• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.100-100
• /
• 2020

Wheat is mainly composed of carbohydrate but it contains a moderate amount of protein, which gives a very useful characteristics to flour food such as the unique elasticity and stickiness of the dough. We developed a calibration equation for analyzing crude protein content using Near Infrared Spectroscopy to quick analyze the crude protein content of wheat germplasm stored in the National Agrobiodiversity Center, RDA, Korea. The 1,798 wheat germplasms were used to draw up the calibration formula. The crude protein's interval distribution of 1,798 wheat germplasms used for the calibration was 7.04-20.84%, the average content was 13.2%, and standard deviation was 2.6%. The germplasms distribution was composed of a suitable group for the preparation of the calibration formula because the content distribution was a normal, excluding the 13.0-15.5% content section. In order to verify the applicability of the NIRS prediction model, we measured the crude protein content of the 300 wheat germplasms that were not used for the calibration using both Kjeldahl analysis and NIR spectrum. The analysis value calculated using each method were statistically processed, and the test results and statistical indicators of the predictive model were compared. As a result, The R² value of the optimized NIRS prediction model was 0.997, and the Standard error of Calibration value(SEC) was 0.132, and slope value was 1.000. With prediction model selection, compared to Kjeldahl method, R² values were 0.994(Kjeldahl), 0.998(NIRS), and the SEC value were 0.191 and 0.132, respectively, comparing the statistical indices of the forecast model. And slope value were 1.013, 1.000, respectively. The analysis of crude protein content by the NIRS predictive model developed by each statistical index showing similar figures is judged to show a high degree of correlation with the Kjeldahl analysis. The proven calibration equation will be used to measure the crude protein content of wheat germplasms held by the National Agrobiodiversity Center, and by dividing the wheat germplasms by their use according to the crude protein content, it will provide useful information to relevant researchers.

• Journal of Nutrition and Health
• /
• v.31 no.8
• /
• pp.1283-1294
• /
• 1998

This study was conducted to investigate nutritional status by anthropometric meas-urement and to assess the validity of indicators for nutritional status of preschool children. Health examinations, including blood and urine tests, were done for 799 childern aged 2 to 6 years. The mean anthropometric measurements of height, weight , head circumference, and chest circumference were 90.2cm, 13.9kg, 47.7cm, 50.9cm for 2 years (n=13), 94.8cm, 15.2kg, 43.3cm, 47.0cm for 3 years(n=125), 100.7cm, 16.4kg, 46.2cm, 50.5cm for 4 years(n=272), 106.5cm, 18.1kg, 48.8cm, 53.8cm for 5 years(n=253), 113.0cm 20.4kg, 50.4cm 56.9cm for 6 years(n=136), respectively. All anthropometric measureemnts were significantly different by age and sex. The results of physical examinations excluding dental examination were normal for all studied children. Urine test results were also normal for the subjects. The most common blood type was A and the rarest one was type AB. The mean hemoglobin concentration was 11.84g/dl for boys(n=398), 11.86g/dl for girls, and 11.85kg/dl for all. The percentage of childeren whose hemoglobin concentration was less than 11.0g/dl was 21.6% for boys and 18.9% for girls. The percentage of children whose height for age, weight for age, and weight for height were in the rang of median $\pm$1 standard devication(S.D) was 71.7% , 65.6%, and 67.0% for each indicator. Obese childeren whose weight for height or weigth for age was more than median +2S.D. were 5.2% while tall children whose height for age was more than median +2S.D, were 1.8% . Past and recent nutritional status of most children(87.2%) were assessed as normal by the combination of three indicators(height for age, weight for age, weight for height). The percentate of coincidence between for height) and one assessed by anthropometric measurements (height for age, weight for age, weight for height) and one assessed by physicial was 59.6%, 69.3% and 67.8% for each indicator, respectively. The distribution of subjects by height for age was significantly different between normal and anemic groups. With these results , the nutritional status of children the studied was normal. The anthropometric measurements reflected the nutritional status of childeren relatively well. In conclusion, in comparison with biochemical meausurements anthropometric measurements are relatively simple and effective indicators for nutritional assessement of children in large health and nutrition suveys in Korea.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.308-319
• /
• 2016

In order to set the outdoor weather conditions to be applied to the design standard of the greenhouse heating and cooling system, outdoor air temperature and heating degree-hour for heating design, dry bulb temperature, wet bulb temperature and solar irradiance for cooling design were analyzed and presented. For every region in Korea, we used thirty years from 1981 to 2010 hourly weather data for analysis, which is the current standard of climatological normal provided by KMA. Since the use of standard weather data is limited, design weather conditions were obtained using the entire weather data for 30 years, and the average value of the entire data period was presented as a design standard. The design weather data with exceedance probability of 1, 2.5, and 5% were analyzed by the TAC method, and we presented the distribution map with exceedance probability of 1% for heating and 2.5% for cooling which are recommended by design standards. The changes of maximum heating load, seasonal heating load and maximum cooling load were examined by regions, exceedance probabilities, and setpoint temperatures. The proposed outdoor design conditions can be used not only directly for the greenhouse heating and cooling design, but also for the reinforcement of heating and cooling facilities and the establishment of energy saving measures. Recently, due to the climate change, sweltering heat in summer and abnormal temperature in winter are occurring frequently, so we need to analyze weather data periodically and revise the design standard at least every 10 years cycle.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.607-610
• /
• 2009

The abnormal combustion in the running engine results to knocking which increases the pressure and temperature in the cylinder, thereby decreasing the generated power by reducing the thermal efficiency. When the temperature and pressure in the cylinder increased rapidly by knocking, abnormal combustion takes place and the engine power is decreased. To investigate the knocking phenomenon, accelerometers are installed in the cylinder head to monitor and diagnose the vibration signal. As method of signal analysis, the time-frequency analysis method was adapted for acquisition of vibration signal and analyzes engine combustion in the short time. In this experiment, after analyzing time data which is stored in the signal recorder in one unit work (4 strokes: 2 revolutions), the signal with frequency and Wavelet methods with extracted one engine combustion data was also analyzed. Then, normal condition with no knocking signal is analyzed at this time. Hereafter, the experiments made a standard for distinguishing normal and abnormal condition to be carried out in acquisition of vibration signal at all cylinders and extracting knocking signal. In addition, analyzing methods can be diverse with Symmetry Dot Patterns (SDP), Time Synchronous Average (TSA), Wigner-Ville Distribution (WVD), Wigner-Ville Spectrum (WVS) and Mean Instantaneous Power (MIP) in the cold test [2]. With signal processing of vibration from engine knocking sensor, the authors adapted a part of engine /rotor vibration analysis and monitoring system for marine vessels to prevent several problems due to engine knocking

• Women's Health Nursing
• /
• v.7 no.4
• /
• pp.631-641
• /
• 2001

This study is to investigate women have pre menstruation discomfort, The period of this research was almost one month (from 25, August 2001 to 25, October 2001). The PAF (Premenstrual assessment form), which was made by Park, Myonng-Wha, used for this study. The confidence rate is Crombach's $\alpha$= .9773. Correcting research papers are analyzed by SPSS 7.5 program and normal feature of the subject is divided by frequency, percentage, mean, standard deviation, t-test and ANOVA. The results of this study are as follows; 1. The average age of the subjects is 26.47 age. 220 subjects(44.6%) have gastroenteric trouble like, enteritis, stomachache, laxity. 278 subjects usually have caffeine drink in routine life. 123 subjects(24.9%) have controlled their diet. The average age of the first plowing is 13.55 ages and distribution is between 10 years and 20 years. The average of the uncomfortable point is 2.84. The way to reduce the uncomfortable feeling on the menstruation is taking relax time. 2. All subjects have experienced pre menstruation discomfort, even the degree uncomfortable feeling is different. Through eighteenth categories on the research papers, average point 2.21 were calculated and many subjects have fatigue ($2.89{\pm}1.0614$) and normal physical uncomfortable ($2.84{\pm}1.0633$) and undercurrent water symptom and unsuitability ($2.45{\pm}0.9857$). 3. According to the result of this study, that shows statistical difference; age (F=2.56. p=.037). marriage (t=2.60, p=.009) the number of children(t=2.83, p=.005), stress level(F=13.03, p=.000) job(F=3.91, p=.020). monthly income(t=2.14. p=.032) uncomfortable degree on the menstruation (F=19.121, p=.000), use of contraceptive appliance or pill(t=-2.20, p=.043), schooling (F=3.30, p=.038). Further research is need to understand pie menstruation discomforts, the variables associated with them. And nursing intervention has to considered in program to reduces of pre-menstruation discomforts.

• Progress in Medical Physics
• /
• v.1 no.1
• /
• pp.23-29
• /
• 1990

In order to explane the stereotactic procedure, the three steps of the procedure (target localization, dose planning, and radiation treatment) must be examined separately. The ultimate accuracy of the full procedure is dependent on each of these steps and on the consistancy of the approach The concern in this article was about dose planning, which is a important factor to the success of radiation treatment. The major factor in dose planning is a dosimetry system to evaluate the dose delivered to the target and normal tissues in the patient, while it generates an optimal dose distribution that will satisfy a set of clinical criteria for the patient. A three-dimensional treatment planning program is a prerequisite for treatment plan optimization. It must cover 3-D methods for representing the patient, the dose distributions, and beam settings. The major problems and possible modelings about 3-D factors and optimization technique were discussed to simplify and solve the problems associatied with 3-D optimization, with relative ease and efficiency. These modification can simplify the optimization problem while saving time, and can be used to develop reference dose planning system to prepare standard guideline for the selection of optimum beam parameters, such as the target position, collimator size, arc spacing, the variation in arc length and weight. The method yields good results which can then be simulated and tailored to the individual case. The procedure needed for dose planning in stereotactic radiosurgery is shown in figure 1.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.2
• /
• pp.231-243
• /
• 2012

This study examines the characteristics of fat body type males aged 35 to 55 with a BMI rate higher than 25 categorized as mid-degree obesity and high-degree obesity according to the $6^{th}$ Size Korea; in addition, the study provides a sizing system for obese males. The physical characteristics of the obese male appeared to be with a shorter lower body compared to an upper body for a higher degree of obesity. Obesity appeared evenly from chest to thigh circumference compared to a normal group. Especially, their waist measurement, depth, and width were significantly larger as well as the crotch length (natural indentation) and a larger waist measurement. As for the cloth sizing system, this study suggests the sizes with higher distribution among the designated size intervals of casual tops, men's suit tops and bottoms based on standard stature, chest size and waist circumference (Omphalion) by KS.

• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.2 s.52
• /
• pp.168-178
• /
• 2004

Uncertainty of final measurement results considering main uncertainty sources being in nicotine of mainstream smoke was estimated. This study was accomplished by using the ISO 'The Guide to the Expression of Uncertainty in Measurement'. Using the two point re-calibration method, uncertainty for nicotine concentration was calculated considering the uncertainty sources of each step. The concentration and uncertainty of nicotine in mainstream smoke was estimated as $153.95{\pm}17.84\;{\mu}g/mL\;(0.77\pm0.089 mg/cig)$. The expanded uncertainty was $17.84 {\mu}g/mL(\pm0.089 mg/cig).$ The reported expanded uncertainty of the measurement is stated as the standard uncertainty of measurement multiplied by a coverage factor of 2, which for a normal distribution corresponds to a coverage probability of approximately $95\%$ The former expression indicates the conversion concentration into the sample.

• Natural Product Sciences
• /
• v.17 no.1
• /
• pp.38-44
• /
• 2011

The quality inspections items such as loss on drying, total ash, and acid-insoluble ash contents in herbal medicines, have a correlation with external sources of pollution, but are not themselves hazardous factors. Z-scores for standard normal distribution were used to investigate herbal medicines requiring quality control, which exceeds the regulatory limits of quality inspection. In total, 7,773 samples were analyzed based on plant parts. For the loss on drying, the numbers of items of herbal medicines requiring quality control are like these; 15 items for above-ground parts and 5 items for underground parts. For the total ash, 21 items for above-ground parts and 4 items for underground parts. For the acid-insoluble ash, 8 items for above-ground parts and 1 item for underground parts.

• Journal of Advanced Navigation Technology
• /
• v.12 no.1
• /
• pp.22-27
• /
• 2008

This paper presents adaptive-MMOSPRED method for prediction of resource demands requested by multimedia calls, and shows the performance of the call admission control based on proposed resource prediction method in multimedia wireless networks. The proposed method determines (I-CDP) random variables of the standard normal distribution by using LMS algorithm that minimize errors of prediction in resource demands, while parameters in an existing method are constant all through the prediction time. Our simulation results show that prediction error in adaptive-MMOSPRED method is much smaller than in fixed-MMOSPRED method. Also we can see via simulation the CAC performance based on the proposed method improves the new call blocking performance compared with the existing method under the desired handoff dropping probability.