• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1018-1020
• /
• 2003

Wind-powered generator system converts wind energy into utilized electric energy. Wind power generator is classified into two categories, as horizontal or vertical axis turbine. The former is equipped with yawing mechanism which is subject to set the blade-face towards the wind direction. However, the latter does not need this mechanism, but this system needs a external power for starting. This paper deals with the method how to overcome such trouble and with the analysis of the starting characteristic and a field test with a prototype of the Darrieus wind generator was performed.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.48-53
• /
• 2014

Generally, the usage motor in the vehicle is exposed to highly ambient temperature and large vibration according to repeatedly starting and stopping during very short time. So, in this paper, the rotor shape design was performed to improve demagnetization endurance by considering starting current of Brushless DC Motor (BLDCM) through Finite Element Method(FEM). As a result, the end of Permanent Magnet (PM) in the basic model was occurring a partial irreversible demagnetization by starting current. To solve this problem, the installing flux barrier was limited to flux line on the core. Accordingly, demagnetization endurance and operating characteristics were improved.

• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.80-83
• /
• 2022

This paper proposes an initial rotor polarity detection algorithm of a single-phase permanent magnet synchronous motor (SP-PMSM) related to stable open-loop starting for sensorless operation. Generally, the SP-PMSM needs an asymmetric air-gap structure to can avoid the initial starting failure at zero torque point. Therefore, the rotor polarity information can be obtained by using the DC offset current direction of a stator current through a high frequency voltage injection into an SP-PMSM with an asymmetric air gap. In this paper, the proposed rotor initial polarity detection algorithm is verified through several experimental results.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.217-221
• /
• 2002

Si and ${\alpha}-Si_3N_4$ powder mixtures added with 3 wt% $Y_2O_3$ were reacted under 5 MPa nitrogen pressure. The reaction products contained ${\alpha}-Si_3N_4$ particles with elongated shapes. Length and width of the elongated grains were the maximum when the starting powder mixture of 50 wt% Si - 47 wt% ${\alpha}-Si_3N_4$ and 3 wt% $Y_2O_3$ was used. Aspect ratio of the elongated grains were between 4.4 and 5. When the starting powder mixture contained 70 wt% Si, large particles with irregular shapes appeared. Meanwhile, the reaction did not proceed when the starting powder mixture contained 30 wt% Si and less. The SHS product was easy to crush and the elongated particles obtained from the starting powder mixtures of 40 wt% Si - 57 wt% ${\alpha}-Si_3N_4$ - 3 wt% $Y_2O_3$ and 50 wt% Si - 47 wt% ${\alpha}-Si_3N_4$ - 3 wt% $Y_2O_3$ were good candidates for the seeds.

• 전기학회논문지P
• /
• 제65권2호
• /
• pp.88-93
• /
• 2016

Soft starters are used with large induction motors in blowers, fans, pumps and the crane hoist drives. AC voltage controllers are used as soft starters in induction motors for starting and to adjust its speed. Soft-starter starting system uses phase control method of input electric source through the setting of the thyristor(SCR) firing angle ${\alpha}$, and it can control input electric source stably and continuously from beginning of starting to ending of starting. In this paper, it is verified that power stack of high-voltage with SCR series system possesses dielectric strength and input electric source is controlled stably by phase control. Especially, from the driving experimental of proposed soft-starter operating, a smoothing acceleration and inrush current decrease can be achieved by the series SCR trigger.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.157-166
• /
• 1989

The effect of pH variation in starting solution on the characteristics of hydroxyapatite precipitates and powder prepared by the wet method was investigated. Hydroxyapatite precipitates was agglomerated, the average agglomerated particle size was decreased in the range from 2 to 6${\mu}{\textrm}{m}$ with increasing pH values in starting solution. The aspect ratio of rod-shaped hydroxyapatite particle was rapidly increased at pH 11 and 11.5. The maximum specific surface area, 91.1$m^2$/g, was at pH 10.5. Dried powder prepared at high pH values contained more minutes CO2 than that prepared at low pH values. The poor crystallinity was maintained up to $600^{\circ}C$ regardless of the pH values in starting solutions. However, the second phase or high crsytalline hydroxypatite phase appeared above 80$0^{\circ}C$. In pH 9.5 and pH 10, $\beta$-whitlockite transformed to $\alpha$-whitlockite at 120$0^{\circ}C$, while in pH 10.5-11.5, hydroxyapatite phase was maintained up to 120$0^{\circ}C$.

• 한국자기학회지
• /
• 제27권2호
• /
• pp.70-75
• /
• 2017

단상 SRM은 자기동이 어려운 관계로 다양한 방법으로 자기동을 실현시키려는 연구가 진행되고 있다. 보조자석을 사용하거나 보조극 등을 만들어 자기동을 실현시키는 방법들이 연구되고 있다. 최근에 회전자 형상에 변화를 주어 기동할 수 있는 방법이 제시되었다. 이는 회전자 형상에 변화를 주어 부분적으로 자기포화 정도를 다르게 하여 자기동을 실현하는 방식이다. 본 논문에서는 자기 포화 영역을 갖는 단상 6/6 SRM의 자기구조를 해석하고 기존의 자기구조를 개선하는 것을 목적으로 한다. 이 자기 해석을 위해 유한요소법 해석 프로그램인 FLUX2D를 사용하였다.

• 약학회지
• /
• 제30권6호
• /
• pp.348-351
• /
• 1986

New synthetic method for methyl-7-iodoheptanoate was studied. Methyl-7-iodoheptanoate is important compound in the synthesis codlemone, the sex pheromone of codling moth which doing harm to apple tree significantly, and this compound also be used essentially in the synthesis of prostaglandin derivatives. In previous the methyl-7-iodoheptanoate has been prepared from-7-chloroheptanoic acid as a starting material with disadvantage, since the 7-chloroheptanoic acid is expensive and the process is much complicate. In this paper the method to preparing methyl-7-iodoheptanoate was developed economically by using dihydropyran as a starting material in the course of 5 steps. Hence, methyl-7-iodoheptanoate which can be synthesized by new method studied onthis paper should be very useful compound for preparing codlemone or its acetate which will be used to developing pollution-free insecticides, and for preparing prostaglandin derivatives with advantage.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권1호
• /
• pp.9-15
• /
• 2003

This Paper deals with the design of Moving Magnet type Linear Oscillatory Actuator(MM-LOA) using spring damper based on the design procedure and the characteristic analysis. MM-LOA is applied to variable load such as vaccum pump and compressor, The structure of piston type is selected to reduce a noise. MM-LOA has over-displacement in starting state because of the low inertia of mover To improve the starting characteristic, spring damper is used. The optimum spring constant of spring damper is detected and in consideration of spring damper, MM-LOA redesigned. The parameter is calculated by Finite Element Method(FEM). For the dynamic characteristic analysis, time differential method composed of voltage and kinetic equation is used. The propriety of the improved model is verified through the experimental results.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.34-38
• /
• 2005

The finite element method is very flexible for new shapes and provides flux distribution, magnetomotive force, eddy currents, and torques. However, it requires lengthy computational time in order to achieve desired accuracy. The magnetic equivalent circuit method takes less computation time than the finite element method. Therefore, the finite element method is mainly used to confirm the completed design. The magnetic equivalent circuit method is convenient for complicated analysis of the transient state of the induction motor. The magnetic equivalent circuit method is restricted to only one direction of magnetic flux. In this paper, the construction elements (that is, stator iron, rotor iron, yoke, air gap, etc.) of the squirrel cage induction motor were represented by a flux tube and the air gap magnetomotive force was calculated by the magnetic equivalent circuit method. Starting transient torque and phase current of the squirrel cage induction motor were verified by the theoretical calculation and the experiment.