• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.126-127
• /
• 2014

At construction sites, due to the reason of inconvenience and difficulties of producing and using curing equipment and when it comes to measuring compression strength of the actual structure, strength of structure concrete according to general standards which are suggested in concrete standard specification are assessed. However, this method does not consider various variables of the sites such as kinds concretes and sizes of frame works so that it is not easy to measure proper curing period and strength. Thus, this study reviews description of strength development according to In-situ temperature system and analyzes and compares properties of strength development of the existing curing methods such as sealing curing so that it provides basic materials for period of removal of molds.

• 대한음성학회지:말소리
• /
• 제55권
• /
• pp.77-91
• /
• 2005

In this paper, we propose an XML based meta-data specification for industrial speech databases. Building speech databases is very time-consuming and expensive. Recently, by the government supports, huge amount of speech corpus has been collected as speech databases. However, the formats and meta-data for speech databases are different depending on the constructing institutions. In order to advance the reusability and portability of speech databases, a standard representation scheme should be adopted by all speech database construction institutions. ETRI proposed a XML based annotation scheme [51 for speech databases, but the scheme has too simple and flat modeling structure, and may cause duplicated information. In order to overcome such disadvantages in this previous scheme, we first define the speech database more formally and then identify object appearing in speech databases. We then design the data model for speech databases in an object-oriented way. Based on the designed data model, we develop the meta-data specification for industrial speech databases.

• Advances in environmental research
• /
• 제3권3호
• /
• pp.253-281
• /
• 2014

The quest for enhanced thermal comfort for dwellings encompasses the holistic utilization of improved building fabric, impact of weather variation and amongst passive cooling design consideration the provision of appropriate ventilation and shading strategy. Whilst thermal comfort is prime to dwellings considerations, limited research has been done in this area with the attention focused mostly on non-dwellings. This paper examines the current and future thermal comfort implications of four different standard construction specifications which show a progressive increase in thermal mass and airtightness and is underpinned by the newly developed CIBSE adaptive thermal comfort method for assessing the risk of overheating in naturally ventilated dwellings. Interactive investigation on the impact of building fabric variation, natural ventilation scenarios, external shading and varying occupants' characteristics to analyse dwellings thermal comfort based on non-heating season of current and future weather patterns of London and Birmingham is conducted. The overheating analysis focus on the whole building and individual zones. The findings from the thermal analysis simulation are illustrated graphically coupled with statistical analysis of data collected from the simulation. The results indicate that, judicious integrated approach of improved design options could substantially reduce the operating temperatures in dwellings and enhance thermal comfort.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.29-31
• /
• 2010

This study investigated the typical standards of B kind of standard specification related to home and abroad forms design and compared them, and the results can be summarized as follows. In case of domestic standards, regulations on most forms design was described relatively in detail. and in case of CTEA among them, it included detailed contents of load conditions, lifting and subsidence. In case of abroad standards, the design regulations are only simply mentioned, not in detail, in ACI, CEB-FIP and BS, and JCI and JASS were similar to domestic KCI and KASS regulations. As to structural calculation in forms design regulations, most of domestic regulations included detailed matters on structural calculation, among them, CTEA shows the most detailed matters on it. On the other hand, it could be known that in case of abroad standards, most standards do not include matters on structural calculation except ACI, JCI and JASS.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.129-130
• /
• 2023

The compressive strength of concrete is greatly affected by the temperature inside the concrete at the initial age immediately after pouring. In the KCI Concrete Standard Specification, only the temperature correction strength (Tn) according to the curing temperature is applied in the mixing strength calculation formula, and mSn is not considered. The formula based on the Chrino model of the blast furnace slag concrete was calculated, and the strength of the structural concrete and the strength of the water cured specimen in the same mixture were compared with the predicted strength. As a result, the error between the predicted strength and the measured strength was greater in the structural concrete than in the concrete specimen.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.152-153
• /
• 2013

Based on the Fire Service Act of mandatory provision, new buildings are strictly forced to use fire protection materials. Flame resistant EPS is one of those materials. Unlike conventional EPS that can be fused to make EPS ingot and be recycled for various purposes, flame resistant EPS waste cannot be recycled due to the presence of protective coating that is applied to increase the fire protection properties of EPS. A suitable alternative that can process large amount of flame resistant EPS wastes needs to be developed, and one of the possible alternative is to use them as construction materials. In this research, experiments were designed to observe whether the flame resistant EPS wastes can be utilized as partial replacements of fine aggregates in cement mortar. The replacement ratio of waste EPS was varied, and its effect on compressive strength and absorption capacity was investigated. According to the experimental results, both compressive strength and absorption capacity met the Korean Standard specification for cement bricks and blocks, indicating that flame resistant EPS wastes can be used for construction purposes.

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.981-994
• /
• 2016

Two field research stations based upon atmospheric corrosivity monitoring combined with reinforced concrete corrosion rate sensors have been established in Kuwait. This was established for the purpose of remote monitoring of building materials performance for concrete under Kuwait atmospheric environment. The two field research sites for concrete have been based upon an outcome from a research investigation intended for monitoring the atmospheric corrosivity from weathering station distributed in eight areas, and in different regions in Kuwait. Data on corrosivity measurements are essential for the development of specification of an optimized corrosion resistance system for reinforced concrete manufactured products. This study aims to optimize, characterize, and utilize long-term concrete structural health monitoring through on line corrosion measurement and to determine the feasibility and viability of the integrated anode ladder corrosion sensors embedded in concrete. The atmospheric corrosivity categories supported with GSM remote data acquisition system from eight corrosion monitoring stations at different regions in Kuwait are being classified according to standard ISO 9223. The two nominated field sites where based upon time of wetness and bimetallic corrosion rate from atmospheric data where metals and rebar's concrete are likely to be used. Eight concrete blocks with embeddable anodic ladder corrosion sensors were placed in the atmospheric zone adjacent to the sea shore at KISR site. The anodic ladder corrosion rate sensors for concrete were installed to provide an early warning system on prediction of the corrosion propagation and on developing new insights on the long-term durability performance and repair of concrete structures to lower labor cost. The results show the atmospheric corrosivity data of the environment and the feasibility of data retrieval of the corrosion potential of concrete from the embeddable sets of anodic ladder corrosion sensors.

• Human Ecology Research
• /
• 제58권3호
• /
• pp.357-374
• /
• 2020

This study suggests the use of standardized sewing terms for the construction of smart sewing systems. This study analyzed the use of stitches (ISO 4915) and seams (ISO 4916) for cut and sewn knit garment which are the basic elements of sewing on an ISO basis. The results of the analysis of sewing specifications of cut and sewn knit garments are as follows. First, the use of stitches and seams were analyzed. As a result, both stitches and seams were used as non-standard terms. Second, among 3,263 stitches, ISO 4915 No. 406 followed by 401, 504, 605 were the most frequently used; however, ISO 4915 No. 514 was anticipated the most because the ISO 4915 No. 514 used for joining was not recorded in the sewing specification. Finally, the use of stitch for each seam was analyzed. The most common stitch used for ISO 4916 No. 6.02.07 was ISO 4915 No. 406. In addition, when it was sewing ISO 4916 No. 4.04.01, ISO 4915 No. 504 was used in step 1, and ISO 4915 No. 406, 602, and 605 were used in step 2. It is important to use the international standard sewing terms for the production site based on the results. In addition, the construction of smart sewing systems and the work of international standardization through industry-university cooperation are important for securing global competitiveness. Therefore, the use of international standard terminology and practical training should be conducted with a focus on stitching and seams with high frequency of use.

• 한국건축시공학회지
• /
• 제18권6호
• /
• pp.543-550
• /
• 2018

해안도시에 건설하는 건축물의 콘크리트 배합은 환경조건에 따라 설계기준 압축강도로 제한하고 있으나 혼화재 혼입에 의해 염해 내구성이 급격히 향상되고 있음이 기존연구에서 명확히 되고 있으나 아직 규정에 반영되고 있지는 못한 실정이다. 본 연구에서는 레미콘의 배합을 분석하고 비교 시험체 제작을 통하여 염해 내구성에 대한 건축구조기준을 만족시키면서 경제성을 가지는 결과를 도출하고자 하였다. 시판되는 레미콘의 경우 설계기준 압축강도 이상의 강도와 그에 따른 염소이온 차단성을 가지며 전 배합조건에 대해서 OPC 35MPa를 능가하는 성능을 확인할 수 있었다. 내구성 및 경제성을 동시에 달성하기 위해서 납품 전 사전배합을 실시하여 염해 저항성을 포함한 기본물성을 검토할 필요가 있다고 사료된다.

• 한국건축시공학회지
• /
• 제9권2호
• /
• pp.85-91
• /
• 2009

W/C and unit volume, which significantly affect quality of concrete related to strength and durability, are regulated at below $185kg/m^3$ for regular concrete generally used in standard specification for constructions. The aim of this research is to develop chemical admixture and find out its potential use by identifying characteristics of admixtures added to soft concrete and hardening concrete, of which content ratio of component for each type of admixtures is subject to change in accordance with unit volume within KS' allowable range. Sodium gluconate, polyoxyethylene nonylphenyl ether, poly carboxylic copolymer in slump, which is characteristic of soft concrete, are deemed highly sensitive while there is no air entrainment except for $10\sim70%$ in WE, WR component content ratio and NP. In hardening concrete, strength in general showed higher action in compressive strength and tensile strength than in plain strength. Use of proper AE agent and AE water reducing agent at the same time is deemed to be used as chemical admixtures capable of manufacturing high-quality, high-quantity concrete.