• 한국터널지하공간학회 논문집
• /
• 제14권1호
• /
• pp.93-105
• /
• 2012

대부분의 터널 조명은 인공조명에 의존하고 있어 조명설비의 유지관리비 및 전력비를 절감하기 위해 자연채광을 적용한 기초연구가 선행되었다. 이에 본 연구는 터널 조경 바형식 반사거울시스템의 채광성능(조도, 휘도)을 평가하였다. 수평면 조도를 측정한 결과, 전체 평균 1,170 lx로 미설치 대비 6.5배 이상 증가하여 채광유효구간에서 구간별 터널기준조도(KSA 3703)를 만족시키는 것으로 나타났으며, 터널 밖으로 나오는 반대편 차로 운전자의 휘도를 측정하여 분석한 결과, 전체 평균 3.01로 현휘 기준치인 10 이내로 평가되어 눈부심이 발생하지 않는 것으로 나타났다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권2호
• /
• pp.184-193
• /
• 2015

This paper proposes a cost-efficient and automatic method for large data acquisition from a test chip without expensive equipment to characterize random process variation in an integrated circuit. Our method requires only a test chip, a personal computer, a cheap digital-to-analog converter, a controller and multimeters, and thus large volume measurement can be performed on an office desk at low cost. To demonstrate the proposed method, we designed a test chip with a current model logic driver and an array of 128 current mirrors that mimic the random process variation of the driver's tail current mirror. Using our method, we characterized the random process variation of the driver's voltage due to the random process variation on the driver's tail current mirror from large volume measurement data. The statistical characteristics of the driver's output voltage calculated from the measured data are compared with Monte Carlo simulation. The difference between the measured and the simulated averages and standard deviations are less than 20% showing that we can easily characterize the random process variation at low cost by using our cost-efficient automatic large data acquisition method.

• 대한한의학원전학회지
• /
• 제24권5호
• /
• pp.107-118
• /
• 2011

Classified Emergency Materia Medica is a pharmacopoeia published by the government of the Song(宋) dynasty. After publishment, it had a decisive effect on East-Asian herbology of China, Korean & Japan. Sakae Miki(三木榮), Tameto Okanisi(岡西爲人) wrote papers on the subjects of type, publishing process, bibliographic terms of Classified Emergency Materia Medica published in the early and middle years of Joseon Dynasty. Moreover, Sakae Miki claimed that Classified Emergency Materia Medica from China had been a standard of herbology of Joseon Dynasty since its publishment, and herbology based on materia medica from countryside(鄕藥) also had occupied a part of herbology in Joseon Dynasty. Nevertheless the specific influences, from Classified Emergency Materia Medica to the medical books of Joseon Dynasty which established the herbology based on materia medica from countryside has never been handled so far. So I would like to investigate the influence of Classified Emergency Materia Medica to Joseon Dynasty, through a comparison with literature review. The main literatures for comparison are two representative medical books of Joseon Dynasty, Compendium of Prescriptions from the Countryside(1433) & Treasured Mirror of Eastern Medicine(1613), especially focusing on the pharmacognostic parts. The main comparing points on researching literatures will be the following: publication year of books; order of herbs; and quotations. This paper will show which edition of Classified Emergency Materia Medica was utilized to publish two medical books of Joseon Dynasty, and the process how Korean herbology based on materia medica from countryside was transformed after accepting Chinese herbology.

• 한국전문물리치료학회지
• /
• 제18권2호
• /
• pp.27-34
• /
• 2011

The aim of this study was to determine the effect of action-observation training on arm function in people with stroke. Fourteen chronic stroke patients participated in action-observation training. Initially, they were asked to watch video that illustrated arm actions used in daily activities; this was followed by repetitive practice of the observed actions for 3 times a week for 3 weeks. Each training session lasted 30 min. All subject participated 12 training session on 9 consecutive training days. For the evaluation of the clinical status of standard functional scales, Wolf motor function test was carried out at before and after the training and at 2 weeks after the training. Friedman test and Wilcoxon signed rank test was used to analyze the results of the clinical test. There was a significant improvement in the upper arm functions after the 3-week action-observation training, as compared to that before training. The improvement was sustained even at two weeks after the training. This result suggest that action observation training has a positive additional impact on recovery of stroke-induced motor dysfunctions through the action observation-action execution matching system, which includes in the mirror neuron system.

• Archives of Plastic Surgery
• /
• 제42권3호
• /
• pp.356-360
• /
• 2015

In plastic surgery, patient photography is a vital component of clinical, educational, legal, and research documentation. Optimal acquisition of photographic data requires a dedicated photography studio or a three-dimensional anatomic scanner, both of which are financially impractical for most clinicians. Simplified photo standardization is proposed for use in random clinical settings by using a portable device called the Mirror Stand (MirS). This model device aims to mimic a studio environment by incorporating the basic elements of producing consistent photographs. The pilot MirS is designed for facial photography. Images of 40 random subjects were obtained using the MirS with three different cameras. Real anthropometric measurements of each subject were collected, compared with the photographic measurements, and analyzed. In this study, all three cameras produced equally reliable measurements. Actual facial measurements were comparable to the photogrammetric measurements obtained from photographs taken using the MirS. A constant formula was derived; it allowed the conversion of photographic values into real anthropometric values. The MirS produced consistent photographs with respect to the measurements. The photographs obtained could be translated reliably into their real anthropometric measurements. Therefore, the MirS can be applied in daily practice, providing an efficient alternative for obtaining a standard justifiable photograph.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.107-112
• /
• 2017

An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.451-454
• /
• 2015

본 논문에서는 저전압, 저전력 회로에 적합하고, $0.35{\mu}m$ 공정을 이용한 3가지의 OTA를 제시한다. 첫 번째는 1V의 공급전압과 $1.774{\mu}W$의 소비전력을 사용하며 모든 트랜지스터들이 strong inversion 영역에서 동작한다. Bulk 입력으로 인해 줄어든 gm을 보상하기 위해서 Gm-enhancement 기법을 사용하였고, 저전압으로 동작하는 Wide swing current mirror, Class-A output을 적용하였다. 두 번째는 0.8V의 공급전압과 52nW의 소비전력을 사용하여 112dB의 높은 이득을 가지는 2-stage OTA이다. Current mirror는 두 개의 MOS의 Gate를 묶는 Composite Transistor 구조를 사용하여 마치 Cascode와 같은 효과를 주어 출력저항을 높여주었다. 세 번째는 0.6V의 공급전압과 160nW의 소비전력을 사용하여 77dB의 이득을 가지는 2-stage OTA이다. 두 번째 증폭 단에 추가적인 바이어스전압이 필요하지 않으면서 증폭할 수 있도록 Common Gate 구조로 구현하여 Level Shift 기능을 사용하였다.

• 한국광학회지
• /
• 제29권4호
• /
• pp.166-172
• /
• 2018

본 논문에서는 우주의 진공환경에서 반사경 코팅이 흡수한 습기를 방출하면서 나타나는 경면 형상의 변화를 예측하기 위한 새로운 방법론을 제안한다. 직경 50 mm, 두께 1.03 mm의 원형 시편과 간섭계를 통해 진공환경에서 나타나는 시편 형상 변화량을 측정하고 제르니케 프린지 다항식(Zernike fringe polynomial) 곡률항으로 나타내었다. 그 결과 습기 방출에 따른 코팅 스트레스는 152.7 Mpa로 계산되었다. 계산된 스트레스는 1.25 mm 두께 시편의 수치모사 모델에 적용하여 변화된 형상의 곡률항을 측정결과의 표준편차 이내($78.9{\pm}5.9nm$)로 예측할 수 있음을 검증하였다. 이 방법론을 2019년에 발사 예정인 차세대중형위성의 직경 600 mm 쌍곡면경에 적용, 습기 방출에 의한 경면 형상 변화를 계산하여 반사경의 초점거리가 약 $2.005{\mu}m$ 만큼 ?아짐을 예측하였다. 초점거리 변화는 광학 탑재체의 MTF를 한계공간주파수(Nyquist frequency)에서 2.3% 가량 낮추지만, 요구 사양을 만족하여 우주에서도 문제없이 운용 가능함을 확인하였다.

• 전자공학회논문지SC
• /
• 제37권3호
• /
• pp.44-54
• /
• 2000

본 논문에서는 표준 메모리 공정에 구현 가능한 주파수 적응성을 갖는 부지연 회로의 설계기법에 대해 제안한다. 제안하는 설계기법은 기본적으로 아날로그 SMD (synchronous mirror delay) 형태의 부지연 회로로서 입력클록의 주기와 구현하고자 하는 부의 지연 시간의 차이에 해당하는 시간을 아날로그 회로의 개념으로 측정하고 다음 번 주기에서 반복한다. 출력클록의 발생과 관련되는 부수적인 지연을 측정단의 앞 단인 지연모델 단에서 상쇄하는 기존의 SMB 기법과는 달리, 반복단에서 상쇄하는 새로운 기법을 통하여 넓은 부지연 범위를 구현하여 특히 고속동작에서의 부지연 특성을 원할하게 한다. 또한 넓은 범위의 주파수 동작범위를 구현하기 위해 해당하는 주파수 범위에서 아날로그 회로가 최적의 동작 조건을 갖추도록 하기 위한 새로운 주파수 감지기 및 최적조건 설정기법을 제안한다. 제안된 회로의 응용으로서 초고속 DRAM인 DDR SDRAM에 적용하는 예를 보였으며, 0.6㎛ n-well double-poly double-metal CMOS 공정을 사용하여 모의실험 함으로써 그 유용성을 입증한다.

• 한국전자파학회논문지
• /
• 제27권2호
• /
• pp.212-215
• /
• 2016

본 논문에서는 $0.18{\mu}m$ CMOS 공정을 사용하여 5.08 GHz에서 동작하는 링 전압 제어 발진기(Ring Voltage Controlled Oscillator, Ring VCO)를 제작하였다. Ring VCO는 3단 구조로 각 단의 트랜지스터 크기 비율을 다르게 하여 전류 변화에 따른 소모 전력이 달라짐을 확인하였다. Core의 양단 위, 아래에는 Current Mirror로 전류를 제어하도록 구성하였고, 주파수 조절을 위해 제어 전압을 추가하였다. Ring VCO 측정 결과, 주파수 범위는 65.5 %(1.88~5.45 GHz), 출력 전력 -0.30 dBm, 5.08 GHz 중심주파수에서 -87.50 dBc/Hz @1 MHz의 위상잡음을 갖는다. 또한, 2.4 V 전원에서 31.2 mW 소모 전력을 확인하였다.