• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.122-127
• /
• 2006

In case of lap joint fillet welds of thin plate, the example which is applicable to Plasma Welding increases substituting for the exiting TIG Welding but the quality of Plasma arc welding has a special feature influenced sensitively by the condition of welding caused by controlling the various parts of welding torch. This research is purposed to improve lap joint fillet welds of thin plate in high quality and attain the high productivity and it is examined that how the change of electrode tip angle and Setback has an effect on the quality of welding and it is investigated how the change of Setback and Standoff has an effect on Melting efficiency using Response Surface Analysis.

• 한국터널지하공간학회 논문집
• /
• 제14권5호
• /
• pp.517-528
• /
• 2012

연마재 워터젯을 이용하여 암반을 굴착하기 위해서는 노즐이 삽입되고 절삭하는 연속적 공정이 요구된다. 본 연구에서는 노즐이 삽입되기 위한 충분한 절삭 폭을 확보하기 위해 한 쌍의 연마재 워터젯 노즐을 이용하여 암석 절삭실험을 실시하였다. 한 쌍의 노즐형태와 위치에 따른 기하학적 변수에 따라 암석 절삭형상과 절삭 폭이 달라지는 것을 확인하였다. 정의된 기하학적 변수에 따라 절삭 깊이 및 폭을 측정하여 암반에 형성되는 절삭단면 형상을 분석하였다. 그 중 노즐 삽입이 가능한 기하학적 변수를 제시하고 현장적용 가능성에 대해 검증하였다.

• Journal of Welding and Joining
• /
• 제15권6호
• /
• pp.57-65
• /
• 1997

A study was undertaken to determine the influence of welding variables such as shielding and plasma gases, torch standoff, travel speed and heat input, etc. on the quality of plasma arc welds in Zircaloy-4 sheet, 2mm thick. Effect of shielding gases and their flow rates on the mechanical properties of Zircaloy-4 welds by plasma arc welding were determined in terms of tensile, bardness and bend tests. The microstructure and fracture surface of Zircaloy-4 welds were investigated by optical and scanning electron microscopies. In addition, the causes of porosity and undercut in plasma arc welds of Zircaloy-4 were also investigated. Zircaloy-4 weld bead width and depth by helium shielding gas showed a wider and deeper than those by argon. It was found that Zircaloy-4 welds with shielding gas of helium did dxhibit a little smoother and uniform weld beads than those with shielding gas of argon. It was also found that the optimum gas flow rates for Zircaloy-4 welding were 0.45l/min for plasma gas with Ar and 4.5 - 6 l/min for shielding gas with He. In addition, there was no big difference in the microstructure and fracture surface of the weld metals made by either Ar shielding gas or He shielding gas.

• Nuclear Engineering and Technology
• /
• 제49권4호
• /
• pp.865-872
• /
• 2017

For more than 10 years, the laser process has been studied for dismantling work; however, relatively few research works have addressed the effect of high-power fiber laser cutting for thick sections. Since in the nuclear sector, a significant quantity of thick material is required to be cut, this study aims to improve the reliability of laser cutting for such work and indicates guidelines to optimize the cutting procedure, in particular, nozzle combinations (standoff distance and focus position), to minimize waste material. The results obtained show the performance levels that can be reached with 10 kW fiber lasers, using which it is possible to obtain narrower kerfs than those found in published results obtained with other lasers. Nonetheless, fiber lasers appear to show the same effects as those of $CO_2$ and ND:YAG lasers. Thus, the main factor that affects the kerf width is the focal position, which means that minimum laser spot diameters are advised for smaller kerf widths.

• 대한조선학회논문집
• /
• 제57권5호
• /
• pp.271-277
• /
• 2020

Recoverability and vulnerability of navy ships under underwater explosion are critical verification factors in the acquisition phase of navy ships. This paper aims to establish numerical analysis techniques for the underwater explosion of navy ships. Doubly Asymptotic Approach (DAA) Equation of Motion (EOM) of primary shock wave and secondary bubble pulse proposed by Geers-Hunter was introduced. Assuming a non-compressive fluid, reference solution of the DAA EOM of Geers-Hunter using Runge-Kutta method was derived for the secondary bubble pulse phase with an assumed charge conditions. Convergence analyses to determine fluid element size were performed, suggesting that the minimum fluid element size for underwater explosion analysis was 0.1 m. The spherical and cylindrical fluid domains were found to be appropriate for the underwater explosion analyses from the fluid domain shape study. Because the element size of 0.1 m was too small to be applied to the actual navy ships, a very slender beam with the square solid section was selected for the study of fluid domain existence effect. The two underwater explosion models with/without fluid domain provided very similar results in terms of the displacement and stress processes.

• 화약ㆍ발파
• /
• 제39권4호
• /
• pp.12-21
• /
• 2021

본 연구에서는 발파진동에 대한 콘크리트 배수관로 보호구의 내진성능을 비교하기 위해 일련의 FEM 수치해석을 수행하였다. 비교 대상은 본 연구에서 제안하는 두 종류의 ㅁ 형태의 보호구와 재래식의 ㄷ 형태의 보호구이다. 해석 과정에서는 폭원 이격거리와 지발당 장약량을 변화시키면서 세 종류의 보호구의 내진 저항을 비교하였다. 그 결과, 본 연구에서 제안하는 두 종류의 보호구가 진동저감 성능의 측면에서 재래식 보호구에 비해 더 우수한 것으로 나타났다.

• Earthquakes and Structures
• /
• 제21권5호
• /
• pp.461-475
• /
• 2021

Strategic structures are a potential target of the growing terrorist attacks, so their performance under explosion hazard has been paid attention by researchers in the last years. In this regard, the aim of this study is to evaluate the blast-resistance performance of lead-rubber bearing (LRB) base isolation system based on a probabilistic framework while uncertainties related to the charge weight and standoff distance have been taken into account. A sensitivity analysis is first performed to show the effect of explosion uncertainty on the response of base-isolated buildings. The blast fragility curve is then developed for three base-isolated steel moment-resisting buildings with different heights of 4, 8 and 12 stories. The results of sensitivity analysis show that although LRB has the capability of reducing the peak response of buildings under explosion hazard, this control system may lead to increase in the peak response of buildings under some explosion scenarios. This shows the high importance of probabilistic-based assessment of isolated structures under explosion hazard. The blast fragility analysis shows effective performance of LRB in mitigating the probability of failure of buildings. Therefore, LRB can be introduced as effective control system for the protection of buildings from explosion hazard regarding uncertainty effect.

• 화약ㆍ발파
• /
• 제29권2호
• /
• pp.1-12
• /
• 2011

외부폭발, 화재, 충돌, 지진, 태풍과 같은 비정상 하중에 의한 고층빌딩의 연쇄붕괴(progressive collapse) 해석에 관련된 많은 연구가 진행되고 있다. 특히 그러나 실규모의 고층건물을 대상으로 한 손상 및 붕괴에 실험은 현실상 불가능한 실정이다. 본 연구에서는 구조물 발파해체분야에서 적용되는 ELS 소프트웨어를 이용하여 외부폭발에 의한 고층 RC 구조물의 국부손상 및 연쇄붕괴시뮬레이션을 수행하였다. 현관으로부터 1m, 2m, 5m, 10m, 15m 이격되어 폭약 1,500kg이 폭발한 것을 가정하여, 이격거리에 따른 국부손상과 이에 따른 연쇄붕괴현상을 파악하였다. 특히 기폭시나리오에 따라 구조물 지지부재의 일부를 제거하여 구조물의 붕괴를 유도하는 발파해체기법을 국부손상-연쇄붕괴 전이과정 연구에 적용하였다.

• Composites Research
• /
• 제31권3호
• /
• pp.83-87
• /
• 2018

An object in the Low Earth Orbit (LEO) is affected by many environmental conditions unlike earth's surface such as, Atomic oxygen (AO), Ultraviolet Radiation (UV), thermal cycling, High Vacuum and Micrometeoroids and Orbital Debris (MMOD) impacts. The effect of all these parameters have to be carefully considered when designing a space structure, as it could be very critical for a space mission. Polybenzimidazole (PBI) is a high performance thermoplastic polymer that could be a suitable material for space missions because of its excellent resistance to these environmental factors. A thin coating of PBI polymer on the carbon epoxy composite laminate (referred as CFRP) was found to improve the energy absorption capability of the laminate in event of a hypervelocity impact. However, the overall efficiency of the shield also depends on other factors like placement and orientation of the laminates, standoff distances and the number of shielding layers. This paper studies the effectiveness of using a PBI coating on the front bumper in a multi-shock shield design for enhanced hypervelocity impact resistance. A thin PBI coating of 43 micron was observed to improve the shielding efficiency of the CFRP laminate by 22.06% when exposed to LEO environment conditions in a simulation chamber. To study the effectiveness of PBI coating in a hypervelocity impact situation, experiments were conducted on the CFRP and the PBI coated CFRP laminates with projectile velocities between 2.2 to 3.2 km/s. It was observed that the mass loss of the CFRP laminates decreased 7% when coated by a thin layer of PBI. However, the study of mass loss and damage area on a witness plate showed CFRP case to have better shielding efficiency than PBI coated CFRP laminate case. Therefore, it is recommended that PBI coating on the front bumper is not so effective in improving the overall hypervelocity impact resistance of the space structure.

• 한국전자파학회논문지
• /
• 제29권8호
• /
• pp.599-607
• /
• 2018

본 논문에서는 지상에 수신 레이다들이 배치된 바이스태틱(bistatic) 환경에서 SAR(synthetic aperture radar) 이미징(imaging) 기법을 적용하여 이동표적을 탐지 및 이미징할 수 있는 지대공 바이스태틱 레이다 시스템 및 이에 대한 구현 알고리즘을 제안한다. 제안 시스템이 기존 SAR 시스템과는 달리 수신 레이다들의 집합에 의해 안테나 개구면(aperture)을 합성하도록 하여 탐지 영역에 대한 조사(illumination)가 길 필요가 없으며, 또한 표적 영상 복원을 위해 평면파 근사화(planewave approxiamtion)에 기반한 SAR 폴라 포맷(polar format) 알고리즘을 적용함으로써 수신 레이다들이 공간상에서 균일하게 이격될 필요가 없음을 보인다. 인접 펄스 수신신호 처리를 통한 클러터 성분 제거 과정이 포함된 영상 복원 알고리즘을 유도하며, 시스템 구현과 관련된 영상 해상도 및 수신 레이다의 공간상 위치 불규칙성에 따른 보상 방법을 설명한다. 최종적으로 시뮬레이션을 통해 제안 시스템의 성능을 보인다.