• 한국운동역학회지
• /
• 제19권4호
• /
• pp.663-669
• /
• 2009

본 연구의 목적은 런닝 턴 동작시 많은 정확한 턴을 위한 방법으로 발의 움직임을 역학적으로 분석하기 위함이다. 런닝 턴 동작에 대한 많은 역학적인 요인들 중 정확한 턴을 위해서는 감속이 발생되고 이런 감속은 진행하고자 하는 방향으로 턴을 할 수 있게 해준다. 턴이 시작되는 시점인 발의 회전각과 이로 발생되는 몸통의 각을 3차원 영상분석과 지면반력 분석을 하였다. 따라서, 여러 매개변수들 중 수직축(z축)에서 발의 총 회전각($\theta_f$)/몸통 총 회전각($\theta_d$)= 발의 효과($\varepsilon$)로 단순화 시켜 간단한 방정식을 만들어서 설명했으며, 자료 산출을 위해 평균 속력 4.5m/s에서 진행 방향 $0^{\circ}$, $30^{\circ}$, $60^{\circ}$ 턴에 대한 분석을 통해 턴의 각이 커지면 커질수록 입각기 시간, 발 변위, 좌 우힘이 증가했음을 알 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1390-1398
• /
• 2006

A gerotor pump is suitable for oil hydraulics of machine tools, automotive engines, compressors, constructions and other various applications. In particular the pump is an essential machine element that feeds lubricant oil in an automotive engine. The subject of this paper is the theoretical analysis of internal lobe pump whose the main components are the two rotors. Usually the outer one is characterized by lobes with a circular shape, while the inner rotor profile is determined as a conjugate to the other. For this reason the first topic presented here is the definition of the geometry of the rotors starting from the design parameters. The choice of these parameters is subject to some limitations in order to limit the pressure angle between the rotors. Now we will consider the design optimization. The first step is the determination of the instantaneous flow rate as a function of the design parameter. This allows us to calculate three performance indexes commonly used for the study of positive displacement pumps the flow rate irregularity, the specific flow rate, and the specific slipping. These indexes are used to optimize the design of the pump and to obtain the sets of optimum design parameter Results obtained from the analysis enable the designer and manufacturer of the oil pump to be more efficient in this field.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권1호
• /
• pp.1-12
• /
• 2000

The wake geometries of a two-bladed rotor in axial flights using a time-marching free-wake method without a non-physical model of the far wake are calculated. The computed free-wake geometries of AH-1G model rotor in climb flight are compared with the experimental visualization results. The time-marching free-wake method can predict the behavior of the tip vortex and the wake roil-up phenomena with remarkable agreements. Tip vortices shed from the two-bladed rotor can interact with each other significantly. The interaction consists of a turn of the tip vortex from one blade rolling around the tip vortex from the other. Wake expansion of wake geometries in radial direction after the contraction is a result of adjacent tip vortices begging to pair together and spiral about each other. Detailed numerical results show regular pairing phenomenon in the climb flights, the hover at high angle of attack and slow descent flight too. On the contrary, unstable motions of wake are observed numerically in the hover at low angle of attack and fast descent flight. It is because of the inherent wake instability and blade-vortex-interaction rather then the effect of recirculation due to the experimental equipment.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.124-131
• /
• 2006

A gerotor pump is suitable for oil hydraulics of machine tools, automotive engines, compressors, constructions and other various applications. Especially the pump is an essential machine element of an automotive engine to feed lubricant oil. The subject of this paper is the theoretical analysis of internal lobe pump whose the main components are the rotors: usually the outer one is characterized by lobes with circular shape, while the inner rotor profile is determined as conjugate to the other. For this reason the first topic presented here is the definition of the geometry of the rotors starting from the design parameters. The choice of these parameters is subject to some limitations in odor to limit the pressure angle between the rotors. Now we will consider the design optimization. The first step is the determination of the instantaneous flow rate as a function of the design parameter. This allows us to calculate three performance indexes commonly used far the study of positive displacement pumps: the flow rate irregularity, the specific flow rate, and the specific slipping. These indexes are used to optimize the design of the pump and to obtain the sets of optimum design parameter. Results obtained from the analysis enable the designer and manufacturer of oil pump to be more efficient in this field, and the system could serve as a valuable one for experts and as a dependable training aid for beginners.

• 한국운동역학회지
• /
• 제21권1호
• /
• pp.57-65
• /
• 2011

This research was conducted to biomechanically analyze Tippelt motion in parallel bars, and establish technical understanding. To achieve that goal, the performances of the Tippelt acts carried out by five world top-class national gymnasts in the parallel bars 3-dimensional cinematographic analysis and EMG analysis were conducted and following conclusion were obtained. The Tippelt motions of excellent national gymnasts perform tap motion through the down swing of a large circular movements, and perform kick-out motion rapidly extending shoulder joint angle and hip joint angle with the trunk in a position close to perpendicular position at the vertical downwardness of the grasping the bars. At this time, if handstand starting the movement is too delayed or rapidly down swung, it was shown that from the initial falling, unnecessary muscular power was wasted in trapezius, anterior deltoid, erector spinae, latissimus dorsi, upper rectus abdominis, lower rectus abdominis. The muscular parts in tap motion generating muscle action potential were pectoralis major, rectus femoris, upper rectus abdominis, lower rectus abdominis, and those in kick-out motion were upper rectus abdominis, lower rectus abdominis, trapezius and anterior deltoid.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.326-328
• /
• 2000

The paper proposes the scheme of skew detection for Thai printed document images by using linear regression algorithm. It intends to use with the Thai character recognition systems to reduce the skew detection time. This scheme begins by finding the center of gravity of a document image. This point is used as the starting point for gathering data in the scheme. The data is obtained by scanning incrementally one pixel in vertically with the width of 20-pixels. After the scanning process, if data Is different from it's neighbor more than ${\pm}$ 15 pixels, it will be considered as noise or data in other lines and will be deleted. The last step is the operation by using linear regression algorithm on these selected data and the skew angle will be obtained. The proposed method has been tested with 45 document images with different fonts, sizes and skew angles. The experiment results show that the proposed method can detect the skew angle with the error of less then one degree. The average processing time is about 19 times faster than that of the Hough Transform method.

• 대한인간공학회지
• /
• 제29권6호
• /
• pp.861-868
• /
• 2010

This study explored an extended three-dimensional Fitts' law that is more suited for the pointing task than the conventional Fitts' law. The experiments were conducted under the manipulation of the distance to the target, size of the target, and direction of the target's location that can be described by two angles, $\theta1$ and $\theta2$. Considering the starting point as the center of coordinates, $\theta1$ is the angle between the positive z-axis and the target location and $\theta2$ is the angle between the positive y-axis and the projected target location on the x-y plane. From the experimental results, we confirmed that all four variables significantly affect the movement time. As we extended the index of difficulty of the conventional Fitts' model by incorporating $\theta1$ and $\theta2$, we established an extended Fitts' model that showed better accordance with the empirical data than the conventional Fitts' model and 3D Fitts' law of Murata and Iwase, in terms of the $r^2$ and the standard error of the residual between the measured movement time and the predicted value.

• 한국자기학회지
• /
• 제17권6호
• /
• pp.246-252
• /
• 2007

본 논문에서는 출발원료 배합비 및 육성 파라미터가 LPE(Liquid Phase Epitaxy)법으로 육성된 자성 가넷 막의 특성에 미치는 영향을 조사하며, 광 CT의 페러데이 회전자용으로서 적합한 막의 육성 조건을 제시한다. 막을 평가하기 위하여 조사한 특성은 막후, 표면 모폴로지, X선 회절, 격자상수, 막과 기판(단결정 비자성 가넷 웨이퍼)사이의 격자상수의 부정합, 페러데이 회전각 등이었다. 또한, 육성된 자성 가넷 막을 이용하여 광 CT를 제작하고, 성능을 평가했다.

• Tribology and Lubricants
• /
• 제35권4호
• /
• pp.244-266
• /
• 2019

The purpose of this study is to estimate the wear volumes of engine journal bearings operating at variable angular velocity of a shaft in the beginning of firing start-up cycle. To do this, first we find the potential region of wear scar on engine journal bearings where the applied bearing load and crank shaft velocity are variable. The potential wear regions are discovered by finding minimum oil film thickness at every crank angle existing below most oil film thickness scaring wear (MOFTSW) obtained based on the concept of the centerline average surface roughness. Then we calculate the wear volume from the wear depth and two wear angles decided by the magnitude of each film thickness lower than MOFTSW at every crank angle. The results show that the expected wear region is located at a few bearing angles after and/or behind the upper center of a big-end bearing and the lower center of a main bearing. And the real wear region is similar to the estimated wear region. Further we find that the wear scar on an engine journal bearing may occur at re-starting time after switch-off of a start motor especially under the condition of high oil temperature.

• Steel and Composite Structures
• /
• 제46권4호
• /
• pp.525-538
• /
• 2023

This paper focuses on the energy absorption of lattice core sandwich structures of different configurations. The diamond lattice unit cell, which has been extensively investigated for energy absorption applications, is the starting point for this research. The energy absorption behaviour of sandwich structures with an expanded metal sheet as the core is investigated at low-velocity impact loading. Numerical simulations were carried out using ABAQUS/EXPLICIT and the results were thoroughly compared with the experimental results, which indicated desirable accuracy. A parametric analysis, using a Box-Behnken design (BBD), as a method for the design of experiments (DOE), was performed. The samples fabricated in three levels of parameters include 0.081, 0.145, and 0.562 mm² Cell sizes, and 0, 45, and 90-degree cell orientation, which were investigated. It was observed from experimental data that the angle of cells orientation had the highest degree of influence on the specific energy absorption. The results showed that the angle of cells orientation has been the most influential parameter to increase the peak forces. The results from using the design expert software showed the optimal specific energy absorption and peak force to be 1786 J/kg and 26314.4 N, respectively. The obtained R2 values and normal probability plots indicated a good agreement between the experimental results and those predicted by the model.