• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.41-46
• /
• 2006

When new weapons are introduced, the target points estimation is one of the important objectives in the flight test as well as the safe separation. The prediction methods help to design the flight test schedule. However, the incremental aerodynamic coefficients in the aircraft flow field so-called BSE are difficult to predict. Generally, the semiempirical methods such as the grid methods, IFM and Flow TGP using database are used for estimation of BSE. However, these methods are quasi-steady methods using static aerodynamic loads. Nowadays the time-accurate CFD method is often used to predict the store separation event. In the current process, the incremental aerodynamic coefficients in BSE regime are calculated directly, and the elimination of delta coefficients is checked simultaneously. This stage can be used for the initial condition of Flow TGP with freestream database. Two dimensional supersonic and subsonic store separation problems have been simulated and incremental coefficients are calculated. The results show the time when the store gets out of BSE region.

• Bulletin of the Korean Chemical Society
• /
• 제22권6호
• /
• pp.570-574
• /
• 2001

Magnesium isotope separation was investigated by chemical ion exchange with the 1-aza-12-crown-4 bonded Merrifield peptide resin using an elution chromatographic technique. The capacity of the novel azacrown ion exchanger was 1.0 meq/g dry resin. The heavier isotopes of magnesium were enriched in the resin phase, while the lighter isotopes were enriched in the solution phase. The single stage separation factor was determined according to the method of Glueckauf from the elution curve and isotopic assys. The separation factors of $^{24}Mg^{2+}$-$^{25}Mg^{2+}$, $^{24}Mg^{2+}$-$^{26}Mg^{2+}$, and $^{25}Mg^{2+}$-$^{26}Mg^{2+}$ were 1.008, 1.019, and 1.006, respectively.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1336-1345
• /
• 2002

A triboelectrostatic separation system using a fluidized bed tribocharger for the removal of PVC material in the mixture of PVC/PS plastics is designed and evaluated as a function of electric field strength, air flow rate, and the mixing ratio of two-component mixed plastics. It consists of a fluidized-bed tribocharger, a separation chamber, a collection chamber and a controller. PVC and PS particles can be imparted negative and positive surface charges, respectively, due to the difference in the work function values of plastics suspended in the fluidized-bed tribocharger, and can be separated by passing them through an external electric field. Experimental results show that separation efficiency is strongly dependent on the electric Deld strength and particle mixing ratio. In the optimum conditions of 150 Ipm air flow rate and 2.6 kV/cm electric field strength a highly concentrated PVC (99.1%) can be recovered with a yield of more than 99.2% from the mixture of PVC and PS materials for a single stage of processing.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권2호
• /
• pp.1-18
• /
• 2001

A numerical technique for simulating the separation dynamics of strap-on boosters jettisoned in the dense atmosphere is presented. Six degree of freedom rigid body equations of motion are integrated into the three-dimensional unsteady Navier-Stokes solution procedure to determine the dynamic motions of strap-ons. An automated Chimera overlaid grid technique is introduced to achieve maximum efficiency for multi-body dynamic motion and a domain division technique is implemented in order to reduce the computational cost required to find interpolation points in the Chimera grids. The flow solver is validated by comparing the computed results around the Titan IV launch vehicle with experimental data. The complete analysis process is then applied to the. H-II launch vehicle, the central rocket in japans space program, the CZ-3C launch vehicle developed in China and the KSR-III, a three-stage sounding rocket being developed in Korea. From the analyses, separation trajectories of strap-on boosters are predicted and aerodynamic characteristics around the vehicles at every time interval are examined. In addition, separation-impulse devices generally introduced for safe separation of strap-ons are properly modeled in the present paper and the jettisoning force requirements are examined quantitatively.

• 한국분무공학회지
• /
• 제7권2호
• /
• pp.7-15
• /
• 2002

A particle flow visualization, electrostatic charging measurement and separation of triboelectrically charged particles in the external electric field by a fluidized bed tribocharger are conducted for the removal of PVC particles from mixed waste plastics. The laboratory-scale triboelectrostatic separation system consists of the fluidized bed tribocharger, a separation chamber, a collection chamber and a controller. PVC and PET particles can be imparted negative and positive surface charges respectively due to the difference of triboelectric charging series between particles and particles in the fluidized bed tribocharger, and can be separated by passing them through an external electric field. To visualize these charged particles, He-Ne laser is used with cylindrical lenses to generate a sheet beam. In the charging measurement, the particle motion analysis system (PMAS), capable of determining particle velocity and diameter. is used to non-intrusively measure particle behavior in high strength electric field. The average charge-to-mass ratios of PVC and PET particles are $1.4\;and\;1.2{\mu}C/kg$, respectively. The highly concentrated PVC (91.9%) can be recovered with a yield of about 96.1% from the mixture of PVC and PET materials for a single-stage processing. The triboelectrostatic separation system using the fluidized tribocharger shows the potential to be an effective method for removing PVC from mixed plastics for waste plastic recycling.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1717-1722
• /
• 2003

In this paper we developed flip-chip bonder using XY stage, liner-rotary actuator and vision system. We depicted the major parts of the developed flip-chip bonder. Then we discussed several problems and their solutions such as vision and motion control, pick-up module position accuracy, separation of chip from the blue taped hoop, etc. We used a post guide to improve the horizontal positional accuracy against the long arm. Also, we used an ejector module and synchronization technique for easy chip separation from the blue tape.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1998년도 제10회 학술강연회논문집
• /
• pp.15-15
• /
• 1998

The problem of the impingement of a sonic or a supersonic jet on a flat surface has not only wide applications but has also interesting and very complex flow phenomena. The main applications of this impinging jet include prediction of solid surface erosion, design of launcher systems, stage separation of multi-stage rocket system, V/STOL operations, thermal spray system, and manufacturing technologies of materials. Much have been learned about the supersonic impinging jet flow field but many fundamental questions have not been answered satisfactorily. The problem encompasses many facets of fluid dynamics which, in combination, present the compressibility effect and the viscous-inviscid interaction, coupled with flow separation and reattachment. What is more, there are many flow parameters that have on the impinging jet flow field, for example, Mach number, Reynolds number, pressure ratio, distance between the nozzle exit and flat plate, jet shock structure, nozzle diameter and etc. Thus the existing data on the supersonic impinging jet flow present considerable disagreement in which quantitative comparison between one result and another is often impossible.

• 멤브레인
• /
• 제22권4호
• /
• pp.251-257
• /
• 2012

n-Pentane의 분리 및 회수를 위해 분리막의 제조가 용이하고 유기용매에 대한 내용매성이 있는 polyetherimide (PEI)를 지지체로 poly (dimethyl siloxane) (PDMS)를 코팅하여 중공사 복합막을 제조하였다. 제조된 기체 분리막의 특성을 알아보기 위하여 n-Pentane과 질소를 이용하여 공급농도와 stage cut의 변화에 따른 n-pentane과 질소의 투과도, permeate, retentate의 농도, 농축도, 회수율을 측정하였다. n-pentane과 질소의 투과도는 각각 2485.3, 9.9 GPU를 나타내었고, stage cut이 감소하고 공급농도가 증가할수록 투과측의 n-pentane 농도는 증가하는 경향을 나타내었다. 반면 회수효율의 경우에는 stage cut이 증가할수록 공급농도가 감소할수록 증가하는 경향을 나타내었다.

• 멤브레인
• /
• 제23권5호
• /
• pp.384-391
• /
• 2013

DME 제조공정에서 발생하는 혼합가스 중, $CO_2$를 제거하기 위하여 폴리술폰 고분자를 이용하여 지지체 중공사막을 제조하고, Hyflon AD를 코팅하여 복합막을 제조하였다. 제조된 중공사막을 이용하여 Flaring 모사가스에 대한 모듈의 성능을 측정하였다. 분리막 1단 평가 결과 1.2 MPa에서 Stage cut 0.24 이상의 $CO_2$농도는 3% 이하이며, 동일조건에서 $CO_2$ 제거율 및 $CH_4$ 회수율은 각각 약 80%이다. 분리막 2단 평가결과 Product 가스의 $CO_2$ 농도를 5%로 고정하였을 때, stage cut 0.074에서 recycle 되는 $CO_2$ 농도는 공급가스와 같은 농도를 가지며, 이때 $CH_4$의 회수율은 약 99%이다.

• 대한치과교정학회지
• /
• 제34권1호
• /
• pp.71-81
• /
• 2004

치아의 맹출 과정과 치간이개로 유도된 치아 및 치조골의 흡수 과정에서 치주인대 세포와 치주인대 단백질의 기능을 알아보기 위하여, 발육 중인 흰쥐를 치근 형성 전, 치근 형성 시작과 치근 형성 및 맹출 시기로 구분하여 조직 표본을 제작하고, 또한 성 장 중인 흰쥐를 2주간 치간 이개시켜 조직표본을 제작하였다. 치주인대 섬유모세포에서 특이적으로 발현되며 치주인대의 분화와 성숙에 관여하는 PDLs22단백질과 치아와 치조골의 파괴와 흡수를 조절하는 것으로 알려진 RANKL과 OPG의 발현을 면역 조직화학적으로 연구하였다. PDLs22 단백질은 치근 형성이 시작되면서부터 치낭세포와 골모세포에서 발현되어, 치아가 맹출하는 과정에서도 그 발현이 계속 유지되었으나, 치간이개에 의하여 치주인대가 개조되는 부위에서는 발현이 감소하였다. RANKL은 치근형성 과정에서는 미약한 발현을 나타내었으나, 치아가 맹출하면서 발현이 증대되었으며, 치간이개에 의한 치근과 치조골 흡수과정에서는 치주인대세포, 골모세포, 치수세포 및 파치세포에서 발현이 증대되었다. OPG는 치근이 형성되는 시기에는 강한 발현을 보였으나, 치아가 맹출하면서 발현이 현저히 감소하였고, 치아와 치조골의 흡수가 진행됨에 따라서 발현이 다소 감소하였다.