• 해양환경안전학회지
• /
• 제19권2호
• /
• pp.164-170
• /
• 2013

최근 선박 대형화 추세가 급격하게 진전된 반면 국내 무역항의 수역시설 조건은 과거와 동일하여 특정 항로에서의 해상교통 혼잡이 발생할 개연성이 매우 높다. 국내항의 해상교통혼잡도를 평가하기 위해 사용하는 표준 선박길이는 70 m로, 30년 전부터 현재까지 그대로 사용하고 있어 이에 대한 검토가 시급하다. 본 연구에서는 국내 Port-MIS 데이터베이스에 저장된 60,000여척 선박 주요 제원을 기반으로 선박 대형화 추세를 분석하고, 최근선박의 총톤수와 선박 길이와의 상관함수를 이용해 선박 대형화가 반영된 표준 선박길이를 제안하였다. 또한 최근 5년간 국내 무역항 이용 선박에 대한 톤수별 척수를 기초로 소형선을 제외한 누적 빈도수가 50 % 이상 차지하는 기준점을 도출해 국내항의 표준 선박길이를 제안하였고, 각 표준 선박길이는 국내 무역항의 특성을 고려하여 적용할 필요가 있다.

• 대한조선학회지
• /
• 제20권1호
• /
• pp.29-33
• /
• 1983

The loading condition, of a ship, especially a multi-purpose cargo carrier, in service, is often changed. Then, the prediction of natural frequency changes is necessary to provide measures for prevention of ship vibrations. In this paper a simplified method for the above purpose is presented. The bases of the method are analytical solutions for the lateral vibrations of uniform Timoshenko beams carrying a concentrated mass and the Dunkerley's formula. In this method a ship in the standard ballast condition is reduced to a uniform Timoshenko beam having same system parameters as those of the midship section. To investigate the validity of the proposed method, numerical calculations are carried out for a 46,000 DWT bulk carrier and compared with detailed calculations based on the finite difference method. Even in cases those the cargoes in a hold, length of which is about 13% of the ship's length, are reduced to a concentrated mass, the proposed method gives results of several percent differences from the detailed calculations up to the six-noded mode.

• 수산해양교육연구
• /
• 제24권6호
• /
• pp.872-883
• /
• 2012

Generally the determination of turning basin for vessels of entering & sailing in the berth has been considered in the design standard of harbor construction rules of the port. In this regard, the turning basin has been determined by the max size of entering vessel of the berth/port. But the size of turning basin may considered the ship's maneuvering ability, operator's skillful power, mooring equipments of the berth, arrangement of the fairway and the environment condition of weather & seas around the designated port area. So this paper suggested the optimum size of turning basin after studying the harbour design rules of the advanced marine countries and using by maneuvering simulator for turning basin size and also evaluated the design standard of harbor construction rules and minimum size of turning basin against ship's length at the Gangjung civil/naval port of Jeju Island.

• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.285-295
• /
• 2007

In order to ensure safety of small vessels, the amended Ship Safety Act will come into force on 4th. Nov. 2007. This study is performed to suggest the stability criteria of fishing vessels and cargo ships of 12m in length and over but less than 24m in length which will be new object of amended Ship Safety Act. We have analyze the dimensions of domestic small vessels and the casualty reports of capsizing accidents. According to the analyzed result, 58 ships that are in the range of the dimension are modeled and the stability calculation has been carried out. The Stability for the 58 ships has been analyzed by comparing the result that applied the selected standard in the national standard to the stability calculation. Based on the regression analysis of the model ship's allowable transverse metacentric-heights under several stability requirements, stability criteria for small fishing vessels and cargo ships are proposed.

• 수산해양교육연구
• /
• 제23권2호
• /
• pp.210-220
• /
• 2011

The Keyongin Inland waterway will connect with Han-River and the Northen part of the Incheon-seaway and this way will be opened at the early of October this year. In this regard, the Incheon container terminal is under constructing for 1,000 TEU & 550 TEU container vessels at the place of leftside of the Seohae lockgate. However the terminal length is not still fixed due to at a great expenses of construction and dosposal matter of the dredged soil. So this paper will suggest the optimum berth length by using the full mission shiphandling simulator for berthing and unberthing shipmaneuvering. And also evaluates the design standard of harbor construction rules and analysis optimum berth length against ship's length for safe shiphandling at terminals in accordance with the customary practices of the major ports in Korea.

• 수산해양기술연구
• /
• 제22권1호
• /
• pp.24-28
• /
• 1986

The maneuverabilities of the M. S. PUSAN 402 are studied, based on maneuvering indices and the data obtained from her Z test. The results obtained are summarized as follows: 1. The maneuvering indices K' and T' of the M. S. PUSAN 402 are 1. 490, 1.030 at 10$^{\circ}$ Z test and 2.644, 1.153 at 20$^{\circ}$ Z test and 3.382. 1. 027 at 30$^{\circ}$ Z test respectively. The above calculated values K', T' showed that her maneuverabilities are more increased when the rudder is used to large angle than to smaIl angle. 2. As her maneuvering indices K' and T' at 10$^{\circ}$ Z test are higher than the standard maneuvering indices of fishing boats, her turning ability was found to be higher but her obeying ability lower. 3. When the M. S. PUSAN 402 took a turn at her 10$^{\circ}$ test, running distance was about 8.4 times her own length and didn't exceed the standard maneuvering distance, 5 to 11 times ship's own length, therefore she was considered to have good maneuverabilities syntheticaIly.

• 수산해양기술연구
• /
• 제22권2호
• /
• pp.22-30
• /
• 1986

It is very important for a navigator on bridge to know the maneuverability of his ship sufficiently at sea. Generally, the data of a turning circle test have long been used to study and evaluate the maneuverability of a ship. But referring only the data of the turning circle test method, he can not evaluate his ship's maneuvering characteristics sufficiently. So nowaday the test method added Z test to turning circle test for more detail references is considered to be desirable. In this paper, the authors performed PAL test and Z test together in order to study the maneuverability of M. S.Pusan 403, training ship of the National Fisheries University of Pusan. According to the results of PAL test, the rudder effect in port rudder angle of the M. S. Pusan 403 was found to be more effective than that in starboard one, because her changing amounts of angular velocity, turning radius and tangent speed in port rudder angles were found to be larger than those of them in starboard rudder one in unsymmetry. The relation between her drift angle(.8) and rudder angle (0) was found to be changing with .8=0.640 in direct proportion. As it appeared that her calculated K'-values were smaller than the standard K'-values of different kinds of ships in accordance with her Z test, her turning ability was found to be lower. The running distance of a turn in her 10$^{\circ}$ Z test was about 8.3 times her own length and was found not to be exceeded the standard maneuvering distance, therefore she was considered to have good maneuverabilities synthetically.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.27-31
• /
• 2003

최근 박판두재인 고장력강이 구조물에 폭넓게 사용됨으로서 좌굴이 발생하기 쉽다. 특히 고장력강을 사용하는 선체구조물에서는 좌굴은 중요한 설계기준이 되고 있다. 따라서 좌굴발생 후 거동을 정확하게 파악하는 것은 선체구조의 안정성에 중요하다. 본 연구에서는 선체의 대표적인 구조물인 판을 대상으로 각 선급 룰에서 좌굴강도식의 기준으로 삼고 있는 단순지지조건에서의 여러 가지 항복강도에 따라 압축하중을 받는 박판구조물의 초기좌굴 후 거동과 2차좌굴 후 거동에 대해서 규명하였다. 해석방법으로는 범용 유한요소해석 프로그램인 ANSYS를 이용하였고 2차좌굴과 같은 복잡한 비선형거동을 해석하기 위하여 호장증분법(Arc-length method)을 사용하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.637-640
• /
• 2005

The mechanical properties of bellows, such as the extensibility and the strength can be changed depending on the shape. For the shipbuilding material, it is favorable that the fatigue lift is long due to the elastic property and the reduction of thermal stress in piping system. Nowadays, the domestic production and design of bellows are based on the E.J.M.A Code. Therefore, the design standard is in need because of much errors and lack of detailed analysis. In this study, it is attempted to find out the optimal shape of U-type ship's bellows that is applied to design of experiment using the finite element method. The effective factors, mountain height, length, thickness, and number of mountains and the length of joint are considered and the proper values are chosen for the simulation. The number of mountains are increased, the volume increases above the standard volume and the stress obviously increases. In addition, the effect of the thickness of bellows on the stress is very large. Both of the volume and stress are decreasing at a certain lower value region.

• 수산해양기술연구
• /
• 제18권2호
• /
• pp.77-80
• /
• 1982

총톤수 240 톤급 가다랑어 채낚기 어선의 조종성능을 연구하기 위하여, 실선에 의한 Z실험을 행한 결과를 요약하면 다음과 같다. 1. $10^{\circ}$Z실험에서의 선회성지수 K'는 0.611, 추종성지수 T'는 1.094, 20$^{\circ}$Z시험에서의 K'는 0.622, T'는, 1.695, 30$^{\circ}$Z시험에서 K'는 1.367로서 추종성은 $10^{\circ}$타각, 선회성은 20$^{\circ}$타각을 사용할 때 가장 좋으며, 전체적으로는 $10^{\circ}$의 소타각을 사용할 때의 조종성능이 20$^{\circ}$, 30$^{\circ}$의 대타각을 사용할 때 보다 더 양호하다는 것을 알 수 있다. 2. 조종성지수 K' 및 T'가 다른 종류의 선박들의 그것과 비교하여 작으므로, 추종성은 양호하나 선회성은 나쁘다는 것을 알 수 있다. 3. $10^{\circ}$Z시험에서의 1조작간 항주거리인 5~11배 이내이므로 종합적으로는 조종성능이 양호하다고 볼 수 있다.