• Journal of the Korean Wood Science and Technology
• /
• 제21권1호
• /
• pp.51-58
• /
• 1993

The phenol resorcinol formaldehyde resin (PRF) adhesives which are curing at ambient temperature for structural purposes were synthesized. A PRF resin is produced according to the two-stage reaction system. In first stage, a low-condensed resol or methylolated phenol were prepared from phenol by reaction with a formaldehyde in alkaline condition. The molar ratio of phenol to formaldehyde was 1.0~1.4. And in second-stage, resorcinol was added to combine with the methylol group of a low-condensed resol(R/P molar ratio 0.3). The glue-joint strength, pot-life and workability of this synthetic PRF resin were superior to conventional ambient temperature setting adhesives such as oilic urethane or water based polymer-isocyanate resin for wood adhesives.

• 한국항해학회지
• /
• 제17권4호
• /
• pp.31-42
• /
• 1993

The purpose of this study was to find out the most approriate international marketing strategy of Korean shipping firms for Uruguy Round expected to be agreed among GATT members in 1993. In literature sur-vey, the service marketing philosophy was reviewed to clarify the functions and roles of marketing concept in setting up the international marketing strategies for shipping firms. The marketing concepts are characterized as follows ; 1) production-oriented stage, 2) sales-oriented stage, 3) marketing-oriented stage in the order of historical development. An comparative analysis was car-ried out to examine the differences in marketing strategies among Korean shipping firms and U.K. ship-ping firms.

• 한국건축시공학회지
• /
• 제9권3호
• /
• pp.95-101
• /
• 2009

Constructing large-scale mat foundation mass concrete is increasing for the stability of building structure, because a lot of high rise building are being built in order to make full use of limited space. However, It is of increasing concerns that because limited placing equipments, available job-site and systems for mass concete placement in construction field do not allow to place great quantity of concrete at the same time in large scale mat foundation, consistency between placement lift can not be secured. And also, it is likely to crack due to stress caused by the difference of hydration heat generation time. To find out the solution against above problems, this study is to reconfirm the performance of normal concrete designed by mix proportion and super retarding concrete. The Fundamental test shows what happens if low heat proportioning and control method of setting time are applied at the job-site of newly constructed high rise building. The test result show that slump flow of concrete has been somewhat increased as the target retarding time gets longer, while the air content has been slightly decreased but this is no great difference from normal concrete. The setting time shows to be retarded as target retarding time gets longer, the range of retarding time increases. It is necessary to increase the amount of mix of super retarding agent in the proportion ration by setting curing temperature high since outdoor curing is about 6 hours faster than standard curing, which means the temperature of the concrete will be higher than the temperature of the surrounding environment, due to its high hydration heat when applying in a construction site. The compressive strength of super retarding concrete appears to be lower than normal concrete due to the retarding action in the early stage. However, as the time goes by, the compressive strength gets higher, and by the 28th day the strength becomes the same or higher than normal concrete.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.235-241
• /
• 2004

Computations were performed to investigate the effects of air staging on combustion in three stage heavy-oil fired combustion burner. The burner was designed for 3 MW. Different amounts of air are introduced into each 3 three stages by means of each dampers. The goal of the study is to understand combustion phenomena according to each air stage mass ratios through CFD. Air flow rates at three inlets are adjusted by dampers inside a burner. Here, injection conditions of liquid fuel are kept constant throughout all simulations. This assumption is made in order to limit the complexity of oil combustion though it may cause some disagreement. In case of cold flows, only longitudinal velocities arc considered, On the other hand, flow, temperature and NOx generations are taken into account for reactive flows. Simple parametric study was conducted by setting 1'st air stage mass ratio as a parameter. And an optimal operation condition was found. The computational study is based on k-e model, P-1 radiation model(WSGGM) and PDF, and is implemented on a commercial code, FLUENT.

• 대한간호학회지
• /
• 제30권2호
• /
• pp.366-379
• /
• 2000

The purpose of this study was to identify causal relationships among variables of transtheoretical model for exercise in the elderly A predictivel model explaining the stage of change was constructed based on a transtheoretical model. Empirical data for testing the hypothetical model was collected from 198 old adults over 60 years old in a community setting in Seoul, Korea in April and May,1999. Data were analyzed by descriptive statistics and correlational analysis using pc-SAS program. The Linear Structural Modeling (LISREL) 8.0 program was used to find the best fit model which predicts causal relationship of variables. The fit of the hypothetical model to the data was X2=132.85. (df=22, p=.000). GFI=.88, NNFI=.35, NFI=.77, AGFI=.59 which was not favorable but the fit of modified model to the data was X2=46.90. (df=27, p=.01).GFI= .95, NNFI=.91, NFI=.92, AGFI=.87) which was more than moderate. The predictable variables of stage of change for exercise of the Korean elderly were helping relationship, self cognitive determination, conversion of negative condition in process of change and efficacy for exercise. These variables explained 68% of stage of change for exercise of the Korean elderly.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.541-547
• /
• 2000

Experiments were done for the comparison of performance and flow characteristics between a two stage axial flow fan and a counter-rotating axial flow fm. The fan performance curves were obtained by the Korean Standard Testing Methods for Turbo Fans and Blowers (KS B 6311). The fan flow characteristics were measured using a five-hole probe by the non-nulling method. Each stage of the two stage axial flow fan used for the present study has an eight bladed rotor and thirteen stator blades. The front and the rear rotor of the counter-rotating axial flow fan have eight blades each and are driven by coaxial counter rotating shafts through a gear box located between the rear rotor and the electric motor. Both of the two axial fan configurations use identical rotor blades and the same operating conditions for the one-to-one comparison of the two. Performance characteristics of the two configurations were obtained and compared by varying the blade setting angles and axial gaps between the blade rows. The passage flow fields between the hub and tip of the fans were measured and analyzed for the particular operating conditions of peak efficiency, minimum and maximum pressure coefficients.

• Journal of Hospice and Palliative Care
• /
• 제23권2호
• /
• pp.85-92
• /
• 2020

Purpose: In 2018, the Act on Decisions on Life-Sustaining Treatment for Patients in Hospice and Palliative Care or at the End of Life was implemented and the scope of official recognition for terminally ill patients was expanded. The purpose of this study was to investigate the decisions made by patients with end-stage liver disease about their life-sustaining treatment in a clinical setting. Methods: The subjects of this study were patients with end-stage liver disease hospitalized at a tertiary hospital in Seoul, Korea who wrote physician orders for life-sustaining treatment (POLST). Data collection was done using patients' electronic medical records, and a retrospective analysis of POLST was conducted. Results: Among 101 patients, 18.8% were female and 81.2% were male, and their mean age was 61.8 (±10.61) years. Sixty-three patients (62.4%) wrote their POLST by themselves. Three patients withdrew the POLST, of whom two did so for liver transplantation, and one did so for chemotherapy. Conclusion: This study shows that sufficient consideration of liver transplantation is needed for end-stage liver disease patients before making decisions on life-sustaining treatment. The self-determination of patients must be respected and effective guidelines are urgently needed.

• 생물환경조절학회지
• /
• 제16권3호
• /
• pp.194-198
• /
• 2007

시설 토마토 과실의 상품성을 향상시키기 위하여 칼륨 엽면처리 농도 및 시기를 분석한 결과, 0.5% 칼륨 엽면처리구에서 과중이 $200{\sim}400g$인 상품과 비율이 75.5%로 대조구에 비해 29.5%증가하였다. 처리시기는 착과기가 가장 좋았는데, 착과기에 0.5% 칼륨를 엽면처리하면 상품과 비율이 대조구에 비해 5.9% 증가하였고 상품수량은 10% 증가하였다.

• 한국항공우주학회지
• /
• 제47권6호
• /
• pp.460-467
• /
• 2019

본 논문은 지대지 유도탄 체계의 개념 설계를 위한 다목적 최적화(MOO) 프레임워크를 제안한다. 제안된 프레임워크를 통해 연구 개발 과정의 초기 단계에 체계 수준에서 trade-off를 수행하기 위한 파레토 프론트를 도출 할 수 있다. 제안된 프레임워크는 모델의 추가 및 변경이 용이하도록 네 가지 기능 모듈(환경 설정 모듈, 변수 설정 모듈, 다분야 분석 모듈 및 최적화 모듈)로 구성되었으며, 이를 활용한 개념 설계 프로세스를 통해 개발 초기 단계에 다양한 설계안에 대한 검토를 수행하는 목적을 달성할 수 있었다. 프레임 워크의 효과를 보여주는 사례 연구를 제시하여 체계 설계에 적용 가능성을 확인하였고, 초기 개념 설계 단계에서 신뢰도와 계산시간 감소를 확보할 수 있는 설계 환경을 제시하는데 기여할 수 있었다.

• Industrial Engineering and Management Systems
• /
• 제8권4호
• /
• pp.228-238
• /
• 2009

This paper first presents two supply chain design problems: 1) a factory location setting and factory selection problem, and 2) a factory location setting and factory/supplier selection problem. The first involves a number of location known retailers choosing one factory to supply their demands from a number of factories whose locations are to be determined. The goal is to minimize the transportation and manufacturing cost to satisfy the demands. The problem is then augmented into the second problem, where the procurement cost of the raw materials from a chosen material supplier (from a number of suppliers) is considered for each factory. Economic beneficial is taken into account in the cost evaluation. Therefore, the partner selections will influence the cost of the supply chain significantly. To solve these problems, an agent gaming and genetic algorithm hybrid method (AGGAHM) is proposed. The AGGAHM consecutively and alternatively enable and disable the advancement of agent gaming and the evolution of genetic computation. Computation results on solving a number of examples by the AGGAHM were compared with those from methods of a general genetic algorithm and a mutual frozen genetic algorithm. Results showed that the AGGAHM outperforms the methods solely using genetic algorithms. In addition, various parameter settings are tested and discussed to facilitate the supply chain designs.