• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.253-258
• /
• 1998

Staggered nested designs are the most popular class of unbalanced nested designs in practical fields. The most important features of the staggered nested design are that it has a very simple open-ended structure and each sum of squares in the analysis of variance has almost the same degrees of freedom. Based on the features, a class of unbalanced nested designs which is generalized of the staggered nested design is proposed. Some of the generalized staggered nested designs are shown to be more efficient than the staggered nested design in estimating some of variance components and their linear combinations.

• Journal of Information Display
• /
• 제2권2호
• /
• pp.22-26
• /
• 2001

This paper presents the idea of staggered voting for the efficient TMR implementation of shift register chains for improving the yield of Poly-Si TFT-LCD driving circuits. The paper discusses the characteristic features of staggered voting and performs a quantitative evaluation of its effectiveness. Staggered voting allows us to improve the reliability of a single-voter TMR chain significantly when the probability of a voter failure is not negligible.

• Steel and Composite Structures
• /
• 제46권3호
• /
• pp.403-416
• /
• 2023

This paper summarised and re-examined the theoretical basis of the commonly used design rule developed by Cochrane in the 1920s to consider staggered bolt holes in tension members, i.e., the s²/4g rule. The rule was derived assuming that the term two times the bolt hole diameter (2d₀) in Cochrane's original equation could be neglected, and assuming a value of 0.5 for the fractional deduction of a staggered hole in assessing the net section area. Although the s²/4g rule generally provides good predictions of the staggered net section area, the above-mentioned assumptions used in developing the rule are doubtful, in particular for a connection with a small gauge-to-bolt-hole diameter (g/d₀) ratio. It was found that the omission of 2d₀ in Cochrane's original equation appreciably overestimates the net section area of a staggered bolted connection with a small g/d₀ ratio. However, the assumed value of 0.5 for the fractional deduction of a staggered hole underestimates the staggered net section area for small g/d₀ ratios. To improve the applicability of the above two assumptions, a modified design equation, which covers a full range of g/d₀ ratio, was proposed to accurately predict the staggered net section area and was validated by the existing test data from the literature and numerical data derived from this study. Finally, a reliability analysis of the test and numerical data was conducted, and the results showed that the reliability of the modified design equation for evaluating the net section resistance of staggered bolted connections can be achieved with the partial factor of 1.25.

• 한국통신학회논문지
• /
• 제31권7B호
• /
• pp.668-678
• /
• 2006

정해진 대역폭 내에서 시청자의 대기시간과 요구되는 버퍼의 량을 줄이는 것은 주문형 비디오(VoD) 서비스 시스템 설계에서 중요한 요소였다. 하지만 기존의 제안된 많은 주문형 비디오 방법들의 높은 복잡도가 구현을 어렵게 하기 때문에, 최근에는 이와 더불어 주문형 비디오 방법의 복잡도를 줄이는 것도 중요한 요소로 간주되고 있다. 본 논문에서는 대역폭의 효율성도 높이면서 기존의 주문형 비디오 방법들의 복잡성을 크게 줄인 Fast Staggered 방식을 제안한다. 논문에서 제안하는 Fast Staggered 방식은 Fast Broadcasting의 높은 대역폭 효율과 Staggered Broadcasting 방식의 간단한 구조적 특징을 한꺼번에 가지고 있는 매우 실용적인 주문형 비디오 방법이다. 모의실험 결과 제안된 방식은 시청자 최대 대기시간이 Fast Broadcasting 방식과 거의 일치하고, 시청자 최대 버퍼 요구량은 매우 낮게 나타났다. 그리고 제안된 방식은 비디오 분할에 따라서 시청자의 대기시간과 필요한 버퍼량을 조절 할 수 있기 때문에 주문형 비디오 방식이 적용되는 환경에 따라서 조절해서 적용이 가능하다. 또한 주문형 비디오 방식의 복잡성도 함께 줄일 수 있는데, 제안된 방식은 비디오 데이터 세그먼트 수를 크게 줄이고, 복잡한 채널 관리를 줄였으며, 사용하는 채널의 수도 크게 감소시켰다. 본 논문은 Fast Staggered 방식의 서버 동작과정, 클라이언트 동작과정, 성능 모델, 모의실험을 통해 제안된 방식의 높은 효율성과 실용성을 제시한다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권5호
• /
• pp.640-649
• /
• 2017

목조건축의 기반을 넓히고 소비자의 만족도를 향상시키기 위해 기존의 일반목조벽체 및 기타 경량목조벽체에 대한 비교 연구가 필요하다. 따라서 본 연구에서는 일반벽체와 개선된 방식인 교호 샛기둥 벽체와의 성능 비교를 통해 새로운 가능성을 찾고자 하였다. 우선 교호 샛기둥 벽체의 강도적 특성을 평가하고 일반벽체의 강도적 특성을 비교하였다. 일반벽체를 구성하는 목재의 단면이 교호 샛기둥 벽체보다 크기 때문에 일반벽체의 최대하중이 교호 샛기둥 벽체 보다 크게 나타났다. 하지만, 두 그룹간의 통계분석에 의하면 95% 신뢰 수준에서 유의성을 보이지 않아, 교호 샛기둥 벽체는 일반벽체를 대체할 수 있는 가능성을 보여주었다. 교호 샛기둥 벽채는 샛기둥의 단면이 일반벽체보다 작기 때문에 재료를 절약할 수 있어서 일반벽체보다 더 경제적이라고 판단된다. 또한 단열재의 면적 또한 증가하므로 열교 현상의 개선도 기대된다.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.830-837
• /
• 2004

In this paper, the flow properties of staggered labyrinth seals are investigated. Leakage flowrates and pressure distributions are calculated for this seal. Then the dynamic stiffness and damping coefficients are calculated. The results are compared to the results of the some other papers.

• Earthquakes and Structures
• /
• 제5권5호
• /
• pp.607-624
• /
• 2013

In this study the seismic risk assessments of six- and twelve-story staggered wall system structures with three different structural variations were performed. The performances of staggered wall structures with added columns along the central corridor and the structures with their first story walls replaced by beams and columns were compared with those of the regular staggered wall structures. To this end incremental dynamic analyses were carried out using twenty two pairs of earthquake records to obtain the failure probabilities for various intensity of seismic load. The seismic risk for each damage state was computed based on the fragility analysis results and the probability of occurrence of earthquake ground motions. According to the analysis results, it was observed that the structures with added columns along the central corridor showed lowest probability of failure and seismic risk. The structures with their first story walls replaced by beams and columns showed lowest margin for safety.

• Tribology and Lubricants
• /
• 제23권2호
• /
• pp.43-48
• /
• 2007

Leakage reduction through annular type labyrinth seals of steam turbine is necessary for enhancing their efficiency. In this study, modified geometry of the original combination-type-staggered-labyrinth seal has been suggested and numerical analysis for leakage prediction has been carried out for the modified-combination-type-staggered-labyrinth seal both based on bulk-flow model and using the CFD code FLUENT. The theoretical analysis based on bulk-flow model yields leakage reduction of the modified combination type staggered labyrinth seal by about 11%. Comparing with the result of Bulk-flow model analysis, the leakage result of CFD analysis shows reasonable agreement within 9.8% error.

• Tribology and Lubricants
• /
• 제18권1호
• /
• pp.24-33
• /
• 2002

The basic equations are derived for the analysis of a staggered labyrinth gas seal which are generally used in high performance compressors and steam turbines. The Bulk-flow is assumed for a single cavity control volume and the flow is assumed to be completely turbulent in circumferential direction. Moody's wall-friction-factor formula is used for the calculation of wall shear stresses in the single cavity control volume. For the reaction force developed by the seal, linearized zeroth-order and first-order perturbation equations are developed for small motion about a centered position. Integration of the resultant first-order pressure distribution along and around the seal defines the rotordynamic coefficients of the staggered labyrinth gas seal. Theoretical results of leakage and rotordynamic characteristics for the staggered labyrinth gas seal are compared with those of the plain seal and see-through labyrinth seal.

• 설비공학논문집
• /
• 제14권11호
• /
• pp.871-879
• /
• 2002

The characteristics of flow and heat transfer in the heat exchanger of heat pipes with fins have been studied numerically for cooling enhancement of electronic components of KTX (Korea Train eXpress). Numerical analysis and methodology have been conformed by comparing the experimental results for inlined array of heat pipes. The staggered arrangement of heat pipes has been proposed in order to achieve heat transfer enhancement. As results, the geometry change to the staggered array is conformed to increase the heat transfer of the system accompanied by an increase of pressure drop. The current results of friction factor and Colburn j factor are presented in terms of Reynolds number and staggered distance, and are expected to use for design and manufacture of such a system.