength criterion and energy theory

  • Chao Li;Meng-meng Lu;Bin Zhu;Chao Liu;Guo-Yao Li;Pin-Qiang Mo
    • Geomechanics and Engineering
    • /
    • v.37 no.1
    • /
    • pp.9-19
    • /
    • 2024
  • This study presents an energy analysis for large-strain cavity expansion problem based on the general strength criterion and energy theory. This study focuses on the energy dissipation problem during the cavity expansion process, dividing the soil mass around the cavity into an elastic region and a plastic region. Assuming compliance with the small deformation theory in the elastic region and the large deformation theory in the plastic region, combined with the general strength criterion of soil mass and energy theory, the energy dissipation solution for cavity expansion problem is derived. Firstly, from an energy perspective, the process of cavity expansion in soil mass is described as an energy conversion process. The energy dissipation mechanism is introduced into the traditional analysis of cavity expansion, and a general analytical solution for cavity expansion related to energy is derived. Subsequently, based on this general analytical solution of cavity expansion, the influence of different strength criterion, large-strain, expansion radius, cavity shape and characteristics of soil mass on the stress distribution, displacement field and energy evolution around the cavity is studied. Finally, the effectiveness and reliability of theoretical solution is verified by comparing the results of typical pressure-expansion curves with existing literature algorithms. The results indicate that different strength criterion have a relatively small impact on the displacement and strain field around the cavity, but a significant impact on the stress distribution and energy evolution around the cavity.

Scaled SONOSFET NOR Type Flash EEPROM (Scaled SONOSFET NOR형 Flash EEPROM)

  • 김주연;권준오;김병철;서황열
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1998.06a
    • /
    • pp.75-78
    • /
    • 1998
  • The SONOSFET Shows low operation voltage, high cell density, anti good endurance due to modified Fowler-Nordheim tunneling as memory charge injection method. In this paper, therefore, the NOR-type Flash EEPROM composed of SONOSFET, which has fast lead operation speed and Random Access characteristics, is proposed. An 8${\times}$8 bit NOR-type SONOSFET Flash EEPROM had been designed and its electrical characteristics were verified. Read/Write/Erase operations of it were verified with the spice parameters of SONOSFETs which had Oxide-Nitride-Oxide thickness of 65${\AA}$-165${\AA}$-35${\AA}$ and that of scaled down as 33${\AA}$-53${\AA}$-22${\AA}$, respectively. When the memory window of the scaled-down SONOSFET with 8V operation was similar to that of the SONOSFET with 13V operation, the Read operation delay times of the scaled-down SONOSFET were 25.4ns at erase state and 32.6ns at program state, respectively, and those of the SONOSFET were 23.5ns at erase state and 28.2ns at program state, respectively.

  • PDF

Diagnosis of Cutting Stability of Portable Automatic Beveling Machine Using Spindle Motor Current (주축 모터를 이용한 포터블 자동 면취기의 가공 안정성 진단)

  • Kim, Tae Young;An, Byeong Hun;Kim, Hwa Young
    • Journal of Sensor Science and Technology
    • /
    • v.31 no.1
    • /
    • pp.57-63
    • /
    • 2022
  • This study describes a system that monitors the tool and cutting state of automatic beveling operation in real time. As a signal for cutting state monitoring, a motor current detected from the spindle drive system of the automatic beveling machine is used to monitor abnormal state. Because automatic beveling is processed using a face milling cutter, the cutting force mechanism is the same as the milling process. The predicted cutting torque is obtained using a cutting force model based on specific cutting resistance. Then, the predicted cutting torque is converted into the spindle motor current value, and cutting state stability is diagnosed by comparing it with the motor current value detected during beveling operation. The experimental results show that the spindle motor current can detect abnormal cutting state such as overload and tool wear during beveling operation, and can diagnose the cutting stability using the proposed equip-current line diagram.