• 한국안전학회지
• /
• 제21권4호
• /
• pp.73-84
• /
• 2006

Standard safety management cost system was established in 1988 as a decree Number of 88-13, first time. And then, it has been revised fourteen times, up to now. A lot of practical investigations have been made for the revision but many problems at sites are continued to be put out so that it should be revised. This study is to find out hazard level of each work kinds through questionnaire and interview and investigate analyze the status which standard safety management costs have been used. Also, this study is to show reasonable rates of standard safety management costs in construction industry and to set up countermeasures against those problem after reviewing its status in korea with in Japan and Europe. Budget and actually performed amount of safety management costs in this study are investigated. costs for temporary work which is clarified in Japan is collected in order to compare domestic cost rate with Japanese one related to the total project amount. This study is to investigate eleven project kinds of domestic system, first, and to investigate eleven items of apartment bldg, office, civil work such as bridge, tunnel, dam, plant etc, secondly. Additionally, three items of gymnasium, railway, particular steel tower are investigated in this study. Also this study is to investigate and analyze performed costs of presently processing worker finished work so that it shows a new reasonable rate against standard safety management costs in construction industry, in order to make basical data and material to be systemized.

• 한국건설관리학회논문집
• /
• 제14권3호
• /
• pp.115-122
• /
• 2013

표준품셈은 공공공사의 예정가격 산정을 위한 기초자료로 사용되어 왔다. 이는 매년 제 개정 업무가 수행되고 있으며 그로인해 많은 인원과 시간이 소요되고 있다. 이러한 문제점을 해결하기 위해 본 논문은 싸이클론을 활용한 방법론을 제시한다. 품셈산출을 위해 보조적 작업 및 비생산적 작업을 시뮬레이션 모형에 용이하게 반영할 수 있도록 품셈모듈을 개발하여 적용하는 방법론을 제시한다. 이에 본 연구는 알루미늄 폼 공정을 대상으로 싸이클론 시뮬레이션 및 워크샘플링 기법을 적용하여 품을 산출하고 그 결과를 비교하여 품셈모듈이 탑재된 싸이클론 모델이 품셈 제 개정 업무에서에 효율성 및 사용성이 있음을 검증한다.

• 한국항공운항학회지
• /
• 제20권4호
• /
• pp.14-20
• /
• 2012

A properly determined separation minima applied in Air Traffic Management(ATM) is critical for safe and efficient aircraft operations. The separation minima is primarily determined by the accuracy performance of surveillance system, and, due to the stringent aviation safety standard, the position accuracy of the surveillance system must be estimated with a high level of reliability. This study proposed a method for estimating the position accuracy of surveillance system with a relatively small amount of data by finding upper confidence limit instead of maximum likelihood values of unknown parameters. Through the proposed method, it is possible to determine a required separation minima with a more reliability in the face of data scarcity which often occurs when we implement a new surveillance system such as Automatic Dependent Surveillance-Broadcast (ADS-B).

• 품질경영학회지
• /
• 제4권1호
• /
• pp.20-24
• /
• 1976

The higher develops the industrial techniques, the more reliability of mac hi nary, equipments and systems want the consumers. So, it is a key to succeed in the new-product development that the consumers can put reliance on the product to be made in the product design stage. This study intends to help the product designer and the system manager by presenting them better reliability prediction techniques. For this purpose, the author built some fundamental reliability system models. And then predict the system reliability by estimating the elemental component's failure rate ${\lambda}_i$, and proposed an evaluation model. And also, a system is wrong according to the component's characteristics' degradation, we must estimate the degradation failure rate (average and standard deviation). For this, the "Moment method" is used.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.99-103
• /
• 2000

This paper describes the development of standard series for turbo blowers. In mass production system, it is very required to standardize blowers to improve the productivity of ordering, estimating, manufacturing. To standardize blowers, we performed researches on the effects of $b_1$(impeller inlet width), $b_2$(impeller outlet width), ${\beta}_1$(blade inlet angle), ${\beta}_2$(blade outlet angle), Z(number of blades) of impellers and geometry of casing experimentally. Through this study, we chose the several best model of turbo blowers with high efficiency and low noise, which represent each specific speed series 63, 80, 100, 125, 160, 200, 250, 315. After the development of such standardized blowers, the test results are used to prepare the fan geometry and performance database for a selection software.

• 한국물환경학회지
• /
• 제35권6호
• /
• pp.481-496
• /
• 2019

The Ministry of Environment has measured streamflow at eight-day intervals for the estimation of standard flow of the Total Maximum Daily Loads (TMDL) system. This study identified the availability of the partially measured the eight-day interval data for estimating standard flow and found the optimal extension techniques of standard flow. The study area was selected for the Nakbon-A watershed in the Nakdong River, and four streamflow record extension techniques of standard flow were considered: extension, percentile, drainagearea, and regional regression methods. The flow duration curve (FDC) using the eight-day interval streamflow data indicated very high Nash and Sutcliffe Efficiency (NSE) values above 90 % from FDC-II to FDC-VII compared to FDC-VIII, the standard FDC. This result demonstrates that FDC using daily data of three-six cumulative years could represent standard FDC fairly well. For the streamflow record extension techniques of standard flow, the percentile method was selected as the optimal alternative, showing the minimal difference from FDC-VIII. These results validate the availability of the eight-day interval streamflow data in the standard flow estimation and the application of extension techniques. It seems that these results could reduce the uncertainty of partially measured streamflow data for water quantity and quality management.

• 설비공학논문집
• /
• 제19권6호
• /
• pp.427-433
• /
• 2007

Generally, H.V.A.C load capacity in early planning phase can presume with maximum thermal load. Basic data can prove by air conditioning equipment system data analysis at existing building. There are poor and not reliable alternative presentation. In this paper, measured data after use H.V.A.C load calculation K-load program reply choosing standard building and variables simulation. And I founded peak load correlation graph and mode for several kinds of variable and contents of size. I wish that equipment designer is beaconed to produce optimum capacity at building as quantitative through this result.

• 한국수산과학회지
• /
• 제41권1호
• /
• pp.54-60
• /
• 2008

High- and multi-frequency acoustic systems can measure a zooplankton patch successively and estimate the spatial distribution and abundance of zooplankton according to size using a multi-frequency inversion (MFI) method. This study measured zooplankton distribution to a depth of 150m using a multi-frequency acoustic system (TAPS-6), installed on a CTD system with a fluorometer and analyzed it using the MFI method. Simultaneously, zooplankton samples were collected by north pacific standard (NORPAC) net to confirm the species composition. The results showed that the combined method is valuable for estimating the zooplankton profile in detail and investigating the relationship between the zooplankton and phytoplankton profiles.

• 한국건설관리학회논문집
• /
• 제23권5호
• /
• pp.65-76
• /
• 2022

국내 건설기술의 발전을 도모하고 국가경쟁력을 제고하기 위한 목적으로 1989년 도입된 건설 신기술 지정제도는 심사과정에서 신기술의 원가계산서를 검토하고, 설계·시공 공사비, 유지관리비 등 비용절감효과와 공사기간 단축 효과를 경제성 항목으로 평가하고 있다. 그러나 이 과정에서 고유기술에 대하여 공사비산정기준관리기관과 신기술 개발자간의 의견차이가 빈번히 발생하고 있으며, 또한 현행 신기술에 대한 원가산정기준이 단위수량당 소요량만을 제시하는 방식으로 생산성에 대한 정보가 부재하여 기존 유사 기술과의 공사기간에 대한 객관적인 비교가 어려운 실정이다. 본 연구에서는 건설 신기술 심사 시 원가산정기준 검토절차와 심사기준, 신기술 품셈 작성방법 등 현황을 분석하고 해외 원가산정기준과 비교하여 현행 건설 신기술의 원가산정기준 개선방안을 제시하였다. 제시한 개선방안은 작업조 기반의 생산성 정보를 제공하고, 적용단가를 제시하여 원가기준의 투명성을 확보할 수 있도록 구성하였으며, 신기술의 특성을 고려하여 재료비와 기계경비에 대한 원가정보 역시 제공할 수 있도록 하였다. 본 연구의 개선된 원가산정 기준을 통해 발주자에게 신기술에 대한 원가정보를 현행보다 세부적으로 제공하고, 공사비 산정 과정을 보다 간소화함으로써 건설 신기술의 활용과 현장적용성을 향상시킬 수 있으리라 기대된다.

• 한국정보통신학회논문지
• /
• 제22권9호
• /
• pp.1243-1249
• /
• 2018

본 논문에서는 IEEE 802.15.4 슬롯 기반 CSMA/CA(Slotted Carrier Sense Multiple Access with Collision Avoidance) 네트워크에서 시스템 처리율 향상을 위해 동작 중인 단말 수 추정을 통한 백오프 기간 튜닝 기법을 제안한다. IEEE 802.15.4 슬롯 기반 CSMA/CA 네트워크에서는 각 단말이 채널을 항상 센싱하지는 않으므로, 제안하는 기법에서는 채널을 항상 센싱할 수 있는 PAN(Personal Area Network) 코디네이터를 사용하여 동작 중인 단말 수를 추정한다. 이 때, 실시간 단말 수 추정을 위해 단순 이동 평균 필터를 사용한다. PAN 코디네이터는 추정한 단말 수에 따라 튜닝한 최적의 백오프 기간을 비콘 프레임에 담아 PAN 코디네이터에 연결된 단말들에게 전달한다. 시뮬레이션을 통해 제안하는 기법의 단말 수 추정에 대한 성능과 시스템 처리율에 대한 성능을 평가한다. 시뮬레이션 결과를 통해 제안하는 기법이 IEEE 802.15.4 표준보다 더 높은 시스템 처리율을 얻을 수 있음을 보인다.