• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.497-500
• /
• 2000

There are many researches to increase bandwidth of the microstrip patch antenna for wireless LAN. In spite of broad bandwidth, Bow-Tie microstrip patch antenna, broadband microstrip patch antenna, has disadvantages that are low gain and big size. In this paper, stacked Bow-Tie microstrip patch antenna for wireless LAN is designed in 5.725∼5.825㎓ band. This antenna has characteristics that are broadband bandwidth, high gain and small size compared with microstrip patch antenna. In simulated results, the return loss is -34.2㏈ at 5.78㎓ and bandwidth is 11.345% for VSWR 2：1 and 7.75% for VSWR 1.5：1. In measured results, the return loss is -38.45㏈ at 5.78㎓ and bandwidth is 13% for VSWR 2：1 and 5.6% for VSWR 1.5：1. It has 59.37$^{\circ}$-3㏈ beam width and 6.5㏈ gain.

• 센서학회지
• /
• 제3권1호
• /
• pp.78-82
• /
• 1994

Single-phase $CuInS_{2}$ 박막을 제작하고 열처리에 따른 특성을 분석하였다. 박막제작은 S, In 및 Cu를 차례로 적층시킨 다음 질소분위기에서 열처리를 하여 Chalcopyrite 구조인 $CuInS_{2}$ 박막으로 전환시켰다. 제작된 박막은 p-형이었고 저항률은$0.03{\sim}0.007{\Omega}cm$였으며, Hall 이동도는 $0.07{\sim}0.1cm^{2}V^{-1}S^{-1}$ 그리고 Hall 농도는 $10^{20-21}cm^{-3}$이었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.402-407
• /
• 2002

Laminate tooling process is a fast and simple method to make metal tools directly for various molding processes such as injection molding in rapid prototyping field. Metal sheets are usually cut, stacked, aligned and joined with brazing or soldering. Through the joining process, all of the metal sheet layers should be rigidly joined. When joining process parameters are not appropriate, there would be defects in the layers. Among various types of defects, non-bonded gaps of the tool surface are of great importance, because they directly affect the surface quality and dimensional accuracy of the final products. If a laminate tool with defects has to be abandoned, it could lead to great loss of time and cost. Therefore a repair method for non-bonded gaps of the surface is essential and has important meaning for rapid prototyping. In this study, a rapid laminate tooling system composed of a CO2 laser, a furnace, and a milling machine was developed. Metal sheets were joined by furnace brazing, dip soldering and adhesive bonding. Joined laminate tools were machined by a high-speed milling machine to improve surface quality. Also, repair brazing and soldering methods of the laminates using the $CO_2$ laser system have been investigated. ill laser repair process, the beam duration, beam power and beam profile were of great importance, and their effects were simulated by [mite element methods. The simulation results were compared with the experimental ones, and optimal parameters for laser repair process were investigated.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.53-56
• /
• 2012

We have developed a slab-type Nd:YAG gain module based on the techniques of conduction cooling and end pumping. The Nd:YAG slab is end-capped on both ends by undoped pure YAG and is pumped through the end-caps by stacked arrays of laser diode bars. The slab's surfaces of total internal reflection are in contact on both sides with microchannel cooling blocks which are cooled by water circulation. The power oscillator based on the gain module generates more than 400 W at 1-kW pumping with a slope efficiency of 55%. The small-signal gain of the gain module is 10 in a single zig-zag pass, and the amplified beam shows a near diffraction-limited beam quality.

• Applied Microscopy
• /
• 제42권4호
• /
• pp.218-222
• /
• 2012

Modern aberration-corrected transmission electron microscope (TEM) with appropriate electron beam energy is able to achieve atomic resolution imaging of single and bilayer graphene sheets. Especially, atomic configuration of bilayer graphene with a rotation angle can be identified from the direct imaging and phase reconstructed imaging since atomic resolution Moir$\acute{e}$ pattern can be obtained successfully at atomic scale using an aberration-corrected TEM. This study boosts a reliable stacking order analysis, which is required for synthesized or artificially prepared multilayer graphene, and lets graphene researchers utilize the information of atomic configuration of stacked graphene layers readily.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.113-117
• /
• 2017

With the increasing use of high-power laser diode bars (LDBs) and stacked LDBs, the issue of thermal control has become critical, as temperature is related to device efficiency and lifetime, as well as to beam quality. To improve the thermal resistance of an LDB set, we propose and analyze a bypass heat sink with a top canopy structure for an LDB set, instead of adopting a thick submount. The thermal bypassing in the top-canopy structure is efficient, as it avoids the cross-sectional thermal saturation that may exist in a thick submount. The efficient thickness range of the submount in a typical LDB set is guided by the thermal resistance as a function of thickness, and the simulated bypassing efficiency of a canopy is higher than a simple analytical prediction, especially for thinner canopies.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.170-173
• /
• 2006

[ $CuInS_2$ ] filims were appeared from 0.84 to 1.27 of Cu/In composition ratio and sulfur composition ratios of $CuInS_2$ thin films fabricated, Also when Cu/In composition ratio was 1.03, $CuInS_2$ thin film with chalcopyrite structure had the highest XRD peak (112). And lattice constant (a) of and grain size of the film tin s ambient were appeared a little larger than those in only Vacuum The films in S ambient were p-type with resistive of around $10^{-1}{\Omega}cm$ and optical energy band gaps of the films in S ambient were appeared a little larger than those in only Vacuum. Analysis of the optical energy band gap of $CuInS_2$ thin films a value of 1.53eV.

• 대한전자공학회논문지TC
• /
• 제37권2호
• /
• pp.83-90
• /
• 2000

본 논문에서는 이중공진 및 광대역, 고이득의 특성을 갖는 적층된 원형-디스크 마이크로스트립 1×4 배열 안테나를 차세대 이동통신인 IMT-2000시스템(상향링크: 1.885 GHz∼2.025 GHz, 하향링크: 2.11 GHz∼2.2 GHz)기지국에서 응용할 수 있도록 설계 제작 및 실험하였다. 실험결과 상향:l.885 GHz, 하향:2.178 GHz로 원하는 주파수대에서 정확히 이중 공진하고, 궤환 손실은 -30.19dB, -24.99dB로 나타났으며 VSWR은 각각 1.06, 1.43, 그리고 VSWR<2 에서의 대역폭 402 MHz, -3dB 빔 폭은 1.88 GHz에서( αE :16.8。, αH : 69。), 2.178 GHz에서(αE:15.2。, αH:51.5。)를 갖고, 이득은 사용 하고자 하는 주파수 전반에 거쳐 약 13.7 dBi∼15.21 dBi의 이득을 얻었다.

• 한국전자파학회논문지
• /
• 제11권8호
• /
• pp.1455-1461
• /
• 2000

무선 LAN용 안테나로 주로 사용하는 마이크로스트립 패치 안테나에 대역폭을 증가시키기 위한 여러 가지 연구가 활발히 이루어지고 있다. 광대역 마이크로스트립 패치 안테나인 Bow-Tie 마이크로스트립 패치 안테나의 경우 대역폭이 비교적 넓지만 상대적으로 이득이 낮고 크기도 크다는 단점이 있다. 본 논문에서는 넓은 대역폭을 가지며 중심푸자수에서 상대적으로 이득이 높고 작은 크기를 가지는 적층 구조의 Bow-Tie 마이크로스트립 패치 안테나를 무선 LAN용 주파수인 5.725~5.825GHz 대역에 맞추어 설계하였다. 제안된 안테나는 모의 실험상에서 중심주파수가 5.78GHz일 때 반사손실이 약 -34.2 ㏈이고 VSWR 2:1 일 때 약 11.34%, VSWR 1.5:1일 때 7.4%의 대역폭을 가지며 제작된 실제 적층 구조의 Bow-Tie 마이크로스트립 패치 안테나의 경우 반사손실이 5.78 GHz에서 약 -38.45 ㏈이며 VSWR 2:1일 때 약 13%, VSWR 1.5:1일 때 5.6%의 대역폭을 가지며, -3㏈ 빔폭은 73.16$^{\circ}$, 6.5 ㏈의 이득을 가졌다.

• 한국표면공학회지
• /
• 제46권6호
• /
• pp.258-263
• /
• 2013

4 mol% Yttria-stabilized zirconia (4YSZ) coatings are fabricated by Air Plasma Spray (APS) and Electron Beam Physical Vapor Deposition (EB-PVD) with top coating of thermal barrier coating (TBC). NiCrAlY based bond coat is prepared as 150 ${\mu}m$ thickness by conventional APS (Air Plasma Spray) method on the NiCrCoAl alloy substrate before deposition of top coating. Each 4YSZ top coating shows different tribological behaviors based on the inherent layer structures. 4YSZ by APS which has splat-stacked structure shows lower friction coefficient but higher wear rate than 4YSZ by EB-PVD which has columnar structure. For 4YSZ by APS, such results are expected due to the sliding wear accompanied with local delamination of splats.