• 대한간호
• /
• 제37권3호
• /
• pp.78-91
• /
• 1998

This descriptive study was conducted in order to develop a standard criteria for nursing laboratory facilities and equipment for use by the 3 year nursing colleges. The data was collected from Aug. 28 to Sept. 30, 1997 by mail from 44 3 year nursing schools. To develop a standard criteria, the syllabi for Fundamentals of Nursing laboratory and for Physical Assessment were collected and analyzed. The following information was elicited and analyzed by the researchers : 1. for each procedure in the syllabus, the percentage of schools using the procedures 2. the facilities and equipment recognized as necessary and the percentage of schools which possess each item 3. calculation of the standard criteria for size of the nursing laboratory together with a list of the necessary facilities and equipment. The results of the study were as follows : 1. The Size of facility was 181.2m2 for fundamentals of Nursing laboratory and 56.4m2 for the storage room. For those whose number of students exceed 120, 1.98m2 is required for each students. 2. The number of items included in the standard criteria was 92 for Fundamentals of Nursing and Physical Assessment and 47 for other nursing subjects. The items made of rubber, plastic and the disposable ones were suggested but excluded from the standard criteria. Based on the above findings, the following suggestions were made : 1. Periodic review of the standard criteria is necessary to update the standard. 2. A study on the standardization of the curriculum for basic science laboratory, including experiment and a standard criteria of equipment, is necessary. 3. A study to develop a computer program for management of nursing laboratory facilities and equipment is needed.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제25권3호
• /
• pp.75-83
• /
• 2019

Purpose: There are no clear criteria for slip performance in the BF certification process, so the evaluator relies on subjective judgments depending on the field situation. Physical criteria for determining the slip performance of various floor finishes are not clear. C.S.R., the only criterion currently being used to check slip performance, may raise questions about its coverage, feasibility and reliability. Method: For an analysis of domestic standards and status, KS L 1001, KS M 3510, and KS F 2375. External standards are analyzed for ADA Standard, ANSI Standard, and BS EN Standard. Analyze the test methods and evaluation criteria of O-Y-PSM, BPT, and the dynamic slip resistance test used in these criteria. It also presents an improvement plan for the rational presentation of standards. Results: To date, various kinds of test methods and measuring devices of the slip resistance coefficient have been developed, but there are not many ways to trust useful results related to user safety. Reliability and thoroughly verified test methods and criteria should be used to assess the slip performance of the floor. In order to improve the standard for the evaluation of slip performance in Korea, the existing standard should first be raised to the same level as the overseas standard, and the application of the discriminatory standard should be applied considering the characteristics and usage patterns of each space. Implication: Currently, Korean standards propose various test methods, but the proper use of test methods, scope and assessment criteria are not established, so improvement of the comprehensive standard is necessary.

• 한국환경과학회지
• /
• 제18권7호
• /
• pp.767-780
• /
• 2009

This study investigates the standard, duration period and excess mortality of extreme heat using the standardized daily mortality data from 1991 to 2004, establishing a standard threshold Criteria for Heat Health Watch Warning System in Korea. It ultimately aims to provide the guidance in building up Heat Health Watch Warning System for Korea by suggesting the standard to quantify thermal stress from heat. The standard threshold Criteria for Heat Health Watch Warning System for Seoul metropolitan city takes into account both daily maximum temperature and daily maximum heat index(HI) and consists of four phases; caution, extreme caution, danger, and extreme danger. Extreme caution phase and danger phase are used as the advisory and warning of extreme heat, respectively. Since the nationwide distribution of the frequency of extreme heat day and the excess mortality rate shows little difference across regions, the standard threshold Criteria for Heat Health Watch Warning System for Seoul metropolitan city can be used for other regions.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제21권1호
• /
• pp.67-76
• /
• 2015

Purpose : The current tactile walking surface indicators have not been easily accessible to blind and vision-impaired people due to unexpected variation of walking environment and walking behavior of transportation poor. Moreover, those indicators frequently cause the inconvenience to transportation users' walking. Thus, this study aims to investigate the improvement of tactile walking surface indicators, by comparing and analyzing findings from the relevant research. Results from this study contribute to suggest the better standard criteria of tactile walking surface indicators for transportation users, especially blind and vision-impaired people, the handicapped, the child and the elderly and weak, providing the secure and convenient circumstance for walking. Method : This study presents the problems about the standard criteria of tactile walking surface indicators via the examination of finding from the past studies. For example, we examine all standard criteria, focusing on shapes, colors and qualities of materials used for Tactile Walking Surface Indicators. Then, the present study suggests the improvement of standard, which apply to the current walking environment practically and reasonably. Results : To improve the current condition of tactile walking surface indicators, the analysis on international and domestic standard criteria need to be conducted. Findings from these analyses helps to suggest the better criteria for the interval between projecting points of tactile walking surface indicators, effective perceived range of walking road, and the brightness contrast between tactile walking surface indicators and finishing materials. Implication : The suggested standard criteria of tactile walking surface indicators need to be tested by transportation users, and the practical instructions of establishing tactile walking surface indicators should also be developed.

• 한국지진공학회논문집
• /
• 제18권5호
• /
• pp.231-240
• /
• 2014

This study reviews the status and validity of seismic design criteria (SDC) for major facilities in Korea, which are composed of performance criteria and technical standard. Various facilities with different seismic design response spectra are analyzed to identify their seismic performance and necessity of eventual retrofit. The results are used to derive improvement directions of SDC. It is also concluded that the technical standard should be improved after the revision of the performance criteria.

• 대한조선학회지
• /
• 제6권2호
• /
• pp.17-23
• /
• 1969

The Stability Criteria adopted by the 1969 Standard Ship Design Committee of the Society of Naval Architects are presented and discussed from a personal point of view. The Stability criteria are derived primarily from a similar standard now in practice in Japan expect the design wind condition and a addition of a buoyancy standard.

• 한국항해항만학회지
• /
• 제29권7호
• /
• pp.595-601
• /
• 2005

The IMO manoeuvrability standard was established for preventing sea accidents such as collisions and strandings due to the lack of manoeuvrability. The standard of ship manoeuvrability enforced by resolution MSC.l37(76) has been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless of the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standard is able to be divided into three kinds as followings; (1) Turning capability standard: Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standard : Estimated values in design stage are to be certified by 10 deg. and 20 deg. zig-zag tests of the actual vessel. (3) Shortest stopping distance standard : Estimated value in design stage is to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors verified the criteria of IMO manoeuvrability standard comparing them with the values resulted from sea trial tests of various kinds of actual vessels and examined separately the validity of all criteria of the standard.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 추계학술대회지
• /
• pp.27-33
• /
• 2005

The IMO manoeuvrability standard was established for preventing sea accidents such as collisions and strandings due to the lack of manoeuvrability. The standard of ship manoeuvrability enforced by resolution MSC.137(76) has been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless of the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standard is able to be divided into three kinds as followings; (1) Turning capability standard: Estimated values in design stage are to be certified by turning cir치e test q the actual vessel (2) Course keeping quality standard: Estimated values in design stage are to be certified by 10 deg. and 20 deg. zig-zag tests of the actual vessel. (3) Shortest stopping distance standard: Estimated value in design stage is to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors verified the criteria of IMO manoeuvrability standard comparing them with the values resulted from sea trial tests of various kinds q actual vessels and examined separately the validity of all criteria of the standard.

• 한국지반환경공학회 논문집
• /
• 제8권3호
• /
• pp.51-57
• /
• 2007

강우시의 비탈면 설계에서는 강우특성변화에 따라 지하수위가 지표면에 위치하는 것으로 가정한다. 또한, 안정성 검토는 비탈면 설계시 대절토 비탈면을 대상으로 수행하는 반면, 안정성 검토가 수행되지 않는 비탈면에 대해서는 설계기준에 규정된 표준 경사가 적용된다. 강화된 지하수위 적용기준에도 불구하고 강우시 비탈면의 규모와 관계없이 비탈면 붕괴가 지속적으로 발생되고 있다. 붕괴원인을 조사하기 위하여 본 연구에서는 지반 조건별로 건기시와 우기시에 대하여 국내 시방기준에서 제안하고 있는 토사 비탈면의 표준경사에 대하여 안정성을 검토하였다. 시방기준에서 제시된 비탈면 표준경사는 건기시나 우기시 모두 안정해야 함에도 불구하고, 검토 결과는 많은 경우에서 기준 안전율이 얻어지지 않는 것으로 나타났다. 건기시의 경우는 전체 검토대상 조건에 대하여 약 50% 이상, 우기시의 경우 약 65% 이상이 기준 안전율을 만족하지 못하였다. 이러한 결과를 바탕으로 본 논문은 현 설계기준의 문제점을 지적하고 대책수립을 위한 방안을 제안하고 있다.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.20-27
• /
• 2022

In this paper, we propose to improve the designation examination criteria of agencies that provide personal identity proofing based on the resident registration number (RRN), a 13-digit number uniquely assigned by the government to identify Korean citizens. In online commerce, etc., the personal identity proofing agency (PIPA) is a place where online users can prove their personal identity by presenting an alternative means instead of their RRN. The designation examination criteria for PIPAs established in 2012 is a revision of the relevant current laws, and there is a problem in applying the designation examination for alternative means of RRN as the current examination standard. Therefore, in this paper, we propose a method to make the current examination criteria applicable to the newly designated examination of the personal identity proofing service provider based on the current RRN alternative method. According to the current designation examination criteria, only those who satisfy all the examination criteria are designated as the PIPA. However, in reality, it is not in line with the purpose of regulatory reform to require that all examination criteria be satisfied. In the proposed method, it is proposed to apply the standard score system for designation of PIPAs, to make the law current, to secure legal compliance, and to establish a new examination standard to provide a new alternative means of personal identity proofing service. By applying the proposed method to the PIPA designation examination, various alternative means of RRN can be utilized in the online commerce service market.