• 벤처창업연구
• /
• 제10권6호
• /
• pp.47-57
• /
• 2015

본 논문은 성공한 창업초기기업을 대상으로 기업집단 소속기업에 비해 독립기업이 과연 외부로부터 자금을 조달하는 데 더 큰 어려움을 겪고 있는지를 분석하였다. 외부자금조달의 용이성은 투자-현금흐름 배수로 측정하였고, 이 배수가 과거실적에 의해 영향 받는 부분과 미래 영업에 대한 기대에 의해 영향 받는 부분을 모두 통제한 뒤, 기업집단 소속 여부가 투자-현금흐름 배수에 미치는 영향을 살펴보았다. 분석 결과, 현금흐름이 양수일 때는 오히려 독립기업이 유의적으로 더 높은 투자-현금흐름 배수를 기록하였음이 밝혀졌다. 그러나 현금흐름이 음수일 때는 유의성이 낮으나마 그 반대의 현상이 목격되었다. 이러한 결과는 성공한 독립기업의 경우 창업초기에 기업집단 소속기업에 비해 자금조달에 더 큰 어려움을 겪는다는 일방적인 주장을 할 수 없음을 시사한다. 만약 기업집단 소속기업이 창업초기에 외부자금조달에 큰 문제가 없다면, 위의 결과는 독립기업도 마찬가지로 창업초기에 외부자금조달을 중요한 애로사항으로 느끼지 않고 있음을 뜻한다. 따라서 향후 성공가능성에 상관없이 모든 창업 벤처기업에게 혜택을 주는 보편적인 정책이 아니고 성공할 기업을 가려내서 이들에게만 혜택을 주는 선별적인 정책을 정부가 추구한다면, 창업초기기업에 대한 지원정책 중 자금지원 정책은 그 우선순위가 낮아져야 할 것이다.

• 전기학회논문지
• /
• 제65권2호
• /
• pp.239-246
• /
• 2016

In recent years, the power demand has been increasing steadily and the occurrence of maximum power demand has been moving from the summer season to the winter season in Korea. And since the control of electric power supply and demand is more important under those situations, a micro-grid system began to emerge as a keyword for the sTable operation of electric power system. A micro-gird power system is composed of various kinds of distributed generators(DG) such as small diesel generator, wind turbine, photo-voltaic generator and energy storage system(ESS). This paper introduces a method to determine the optimal capacities of the distributed generators which are installed in a stand-alone type of microgrid power system based on the fundamental proportion of diesel generator. At first, the fundamental proportion of diesel generator will be determined by changing from 0 to 50 percent. And then we will optimize the capacities of renewable energy resources and ESS according to load patterns. Lastly, after recalculating the capacity of ESS with consideration for SOC constraints, the optimal capacities of distributed generators will be decided.

• 가족자원경영과 정책
• /
• 제16권2호
• /
• pp.145-163
• /
• 2012

The purpose of this study is to understand the process of "standing alone" in divorced single fathers on the basis of qualitative data collected through in-depth interviews with 10 divorced single fathers. Data were analyzed on the basis of grounded theory analysis in open coding, and 154 concepts, 39 sub-categories, and 14 categories were derived. According to the results of this study, the process phenomenon of divorced single fathers' standing alone was "the restraint and chaos of pain". This study could identify the consecutive process of four identified stages: marriage life's rupture, pain and chaos, deliberation and decision, and role adaption. In selective coding, the core category was "to pass through the restraint of pain and embrace children and stand alone". There were three types of standing alone: maintaining barely, enduring hopefully, and living initiatively. This study showed the necessity of social support and the basic data by type analysis through the process of standing alone. This study provided substantive knowledge generated through the voices of the persons concerned.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2195-2196
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server. Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.563-564
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server Fourth one was device solver. Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this Property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1229-1230
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server. Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer in main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1689-1690
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• 한국농촌건축학회논문집
• /
• 제25권3호
• /
• pp.17-25
• /
• 2023

The purpose of this study is to analyze the location and space composition of small elderly care facilities in gyeongsangnam-do and to present a desirable direction for planning small elderly care facilities. As a research method, the location and spatial composition of 82 facilities for elderly care facilities with a capacity of 10 to 29 installed in Gyeongsangnam-do were investigated. In particular, the location, site area, total floor area, and composition of major rooms of small elderly care facilities were analyzed. The results of the survey and analysis are as follows. First, as for location characteristics, 56.1% of the suburban and rural types, 28.1% of the urban area type, and 12.2% of the mountain type were found in order. Second, in the connection between location and spatial composition, stand-alone facilities accounted for 53.7%, and complex types accounted for 46.3%. Third, the average number of admissions was 23.1, and facilities corresponding to the size of 26-29 admissions were the largest at 41.0%. The total floor area per person was 28.3m². Fourth, in terms of the spatial composition of facilities, stand-alone facilities accounted for 53.7%, and complex types accounted for 46.3%. Fifth, by the number of people in the bedroom, 49.4% were installed in the order of a four-person room, 25.0% in a three-person room, 18.7% in a two-person room, and 3.5% in a one-person room. In addition, in the bedroom lifestyle, 84.1% of the bed type and 15.9% of the bed + sitting type were found.

• 한국CDE학회논문집
• /
• 제15권2호
• /
• pp.94-105
• /
• 2010

Todays, there is fast transition about the new manufacturing IT methodologies from the conceptual phase into the practical application phase for the strengthening of enterprise competitiveness in manufacturing industry. One of those new methodologies is PLM (Product Life-cycle Management). PLM methodology consists of 3D CAD for the product design, PDM (Product Data Management) for the data management based on the collaboration platform and lastly DM (Digital Manufacturing). DM has evoluted from the stand-alone computer simulation of early 1980s, and now it covers the overall production development and production. Unfortunately, there exist serious critical problems about the actual application of DM for the real work. This is owing to the transition of the point of view from stand-alone type application (such as flow simulation or robot simulation) to that of business process about product development and production management. In this paper, we propose an application framework for the successful project with the digital manufacturing methodology with the concept of Information Strategy Planning, which enables the systematic diagnosis and the quantitative evaluation. Also, we introduce the actual practice of the proposing framework with the ISP project for 'Analysis & Simulation Technique of manufacturing process project' that is being conducted by Chungnam Techno Park.

• 전력전자학회논문지
• /
• 제17권6호
• /
• pp.471-477
• /
• 2012

In this paper, in order to use module integrated converter using cascaded buck-boost converter for a low battery charger in stand-alone system, a charging algorithm which considers photovoltaic and battery status and PWM controllers which are changed according to charging modes are proposed. The proposed algorithm consists of constant current mode, constant voltage mode and maximum power point tracking mode which enables the battery to charge with maximum power rate. This paper also presents design of cascaded buck-boost converter that is the photovoltaic charger system. A 150W prototype system is built according to verify proposed the charger system and the algorithm.