• 한국측량학회지
• /
• 제15권2호
• /
• pp.185-193
• /
• 1997

While close range photogrammetry has been widely applied for static deformation analysis, video cameras have many characteristics that make them the sensors of choice for dynamic analysis of rapidly changing situations. They also have limitations. The aim of this research is to explore the potential of a video system for monitoring dynamic objects. A pilot system consists of two camcorders, VCR, and PC with frame grabber. To estimte the performance of this system for moving objects, a car was imaged covering several phases when starting to drive. The sequential images of a moving car were recorded on VCR. 15 images per second were digitized in an off-line mode by frame grabber. The image coordinates of targets attached to the rear bumper of a car were acquired by IDRISI, and the object coordinates were derived based on DLT. This research suggests that home video cameras, PC, and photogrammetric principles are promising tools for monitoring of the moving objects and vibrations as well as other time dependent situations.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.39-48
• /
• 2012

Risk Assessment to list possible safety disasters and their probability and severity is the starting point for effective safety management on construction project site. However, the safety managers in owners, construction supervisors, contractors, and sub-contractors still have difficulties in judging the priorities of safety activities and preparing responses to each potential safety disasters. Therefore, this study aimed to suggest a systematic method in assessing safety risk prior to commencement with the agreement of stakeholders. FMECA(failure mode effects and criticality analysis) was selected as a main assessment tool and it was modified according to the characteristics of construction projects and trades. Each risk is, firstly, evaluated with occurrence probability, possible loss and impacts to projects, and detections, and then risk priority number(RPN) is calculated. Subsequently, the managers of each stakeholder discuss the types, timing, and responsibilities of responses as a group decision-making process.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1246-1254
• /
• 2008

The land transportation is the most common way to transport passengers as well as freight among other mode of transportations and consequently more likely to be constructed for faster and convenient travel In this regard, the demand for tunnel constructions will be increasing and the safety inside the tunnel will be considered major concern more than ever. In this paper, we show probabilistic methodology to calculate the personal risk of each evacuee starting from a different location in a tunnel on fire. Passenger evacuation time and smoke spread time are both assumed to be continuous random variables having specific distributions. The evacuation of passengers at each location and the safety facilities inside the tunnel are also crucial factors to calculate the probability of death.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.343-346
• /
• 2005

In this paper a power conditioning system suitable for the fuel cell powered off-road vehicle is proposed. The proposed system employs a Proton Exchange Membrane Fuel Cell stack combined with boost converter, a super capacitor module combined with hi-directional buck-boost converter, a 4-quadrant DC chopper and a permanent magnet DC motor. The momentary overload condition occurring during the motor starting is handled by the energy stored in the supercapacitor module. Also, the regenerative energy can be stored in the supercapacitor module by operating the system in either buck or boost mode. This capability gives the system designer the higher flexibility in designing the system and assures the lower cost of the system. The validity and feasibility of the proposed system is proven by the computer simulation.

• 정보와 통신
• /
• 제10권10호
• /
• pp.22-29
• /
• 1993

This paper describes development of a real-time voice recognition dialing system which can recognize around one hundred word vocabularies in speaker independent mode. The voice recognition algorithm is implemented on a DSP board with a telephone interface plugged in an IBM PC AT/486. In the DSP board, procedures for feature extraction, vector quantization(VQ), and end-point detection are performed simultaneously in every 10msec frame interval to satisfy real-time constraints after the word starting point detection. In addition, we optimize the VQ codebook size and the end-point detection procedure to reduce recognition time and memory requirement. The demonstration system is being displayed in MOBILAB of Korea Mobile Telecom at the Taejon EXPO '93.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권12호
• /
• pp.676-681
• /
• 2002

This paper presents the implementation and experimental investigation of sensorless speed control for a variable-speed PMSM(Permanent Magnet Synchronous Motor) in super-high speed compressor operation. The proposed control scheme consists of two different sensorless algorithms to guarantee the reliable starting operation in low speed region and full torque characteristics using the vector control in high speed region. An automatic switching technique between two control modes is proposed to minimize the speed and torque pulsation during the switching instant of control mode. A testing system of 3.3㎾ PMSM has been built and 90% load test results at 7000r/min are presented to examine the feasibility of proposed sensorless control scheme.

• 한국의류학회지
• /
• 제26권5호
• /
• pp.582-593
• /
• 2002

Metal materials have been used in the clothing design on the spirit of ingenious experiment by fashion designers, and they have been put to practical use by several designers who work out a scheme of popular fashion merchandise. This current starting from the 1960s was weakened in the 1980s, but it was appeared with various shapes of metal materials in the 1990s due to a popularity of techno/cyber fashion. Recently, textile engineering technology causes to develop new-materials which are practical and sanitary. The development of fashionable metal materials brings about the popularization of fashion with metal materials, and it induces that mainstream of modem fashion has been changed into designers of pursuing the spirit of ingenious experiment. This study examines the formative characteristics of metal materials that are based on the spirit of ingenious experiment. As a result, it is evaluated that the formative of metal materials shown in modern fashion is futurism, visual concentration, avast-garde, resistance, precious.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.114-121
• /
• 2013

High efficiency operation is required for motors of vehicle to increase fuel efficiency due to the regulation of exhaust gas. This paper presents a control method of fuel pressure to increase fuel efficiency and a sensorless control method of BLDC motor to get higher efficiency than conventional brushed DC motor. Initial rotor position of BLDC motor is detected from current value that is occurred by test voltage pulse and rotor is accelerated by defined sequence to enter sensorless operation mode. The algorithm to control flow rate of fuel pump uses PI controller that is control motor speed to maintain the target fuel pressure commanded by ECU.

• 한국항해학회지
• /
• 제16권1호
• /
• pp.1-12
• /
• 1992

In this study, the self test-system for the marine Gyrocompass was developed and the obtained results are summarized as follows : 1) Utilizing the newly developed self-test system, the time length for observing the transient state of Gyrocompass reading which has been over 4 hours can be reduced to less than 20 minutes. In addition, the dynamic characteristics of the Gyrocompass can be measured within 2 hours after starting the system. 2) Prior test and diagnosis was done by checking all parameters recurrently with period of 2.5minutes. 3) Testing and diagnosis results was shown in graphic mode and could be transmitted to INMARSAT unit using personal computer. 4) The results of the newly designed trouble algorithm for the system was found to be applicable under arbitrary given conditions.

• 한국유통학회지:유통연구
• /
• 제7권1호
• /
• pp.1-20
• /
• 2002

Many of logistics-related research in automobile industry has focused on inbound logistics and procurement. Research into outbound logistics is relatively few. As a starting research into outbound logistics in automobile industry, this paper examined its logistics network problems with three aspects - location strategy, inventory strategy and transportation strategy. We proposed alternatives of logistics network design resolution, and presented three practical scenarios based on those alternatives. Based on interview, on-site visit and internal data collection processes, we identified major domestic outbound logistics problems such as redundant logistics bases, inefficient delivery policy, insufficient inventory capacity, inventory stock quality deterioration, inefficient transportation system, and etc. In order to cope with those problems, we proposed such strategic alternatives as introduction of hub-and-spoke system, integration of logistics bases, introduction of (automatic) parking building, diversification of transportation mode, and etc. At the same time, we constructed three practically executable scenarios based on those ideas. The first is "Center Hub" scenario, the second is "Metropolitan Hub" scenario. The third and last scenario is "Regional Consolidation of Warehouses (distribution centers)".