• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.149-156
• /
• 2017

Various kinds of accessories(e.g., clock, radio, automatic door locks, alarm devices, etc.) or unit components (e.g., black box, navigation system, alarm, private audio, etc.) require dark current even when the vehicle power is turned off. However, accessories or unit components can be the causes of excessive dark current generation. It results in battery discharge and the vehicle's failure to start. Therefore, immediate detection of abnormal dark current and response are very important for a successful repair job. In this paper, we can increase the maintenance efficiency by presenting a standardized diagnostic process for the measurement of the dark current and the existing problem. As a result of the absence of a system to block the dark current in a vehicle, diagnosis and repair were performed immediately by using a standardized dark current diagnostic process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1099-1100
• /
• 2006

The running of the electric train are done by powering, breaking and coasting. Powering to start and accelerate the rolling stock means driving the three-phase electric induction motors controlled by VVVF inverters which are connected to overhead power line directly(DC) or indirectly(AC, DC/AC). Breaking is achieved by blending control which is the proportional combination between regenerative breaking of VVVF inverter and air pressure control of breaking operating unit(BOU). Therefore, Data obtained during two operation are very important items to evaluate the running performance of RS. This paper has investigated in real time data acquired from VVVF inverter and measured by pressure sensor directly connected to air breaking line(motor car and trailer car). By analyzing data in the region of time and frequency, fundamental methods for eavaluating the running performance of RS quantitatively and objectively have been suggested.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.887-888
• /
• 2006

Switched Reluctance Motor(SRM) is rotated by reluctance force generated between rotor pole and stator pole. So SRM must be switched by exciting current according to rotor position. but SRM takes the advantages of high speed driving and very simple structure. The single phase SRM can not be start by itself and torque ripple is generated more than multi-phase SRM. But mechanical structure and driver is simpler than multi-phase SRM. The single phase SRM driver is composed with the absolute encoder and DSP to control exciting section and current, and is supplied by constant voltage. So The paper is intend to measure the speed charactrer of double silent pole type SRM by using the unipolar driving curcuit.

• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.58-67
• /
• 2006

In this paper, fuzzy logic based active ventilation system with security function is proposed and implemented. We can easily experience the situation that inner air is so hot to get start immediately after parking at summer day. Hot temperature is enough to explode a gas lighter or to suffocate a little chid. Proposed system has 1 blower and 2 axial fans to ventilate inner air. Based on the fuzzy logic, speed and direction of each fan are controlled. In addition to controlling fans, controller put down windows and adjust the periods of open time. In order to prevent the theft and security problems, IR sensors are used to detect objects. On detecting objects, controller put up windows. Experimental result shows that implemented system can be effectively ventilate inner air and reduce temperature. Proposed system can be applicable to commercial automobiles.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.33-35
• /
• 2005

We propose an improved sensorless drive method of Switched Reluctance Motors using impressed voltage pulses. Conventional impressed voltage pulse method has a problem of phase delay because of low -pass filter. So In this paper we propose an unproved sensorless driving method based on the impressed voltage pulse using new phase-shift circuit technique that overcomes the phase delay and start-up problem.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.952-954
• /
• 2000

In the cleaning-water treatment process, the flocculation machine is operated by the V.S motor when the coagulation-facility of the coagulation-process is operated. But after the flocculation machine is stopped by an instantaneous power failure, the transient takes place when the coagulation facility is re-started. To improve the transient state, we developed the reinforcement-circuit which had the function of soft-start and adapted to the field. As a result of this study, we reduced the damage of facilities and had the safety in maintaining the quality of water and improved the efficiency in the maintenance and the management.

• 대한안전경영과학회지
• /
• 제14권1호
• /
• pp.123-128
• /
• 2012

This paper deals with the productivity increment through construction of HT8 production system for automobile factory in China. HT8 production system start to build up several management indices. The important management indices consists of organization management, location management, management of order, management of defective item, management of delivery information, and warehouse management. This HT8 production system is expected to obtain the improvement for overall organization management and reduction by 50% in warehouse cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.67-69
• /
• 2009

본 논문에서는 자성재료의 비선형성을 고려한 단상 직입 영구자석형(LSPM) 동기전동기의 기동특성해석을 다룬다. 전동기의 운전상태에 따른 자성재료의 비선형특성을 고려하기 위해 정자장 유한요소법을 이용하여 d축과 q축에 대해 전류변화에 따른 인덕턴스를 추출하였다. 계산된 인덕턴스를 LSPM의 등가회로에 적용하였으며 Runge-Kutta 법을 이용하여 시간차분해석을 수행하였다. 제시된 해석방법으로 계산된 기동특성과 유한요소해석결과를 비교함으로써 비선형의 영향을 고찰 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.900-901
• /
• 2007

In this paper, an approach to designing controllers for dynamic hybrid Tension/Mobile control of a installed robot for a troy wire cable is presented. Mobile control system of robot is designed based on equation of dc motor and tension control system is designed based on equation of ac servomotor for generating torque and dynamic equation of a wire cable. Dynamic hybrid control system is proposed by feedforward controller with acceleration and tension at start of robot to the case where the tow task of robot dynamics is suppressed a mutual interference. The proposed system is simulated and experimented, results is verified the utilities.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.128-130
• /
• 2001

고성능 영구자석의 보급이 활발해지면서 기존 유도 전동기와 같이 상용전원에서 구동이 가능하고 동기전동기의 특성을 갖는 고효율 유도기동성 영구자석 전동기에 대한 관심이 증가하고 있다. 이러한 유도기동성 영구자석 전동기는 회전자에 알루미늄 바와 영구자석이 설치되어 유도기의 원리로 기동이 되며 정상 속도에서는 동기 전동기의 특성을 갖게 된다. 이때 동기속도로 인입되는가의 여부를 판별하기 위한 기동 특성 해석은 매우 중요하다. 이러한 유도 기동성 영구자석 전동기의 기동시 특성을 해석하기 위해서는 종래의 유도 전동기의 과도 특성 해석 방법에 영구자석에 의한 영향을 고려해야 한다. 본 논문에서는 등가회로 해석 방법을 이용하여 유도 기동성 영구자석 전동기의 기동시의 특성을 살펴보고자 한다.