• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.31-38
• /
• 2008

This paper describes sensor network system implementation for the IEEE 1451.2 standard which guarantees compatibilities between various wired sensors. The proposed system consists of the Network Capable Application Processor(NCAP) in the IEEE 1451.0, the Transducer Independent Interface(TII) in the IEEE 1451.2, the Transducer Electronic Data Sheet(TEDS) and sensors. The research goal of this study is to minimize and optimize system complexity for IC design. The NCAP is implemented using C language in personal computer environment. TII is used in the parallel port between PC and an FPGA application board. Transducer is implemented using Verilog on the FPGA application board. We verified the proposed system architecture based on the standards.

• Journal of Information Management
• /
• v.37 no.2
• /
• pp.1-20
• /
• 2006

It has lately been recognized that the sharing and exchanging of the research results information is the critical factor to improve the research productivity. So many institutions are planning or developing the information systems which provide the research information services for researcher. But it has very difficulty in integrating the research resources information due to the dispersion and heterogeneity in data sources, and semantic and structural difference in describing data. We propose the semantic web based methodology and conceptual framework for raising the interoperability of metadata about research results information, which will support the integration of the distributed research data for information services in the end. We first introduce the ontology which is developed based on Standard Metadata of Research Results Information published by STISC. Then to show the applicability in real-world environment, we express the metadata of research information in RDF/RDFS according to ontology. Finally we proposed the conceptual architecture of research information service system which shows the main components, the functional requirements, and the principal and design direction at implementing the system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.25 no.2
• /
• pp.86-93
• /
• 2024

This study evaluates the stability of a 4.99-ton small coastal fishing boat using data interpreted according to the second-generation intact stability criteria of the International Maritime Organization (IMO). The focus is on the ship's behavior under surfriding/broaching conditions during sea navigation, ensuring compliance with international standards. The data processing procedures presented apply stricter criteria than the first-generation intact stability standards to assess the ship's intact stability in waves. However, if the vessel deviates from its standard condition, a separate intact stability assessment based on actual loading conditions is necessary. The surfriding/broaching data processing procedures utilized a program developed by the Shipbuilding and Ocean Equipment Research Center at Kunsan National University. The results were analyzed and compared in detail according to the conditions, parameters, and criteria used for the calculations. Additionally, the study presents the results of Level 1 and Level 2 assessments according to IMO regulations, providing a parametric analysis of the small coastal fishing boat's stability. This allows for the evaluation of intact stability in hydrodynamic motion scenarios.tract.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.1
• /
• pp.23-33
• /
• 2012

In this study, how much users of Hannamkeumbuk Keumbuk Mountains are aware of Baekdaegan and its attached mountain chains, a traditional geographic system, according to Sangyungpyo and basic data like the degree of awareness and use-behaviors, etc. have been studied. In addition, the environmental value of Hannamkeumbuk Keumbuk Mountains separating the central and the southern part of Korea among attached mountain ranges, secondary mountain chains, which act as an ecosystem buffer in the Baekdudaegan Range, has been estimated at the current amount of currency. In the questions of the perception of the traditional classification standard of mountain chains and Baekdudaegan, more than 70% of respondents answered that they had heard of or known them but 66.8% werenot aware of Hannamkeumbuk Keumbuk Mountains. While the awareness for Baekdudaegan is high, the perception of its attached mountain chains was very poor. DBDC responder system and CVM, which is used widely for the value estimate method of environment goods, were used. As the result, an additional benefit got when a person visits Hannamkeumbuk Keumbuk mountains was estimated as 5,813 won. It could find out that this amount was very low compared with 51,984 won, average visit cost. It judged that the reason was that damage of environmental conditions, the monotony of the trails and progress of indiscriminate environmental destruction, etc. The results of this study will offer a new perspective on public relations activities and resource conservation of Baekdudaegan and its attached mountain chains and estimate perceptions and efficient services for visitors to HannamKeumbuk Keumbuk Mountains. This study will act as data for basic planning and management to increase the mountains' value and to preserve them. Further studies are needed to make a frame of work division and management with various organizations so that the management of Hannamkeumbuk-Keumbuk Mountains may be properly established and their value may been hanced.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.3
• /
• pp.39-50
• /
• 2011

This study furnishes basis data for plan foundation and proper valuation of view by presenting objective and concrete selection standards and ways of Landscape Control Point(LCP) on valuation of development projects. To sum up the results of study, it establishes the prospect, publicity and direction of view as a selection standard LCP on precedent studies. The prospect, which includes visual range, direction of view, geographical features, and visibility, sets up as a valuation basis picking out the available places which have alterations according to direction and distance in practice. In the case of publicity, to select the place as there presentative area where public activities often happen than others, thirteen evaluation indexes including administration facilities, educational facilities, commercial facilities and so on. And variation of landscape is set up as an assessment index to know how much the land has changed from the beginning to the end of development. To apply the selection standards to sample places, the preliminary LCP is founded by analyzing both the prospect and published; a series of courses for selecting the final LCP is founded by analyzing the preliminary LCP and variableness of landscape on a basic of placed which have many alterations of view. At last, in the case of a selection system for LCP, the preliminary LCP is founded by analyzing both the prospect and publicity; a series of courses for selecting the final LCP is found by analyzing the preliminary LCP and variableness of landscape. Applying selection standards and the assessment index to the Sam-deok 3 residence improvement area, in the case of prospect, the southern distant view area has the largest extent. Next, the results of the assessment using the system of publicity show that a five-lane road is taking up the largest area. Hence, a total of 48 preliminary LCPs are set up by analyzing both the prospect and publicity. The results of analyzing landscape variation, one of the valuation indexes, show that Sam-deok dong around the post office has the highest rate of variation at 28.07%. Finally, three LCPs in each part, which are close range, middle range and distance view, are selected; thus, a total of nine LCPs are selected. The selected LCPs that go through a series of practical courses like a GIS program have a lot of professional opinions and are expected to secure objectivity of landscape assessment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.1-8
• /
• 2010

The purpose of the study was to evaluate the influence of landscaping pavements on WBGT(Wet-Bulb Globe Temperature) of outdoor spaces that lack ventilation and shade at summer midday. The relative humidity(RH), dry-bulb temperature(DT) and globe temperature(GT) were recorded every minute from June to October 2009 at a height of 1.2m above ten experimental beds with different pavements, by a measuring system consisting of an electric humidity sensor(GHM-15), resistance temperature detector(RTD, Pt-100), standard black globe(${\phi} 150mm$) and data acquisition systems(National Instrument's Labview and Compact FieldPoint). Additionally, the surface dry-bulb temperatures also were recorded and compared. The area of each experimental bed was 1.5m(W)${\times}$2.0m(L) and ten different kinds of pavement were used including grass, grass+cubic stone, grass+porous brick, brick, stone panels, cubic stone, interlocking blocks, clay brick, naked soil, gravel and concrete. To prevent interference from ventilation, a 1.5m height cubic steel frame was established around each bed and each vertical side of the frame was covered with transparent polyethylene film. Based on the records of the hottest period from noon to 3 PM on 26 days with a peak dry-bulb temperature over $30^{\circ}C$ at natural condition, the wet-bulb temperature(WT) and WBGT were calculated and compared. The major findings were as follows: 1. The average surface DT was $40.1^{\circ}C$, which is $9^{\circ}C$ higher than that of the natural condition. The surface DT of the pavements with grass were higher than those of concrete and interlocking block. The peak DT of the surface almost every pavement rose to above $50^{\circ}C$ during the hottest time. 2. The averages of DT, WT and GT were $40.1^{\circ}C$, $27.5^{\circ}C$ and $49.1^{\circ}C$, and the peak values rose to $48.1^{\circ}C$, $45.8^{\circ}C$ and $59.5^{\circ}C$, respectively. In spite of slight differences that resulted according to pavements, no coherent differentiating factor could be found. 3. The average WBGT of grass was the highest at $34.3^{\circ}C$ while the others were similar in the range of around $33{\pm}1^{\circ}C$. Meanwhile, the peak WBGT was highest with stone panel at $47.9^{\circ}C$. Though there were some differences according to pavements, and while grass seemed to be worst in terms of WBGT, it seems difficult to say ablolutely that grass was the worst because the measurement was conducted without ventilation and shade during summer daytime hours only, which had temperatures that rose to a dangerous degree(above $45^{\circ}C$ WBGT), withering the grass during the hottest period. The average WBGT resulted also showed that the thermal environment of the pavement without ventilation and shade were at an intolerable level for humans regardless of the pavement type. In summary, the results of this study show that ventilation and shade are more important factor than pavement type in terms of outdoor thermal comfort in summer daylight hours.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.40-50
• /
• 2016

The objective of this study is to suggest basic data for establishing future urban agriculture vitalization policies, by analyzing the preference of urban agriculture types in accordance with lifestyle as the standard of living for urban residents is improved. A survey was conducted targeting residents of nine autonomous regions that have established grounds for supporting the urban agriculture vitalization by enacting an urban agriculture ordinance, among 25 autonomous regions of Seoul. It aimed to verify a causal relationship between lifestyle and preferred activity of urban agriculture. In the results of the study first, a 'Health pursuit-type' was significant within the 'urban type' urban agriculture. These urban residents, pursuing safe food and health, actively participated in urban agriculture educational programs, and also preferred urban agricultural activities such as planting plants, landscape crops for the improvement of natural scenery in the downtown, and also participating in urban agriculture fairs. Second, 'Leisure activity-type' was significant with the 'House advantage type' urban agriculture. Urban residents mostly emphasizing hobby and leisure activities preferred the 'House advantage type' urban agricultural activities such as tending a vegetable garden in indoor life or using the veranda space of an apartment. Third, 'Health pursuit-type' was significant with the 'Schooling type' urban agriculture and 'Farm and Park type' urban agriculture. Urban residents pursuing health preferred tending an educational-type vegetable garden and educational farm connected to schools, running private farms outside of the downtown, and actively participating in urban agriculture park. Fourth, 'The neighborhood type' was significant with the 'Schooling type' urban agriculture. 'The neighborhood type' urban residents preferred actively participating in diverse urban agriculture education activities. The significance of this study is to examine the tendency and preferred activities of end users of urban agriculture by suggesting the necessity of viewing urban agriculture from the aspect of a consumer, and then examining the influential relationship between lifestyle and preference of urban agriculture-types.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.1
• /
• pp.39-48
• /
• 2019

Based on the bidding data of the national marketplace for public procurement service from 2003 to 2015, this study investigated and analyzed the bidding trends of the landscape management public consignment service by analyzing total bidding, type, client, region, license. The results are as follows. First, the total number of bids for civilian consignment services in landscape management increased by 1,112 cases, corresponding to a 487.7% increase over 10 years, and the total bidding amount increased by 144,504 million won, corresponding to a 382.5% increase. Second, in 10 years, the proportion of landscape management in landscaping works increased by 10%, and the bidding amount increased by 3%. Third, in the analysis of bidding trends by type, green areas showed the greatest growth in the number of bids, while the greenery of buildings showed the highest increase in the bid amount. Fourth, local autonomous entities, Gyeonggi province, and the landscaping planting construction industry showed the highest increase in the number of bids and the amount in each field such as client, region, and license. In summary, the number of cases and the bidding amount is increasing year by year. Considering the increasing number of users and demands thereof, the number of bids and the amount of consignment service for landscape management will continue to increase. The purpose of this study is to investigate and systematically analyze the tendency of bidding for 10 years for the private consignment service of landscape management in the current situation, where the importance of landscape management is increasingly emphasized. Another purpose of this study is to discern the necessity of the landscape management business and to provide the basis for incorporating the landscape management business into the professional construction industry in the future, thus providing opportunities for widening the expertise and diversity of the landscaping field. For the following study, the legal basis of landscape management, qualification, equipment standards, calculation of management cost per unit, and the appropriateness of the management cost should be considered.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.3
• /
• pp.21-36
• /
• 2023

As a solution to environmental issues, such as climate change response, the carbon neutrality strategy, urban heat islands, fine dust, and biodiversity enhancement, the value of urban green spaces and trees are becoming important, and various studies dealing with the effects of trees for environmental improvement are being conducted. This study comprehensively considers the preceding studies on planting tree species, planting structure, planting density, and planting base to propose a direction for the planting renewal of green areas in urban parks and applies the findings to a renewal plan to improve the urban environment through landscaping trees. A field survey was conducted on the planting status of Seoul Children's Grand Park, a large-scale neighborhood park in Seoul, and based on the survey data, a planting function evaluation was conducted, and areas needing improvement in planting function were identified. The planting function evaluation was carried out considering the park function setting, planting concept according to spatial function, and planting status. As a result of the study, the direction of planting renewal according to functional change was derived for each stage of planting function evaluation. Increasing the green area ratio is a priority in setting up park functions, but user convenience should also be considered. As a concept of planting, visual landscape planting involves planting species with beautiful tree shapes, high carbon absorption, and fine dust reduction effects. Ecological landscape planting should create a multi-layered planting site on a slope. Buffer planting should be created as multi-layered forests to improve carbon absorption and fine dust reduction effects. Green planting should consist of broad-leaved trees and herbaceous layers and aim for the natural planting of herbaceous species. For plant species, species with high urban environment improvement effects, local native species, and wild bird preferred species should be selected. As for the planting structure, landscape planting sites and green planting sites should be composed of trees, shrubs, and trees and herbaceous layers that emphasize ecology or require multi-layered buffer functions. A higher standard is applied based on the planting interval for planting density. Installing a rainwater recycling facility and using soil loam for the planting base improves performance. The results of this study are meaningful in that they can be applied to derive areas needing functional improvement by performing planting function evaluation when planning planting renewal of aging urban parks and can suggest renewal directions that reflect the paradigm of functional change of created green areas.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.2
• /
• pp.51-63
• /
• 2024

While the government policy to fully adopt BIM in the construction sector is being implemented, the construction and utilization of landscape BIM models are facing challenges due to problems such as limitations in BIM authoring tools, difficulties in modeling natural materials, and a shortage in BIM content including libraries. In particular, plants, fundamental design elements in the field of landscape architecture, must be included in BIM models, yet they are often omitted during the modeling process, or necessary information is not included, which further compromises the quality of the BIM data. This study aimed to contribute to the construction and utilization of landscape BIM models by developing a plant library that complies with BIM standards and is applicable to the landscape industry. The plant library of trees and shrubs was developed in Revit by modeling 3D shapes and collecting attribute items. The geometric information is simplified to express the unique characteristics of each plant species at LOD200, LOD300, and LOD350 levels. The attribute information includes properties on plant species identification, such as species name, specifications, and quantity estimation, as well as ecological attributes and environmental performance information, totaling 24 items. The names of the files were given so that the hierarchy of an object in the landscape field could be revealed and the object name could classify the plant itself. Its usability was examined by building a landscape BIM model of an apartment complex. The result showed that the plant library facilitated the construction process of the landscape BIM model. It was also confirmed that the library was properly operated in the basic utilization of the BIM model, such as 2D documentation, quantity takeoff, and design review. However, the library lacked ground cover, and had limitations in those variables such as the environmental performance of plants because various databases for some materials have not yet been established. Further efforts are needed to develop BIM modeling tools, techniques, and various databases for natural materials. Moreover, entities and systems responsible for creating, managing, distributing, and disseminating BIM libraries must be established.